Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）A、Format the partitionB、Load any RAID or SATA drivers neededC、Partition the driveD、Configure Windows settings

第1题：

A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）

• A、Have the client purchase a SATA compatible system board.
• B、Have the client purchase a SATA to IDE conversion kit.
• C、Have the client return the drive and purchase an IDE compatible drive.
• D、Have the client purchase a SCSI to SATA conversion kit.

第2题：

You are the administrator of ExamSheet's network.  The software department is preparing to rewrite an accounting application so that it will run on  Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You plan to configure the computers in the software department so that users can use both Windows 98 and Windows 2000 Professional during the project. You want to ensure that users in the software department can access all of the files on their computers while using operating system.  What should you do?（）

• A、Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create a primary partition in the remaining disk space and format the volume using the FAT32 file system.Reinstall Windows 98 on the new primary partition. 
• B、Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create an extended partition in the remaining disk space and format the volume using the FAT32 file system. Reinstall Windows 98 on the new extended partition. 
• C、Create and format and extended partition. Create a logical drive within the extended partition and format the drive with the FAT32 file system. Install Windows 2000 Professional on the new partition. 
• D、Create and format an extended partition. Create a logical drive within the extended partition and format the drive with the NTFS file system. Install Windows 2000 Professional on the new partition.

第3题：

A PC cannot connect to the network. A network card was purchased without documentation ordriver discs. Which of the following is the BEST way to install it into this machine?（）

• A、Download and install the drivers
• B、Run Windows update to install drivers
• C、Copy drivers to flash drive and install
• D、Purchase the disc online and install

第4题：

A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

• A、Add another hard drive and use that available space.
• B、Run FDISK.
• C、Use the Disk Management tool.
• D、Back up all important data to an external drive then reformat the hard drive.

第5题：

Which of the following methods can be used to apply a file system to a hard drive partition?（）

• A、Device Manager MMC
• B、Format Command
• C、Disk Management MMC
• D、Windows Explorer Menus
• E、FDISK Command

第6题：

The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）

• A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.
• B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.
• C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.
• D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.

第7题：

A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

• A、Windows cannot be booted from a controller card.
• B、The hard drive must have Windows reinstalled because a new controller card was installed.
• C、The SATA controller card was not set as a boot device in the computer BIOS.
• D、The new controller must have the correct jumper settings for Windows mode.

第8题：

You need to configure a new computer to dual-boot to the following operating systems：  Microsoft Windows XP Professional Microsoft Windows Vista  Which two procedures should you perform？ （）

• A、Create two partitions. Install Windows XP Professional on the first partition. Boot the computer from the Windows Vista DVD-ROM. Install Windows Vista on the second partition.
• B、Create two partitions. Install Windows Vista on the first partition. Boot from the Windows XP Professional installation CD-ROM. Install Windows XP Professional on the second partition. 
• C、Create one partition. Install Windows XP Professional on the partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista in the same partition. 
• D、Create two partitions. Install Windows XP Professional on the first partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista on the second partition.

第9题：

Which of the following BEST describes the initial process of setting up a new operating system from a CD-ROM? （）

• A、Format a partition, install device drivers, and install the operating system.
• B、Create a partition, format the partition, and install the operating system.
• C、Install the operating system, create a partition, and install device drivers.
• D、Install the operating system, install device drivers, and create a partition.

第10题：

第11题：

第12题：

第13题：

A customer’s support technician finished installing their new x366 server running Windows 2003 Enterprise Server and the IBM Director agent.  The customer applied the latest BIOS and firmware drivers available on the Web for the system.  The problem is that the x366 runs for a few minutes and then reboots itself.  Which of the following should be checked first？（）

• A、Configure the box with RAID-1 and not RAID-5.
• B、Disable Hyperthreading feature on the machine.
• C、Ensure the Watchdog timers on the RSA-II are disabled.
• D、Replace the Windows NTLDR file on the root partition from another copy of the Windows OS files.

第14题：

In which of the following places is it BEST to put the paging system file？（）

• A、 Non-system partition
• B、 System partition
• C、 Flash hard drive
• D、 External hard drive

第15题：

Which of the following should be done FIRST to a hard drive before it is disposed?（）

• A、Partition
• B、Physical damage
• C、Data wipe
• D、Format

第16题：

A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

• A、Disk Management
• B、Services and Applications
• C、Removable Storage
• D、Device Manager

第17题：

An administrator is configuring RAID 1 in a server.  The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter.  How should the administrator BEST configure these drives？（）

• A、Install one drive on the first channel and install the second drive on the second channel.
• B、Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.
• C、Install both drives on the same channel. Cable both drives as the primary master on the samecable.
• D、Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.

第18题：

Which of the following will allow a technician to extend a partition?（）

• A、Set the drive up as basic
• B、Format the drive to FAT32
• C、Install a second hard drive
• D、Set the drive as dynamic

第19题：

An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array.When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）

• A、 Restart the installation via WDS.
• B、 Shut down the server and check that all RAID drives are connected properly.
• C、 Restart the installation from CD and press F6 to install RAID drivers.
• D、 Go into the BIOS and set all RAID drives to compatibility mode.

第20题：

You are a network administrator for ExamSheet.net.  You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows  NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit.  What should do? （）

• A、Create the boot drive on drive C and format as a FAT16 partition. 
• B、Create the boot drive on drive C and format as a NTFS partition.
• C、Configure the boot drive as a basic volume and format the volume as FAT32.
• D、Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition. 
• E、Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.

第21题：

第22题：

第23题：