A customer has 2 DS1s to add between adjacent nodes in a UPSR ring. What type of circuit should you recommend?（）A、VT circuitsB、STS circuitsC、VT tunnel circuitsD、1:1 protection circuitsE、1:N protection circuits

第1题：

A customer has an existing DS5300 system attached to two Brocade switches with eight Windowsservers. The customer wants to add their System i p750 server to this SAN. From the followingchoices what is the simplest and least expensive solution for this customer？（）

• A、add twofibre HBAs to the System i and connect to the SAN
• B、add twofibre HBAs to the System i and connect to the Windows Servers
• C、add twofibre HBAs to the System i and connect to the System i using VIOS
• D、add two SAS HBAs to the Systemi array and connect directly to the DS5300

第2题：

A customer needs to add three JS22 blade servers. The customer currently has three HS21 Blade servers and one LS41 4-socket Blade Server. Based upon this information，  what additional items does the customer need to purchase？ （）

• A、An IBM BladeCenter H chassis for the JS22 Blade servers
• B、A concurrent KVM daughter card
• C、A pair of IBM BladeCenter Power Supplies
• D、A second Management Module

第3题：

A customer wants to expand their current storage environment, but has floor space for only two machine frames or two racks. Their environment consists of IBM SAN Volume Controllers and IBM DS4000 systems. The DS4000 systems are at end of lease. The customer wants the maximum number of disks possible in two frames. Which of the following solutions is best for this customer?（）

• A、add one SVC
• B、install one DS8700
• C、install one DS8800
• D、install one XIV system

第4题：

A customer has one mainframe and ten open system servers in their current environment. They plan to add the servers to an IBM DS8700 system with four array sites.  How many extent pools should be created to provide the best resource utilization of the DS8700（）

• A、1
• B、2
• C、4
• D、6

第5题：

A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）

• A、Add or remove the resources in the profile, click 'apply', then 'save'.
• B、Add or remove the resources using DLPAR and change the partition profile.
• C、Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.
• D、Add or remove the resources in the system profile and reboot the managed system.

第6题：

A customer’s new rack contains 12 x p655 servers.   The customer currently has an HMC with one 128-port async adapter with a rack mounted 16-port RAN. The HMC is already attached to two pSeries p630s.  What upgrades， if any， are needed to the HMC to support the new p655 servers？（）

• A、No upgrades are needed.
• B、Add another 16-port RAN.
• C、Add an 8-port async adapter.
• D、Add an additional 128-port adapter.

第7题：

A manufacturing customer has an existing SAN for their AIX servers and they want to add theirWindows servers with file level access to their existing storage pool. Which of the following is thelowest cost solution?（）

• A、N7900 
• B、N6040 
• C、DS3300 
• D、DS3500

第8题：

You create a Web Form. The Web Form contains two Web Parts named CustomerPart and OrdersPart. CustomerPart contains a drop-down list of customers. OrdersPart contains a list of orders that a customer has placed. You need to create a static connection between CustomerPart and OrdersPart. When a user selects a customer from CustomerPart, OrdersPart must update. Which four actions should you perform? （）

• A、Add the ConnectionProvider attribute to OrdersPart.
• B、Add the ConnectionProvider attribute to CustomerPart.
• C、Add the ConnectionConsumer attribute to CustomerPart.
• D、Add the ConnectionConsumer attribute to OrdersPart.
• E、Add OrdersPart and CustomerPart to the WebParts directory.
• F、Add OrdersPart and CustomerPart to the App_Code directory.
• G、Declare the connections within a StaticConnections subtag of a WebPartZone class.
• H、Declare the connections within a StaticConnections subtag of a WebPartManager class.
• I、Define an interface specifying the methods and properties that are shared between the Web Parts.

第9题：

第10题：

第11题：

第12题：

第13题：

A customer server has the maximum local storage installed. The customer plans to share this new storage with other servers. Which of the following provides that server additional storage？（）

• A、Add External Storage via EXP3000
• B、Replace current storage with more dense drives
• C、Add External Storage via SAN
• D、Add storage expansion blade

第14题：

A customer has installed an IBM System Storage DS8700 with 20 TB of storage， two-way processor version， 32 GB cache， and 16 Fibre Channel ports. The customer is beginning to experience throughput performance issues.  To address this performance consideration with minimal cost to the customer， which of the following should be the FIRST step to resolve the problem（）

• A、add an expansion frame with additionalFibre Channel ports
• B、increase the amount of storage by 20 TB
• C、conduct a Disk Magic study to identify the source of the performance issue
• D、add additionalFibre Channel ports to the existing DS8700

第15题：

A customer wants to upgrade their existing 6-way p650 to an 8-way.  The installed inventory shows the p650 as only a 4-way.  What should the pSeries technical specialist do in order to best correct IBMinventory records？ （）

• A、Submit an RPO-MES to add the missing 2-way processor card.
• B、Submit an MES order to add the missing 2-way processor card.
• C、Request VPD from the customer and then submit an RPO-MES request.
• D、Request VPD from the customer and then submit an MES order to add the missing 2-way processor card.

第16题：

A customer’s small heterogeneous enterprise has grown over time to more than 500 client systems， and the administrator cannot add new servers to the management database.  Which of the following is the most likely source of the problem？（）

• A、The management server has reached its size limitation.
• B、Additional agent licenses must be purchased.
• C、The CPU and Memory requirements need to be upgraded.
• D、The default JET database has reached its size limitation.

第17题：

A customer has been working with your company to purchase an iDataPlex cluster. They have a configuration from IBM and are getting ready to place an order. Which should be done of the following？（）

• A、A solution sizing questionnaire
• B、Verify the customer has the proper racks
• C、A Technical Delivery Assessment
• D、Verify the customer has enough cooling in the computer room

第18题：

A customer has an IBM System Storage DS5000 and needs to add more disk drives to the unit.There is no record of the configuration for this machine. How can the configuration be retrieved soan upgrade can be configured？（）

• A、use Storage Manager to export the system profile
• B、create a configuration ineConfig and provide proof of purchase
• C、use the IBM Standalone Systems Configuration Tool （SSCT） to recreate the configuration
• D、have the customer contact the IBM AAS coordinator to retrieve a copy of the originalconfiguration

第19题：

A customer has 6.5 TB with 146 GB 15k disk drives on an IBM System Storage DS8700. They want to add 15 TB using 300 GB 15k disk drives. The customer is concerned about performance and wants to know if the DS8700 has the performance capability.  What is the appropriate way to  model the performance（）

• A、Disk Magic
• B、Capacity Magic
• C、test the workload at an IBM Benchmark Center
• D、test the solution with IBM Storage Performance Center

第20题：

You need to design an access control strategy for the Contact Info and the Order History folders. What should you do？（）

• A、Create a domain local group named Customer Relations in the northwindtraders.com domain. Add the Sales group and the Sales Managers groups to the Customer Relations group. Add the Customer Relationships group to the Customer Information folder. Assign the appropriate permissions. Add the accounts for the sales department users in Boston to the Boston Customer Relationship group. Add the Boston Customer Relationships group to the Customer Relations group. Disable inheritance on the Payment folder
• B、Create a domain local group named Customer Relations in the boston.northwindtraders.com domain. Add the Customer Relations group to the Customer Information folder. Assign the appropriate permissions. Add the Boston Customer Relations group to the Customer Relations group. Disable permission inheritance on the Payment folder
• C、Create a domain local group named Customer Relations in the boston.northwindtraders.com domain. Add the Customer Relations group to the Order History folder. Assign the appropriate permissions. Add the Boston Customer Relations group to the Customer Relations group. Disable permission inheritance on the Payment folder
• D、Create a domain local group named Customer Relations in the boston.northwindtraders.com domain. Add the Customer Relations group to the Customer Information folder. Assign the appropriate permissions. Add the Boston Customer Relations group to the Customer **MISSING**

第21题：

第22题：

第23题：