单选题Which statement about Fibre Channel communications is correct？（）AIt operates much like TCP.BFlow control is only provided by QoS.CIt must be implemented in an arbitrated loop.DCommunication methods are similar to those of an Ethernet bus.EN_Port to N_P

题目
单选题
Which statement about Fibre Channel communications is correct？（）
A

 It operates much like TCP.

B

 Flow control is only provided by QoS.

C

 It must be implemented in an arbitrated loop.

D

 Communication methods are similar to those of an Ethernet bus.

E

 N_Port to N_Port connections use logical node connection points.

相似考题

1.An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs.For each given LPAR how should they add the PCI card to the LPAR profile?()A.Add the fibre channel card as hared?Add the fibre channel card as ?hared?B.Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?C.Add the fibre channel card as esired?Add the fibre channel card as ?esired?D.Add the fibre channel card as equired?Add the fibre channel card as ?equired?

2.Which statement about Fibre Channel communications is correct?()A. It operates much like TCP.B. Flow control is only provided by QoS.C. It must be implemented in an arbitrated loop.D. Communication methods are similar to those of an Ethernet bus.E. N_Port to N_Port connections use logical node connection points.

3.When can routine communications be resumed on a frequency or channel on which radio silence has been imposed ________．A.After determining that the frequency or channel appears to be no longer in useB.After determining that geographic distance from the distress situation will prohibit any other signal from interfering with emergency communicationsC.After the Rescue Coordination Center transmits a message on the frequency or channel being used for emergency communications stating that such traffic has concludedD.Routine communications can resume if，in the Master's opinion，communications on that frequency or channel will not interfere with emergency communications

4.Which path selection protocol is used by Fibre Channel fabrics?()A.IVRB.VoQC.FSPFD.VSANsE.SANTap

更多“Which statement about Fibre Channel communications is correc”相关问题

  • 第1题：

    A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）

    • A、 OSPF
    • B、 RIP
    • C、 FSPF
    • D、 VSANs

    正确答案:C

  • 第2题：

    A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）

    • A、OSPF
    • B、RIP
    • C、FSPF
    • D、VSANs

    正确答案:C

  • 第3题：

    Which statement is true about The QoS Class Fibre Channel？（）

    • A、 Cannot be disabled
    • B、 Cannot have the CoS changed
    • C、 Can have "Packet Drop" enabled
    • D、 Is multicast optimized
    • E、 Can have the MTU changed

    正确答案:A

  • 第4题：

    Which statement about NPIV is true？（）

    • A、 NPIV provides a means to assign multiple Fibre Channel IDs to a single N-port.
    • B、 NPIV can be enabled on a per-VSAN basis.
    • C、 NPIV requires a "write erase" and then reload the switch in order to come up into NPIV mode. 
    • D、 NPIV is a Cisco proprietary feature and as such works only between two Cisco switches.
    • E、 NPIV must not be enabled on a switch that is also running N-port virtualization.

    正确答案:A

  • 第5题：

    Which path selection protocol is used by Fibre Channel fabrics？（）

    • A、 IVR
    • B、 VoQ
    • C、 FSPF
    • D、 VSANs
    • E、 SANTap

    正确答案:C

  • 第6题：

    What types of host connectivity are available on the Storwize V7000?（）

    • A、Fibre Channel and SAS 
    • B、Fibre Channel and iSCSI 
    • C、Fibre Channel, iSCSI and SAS 
    • D、Fibre Channel, iSCSI and InfiniBand 

    正确答案:B

  • 第7题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter
    • D、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    正确答案:C

  • 第8题：

    Which IBM tape interface architecture has the best performance and distance characteristics? （）

    • A、SAS
    • B、SCSI
    • C、ESCON
    • D、Fibre Channel

    正确答案:D

  • 第9题：

    单选题
    Fibre channel requires which of the following elements？（）
    A

     FC Initiator

    B

     Multi-Mode fibre

    C

     Physical Adapter

    D

     Fibre Target Management Agent


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    When can routine communications be resumed on a frequency or channel on which radio silence has been imposed? （）
    A

    After determining that the frequency or channel appears to be no longer in use

    B

    After determining that geographic distance from the distress situation will prohibit any other signal from interfering with emergency communications

    C

    After the Rescue Coordination Center transmits a message on the frequency or channel being used for emergency communications stating that such traffic has concluded

    D

    Routine communications can resume if，in the Master's opinion，communications on that frequency or channel will not interfere with emergency communications


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Which statement about Fibre Channel communications is correct？（）
    A

     It operates much like TCP.

    B

     Flow control is only provided by QoS.

    C

     It must be implemented in an arbitrated loop.

    D

     Communication methods are similar to those of an Ethernet bus.

    E

     N_Port to N_Port connections use logical node connection points.


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true？（）
    A

     A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces. 

    B

     SAN port channels can include up to 16 interfaces.

    C

     SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.

    D

     The links in SAN port channels can be connected to different sets of switches.

    E

     The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which statement about Fibre Channel communications is correct?（）

    • A、It operates much like TCP.
    • B、Flow control is only provided by QoS.
    • C、It must be implemented in an arbitrated loop.
    • D、Communication methods are similar to those of an Ethernet bus.
    • E、N_Port to N_Port connections use logical node connection points.

    正确答案:E

  • 第14题：

    Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true？ （）

    • A、 End-host mode is synonymous with NPV mode.
    • B、 In end-host mode， only hard pinning of vHBAs to Fibre Channel uplink ports is allowed.
    • C、 Making configuration changes between Fibre Channel switching mode and end-host mode is nondisruptive.
    • D、 End-host mode is the default Fibre Channel switching mode.

    正确答案:A,D

  • 第15题：

    Which statement about Cisco Unified Fabric switches is correct？ （）   

    • A、 The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
    • B、 The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. 
    • C、 The Nexus 7000 Series Switches can support the NPIV mode of operation， but cannot function as a complete Fibre Channel Forwarder.
    • D、 The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
    • E、 The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.

    正确答案:E

  • 第16题：

    Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true？（）  

    • A、 A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces. 
    • B、 SAN port channels can include up to 16 interfaces.
    • C、 SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.
    • D、 The links in SAN port channels can be connected to different sets of switches.
    • E、 The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.

    正确答案:E

  • 第17题：

    Fibre channel requires which of the following elements？（）

    • A、 FC Initiator
    • B、 Multi-Mode fibre
    • C、 Physical Adapter
    • D、 Fibre Target Management Agent

    正确答案:C

  • 第18题：

    A customer is ready to order a pSeries solution.  However， the pSeries technical specialist is unsure whether the customer preferred the fibre channel or the external SCSI disk attachment option.  What is the most appropriate action for the specialist to take next？（）

    • A、Ask the customer to confirm which option is best for their environment.
    • B、Order the fibre channel option and purchase a converter later if necessary.
    • C、Order both SCSI and fibre channel adapters to cover both potential options.
    • D、Inform the customer that fibre channel was selected for performance reasons.

    正确答案:A

  • 第19题：

    An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile?（）

    • A、Add the fibre channel card as hared?Add the fibre channel card as ?hared?
    • B、Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?
    • C、Add the fibre channel card as esired?Add the fibre channel card as ?esired?
    • D、Add the fibre channel card as equired?Add the fibre channel card as ?equired?

    正确答案:C

  • 第20题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
    • D、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    正确答案:C

  • 第21题：

    单选题
    Which path selection protocol is used by Fibre Channel fabrics?（）
    A

    IVR

    B

    VoQ

    C

    FSPF

    D

    VSANs

    E

    SANTap


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）
    A

     OSPF

    B

     RIP

    C

     FSPF

    D

     VSANs


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host？（）
    A

     The switch receives the FCoE frame and forwards it to another switch over its VE port.

    B

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.

    C

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.

    D

     The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    Which statement is true about The QoS Class Fibre Channel？（）
    A

     Cannot be disabled

    B

     Cannot have the CoS changed

    C

     Can have Packet Drop enabled

    D

     Is multicast optimized

    E

     Can have the MTU changed


    正确答案： B
    解析： 暂无解析

相关内容