An administrator setting up software RAID 1 on a Windows Server with two volumes for two separate hard drives, but the option for mirrored is grayed out. Which of the following is the MOST likely reason why this is occurring?()
第1题:
There is a power outage and all servers are shut down properly by the uninterruptible power supply (UPS) software. When one of the servers starts up it displays a logical drive failed error. This server has two processors, 16GB of memory, and a RAID 5 array with 10 drives.Which of the following is the MOST likely cause?()
A. A failed RAID controller
B. Two failed processors
C. Two failed sticks of memory
D. Two failed drives
第2题:
An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAIDarray. When the administrator reaches the option to select the target installation drive, there are no drives listed. Which of the following is the FIRST thing the administrator should do?()
第3题:
A server has five hot pluggable SCSI disk drives in a RAID 5 array. The server OS crashed and the server will not boot. The administrator noticed that all of the disk drives have gone offline.Which of the following components would MOST likely have caused the problem?()
第4题:
Which of the following RAID arrays should be used to achieve the MOST performance?()
第5题:
Which of the following is MOST likely the reason a technician would implement software RAID for a SOHO environment?()
第6题:
An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array.When the administrator reaches the option to select the target installation drive, there are no drives listed. Which of the following is the FIRST thing the administrator should do?()
第7题:
A customer needs to install a database on a server. Which of the following statements describes how to modify the RAID configuration for optimal performance?()
第8题:
The disks have been setup as basic.
The page file must be at least 4GB to support mirrored drives.
The disks have been setup as dynamic.
Windows does not support software RAID 1.
第9题:
Restart the installation via WDS.
Shut down the server and check that all RAID drives are connected properly.
Restart the installation from CD and press F6 to install RAID drivers.
Go into the BIOS and set all RAID drives to compatibility mode.
第10题:
Memory
SCSI backplane
SCSI drives
Motherboard
第11题:
The disks have been setup as basic.
The page file must be at least 4GB to support mirrored drives.
The disks have been setup as dynamic.
Windows does not support software RAID 1.
第12题:
Four drives with RAID 0
Three drives with RAID 5
Four drives with RAID 10
Two drives with RAID 50
第13题:
A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system’s administrator has decided to mirror two drives for the operating system. Which of the following is the maximum space the administrator will have remaining to use for data when using RAID 0?()
第14题:
An administrator setting up software RAID 1 on a Windows Server with two volumes for twoseparate hard drives, but the option for mirrored is grayed out. Which of the following is the MOST likely reason why this is occurring?()
第15题:
An administrator attempts to install the latest security patches for an older server. When the administrator runs the patch installer, the install fails. The administrator tries again, and the installer fails again. Which of the following is the MOST likely reason for this?()
第16题:
An administrator is setting up software RAID 5 on a Windows Server with two volumes for two separate hard drives, but the option for RAID 5 is grayed out. Which of the following is the MOST likely reason why?()
第17题:
There is a power outage and all servers are shut down properly by the uninterruptible power supply(UPS) software. When one of the servers starts up it displays a logical drive failed error. This server has two processors,16GB of memory, and a RAID 5 array with 10 drives. Which of the following is the MOST likely cause?()
第18题:
Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?()
第19题:
x366
x255
x346
x455
第20题:
The disks have been setup as basic.
The page file must be at least 4GB to support mirrored drives.
The disks have been setup as dynamic.
Windows does not support software RAID 1.
第21题:
The disks have been setup as dynamic.
Windows does not support software RAID 5.
Raid 5 requires three volumes.
The page file must be at least 4GB to support RAID 5.
第22题:
Have one VIO server with striped disks for all LPARs
Have one VIO server with mirrored disks for all LPARs
Have two VIO servers with each LPAR accessing both VIO servers
Have two VIO servers with each LPAR accessing a different VIO server
第23题:
A failed RAID controller
Two failed processors
Two failed sticks of memory
Two failed drives