highest router ID first, then highest priority
highest MAC address first, then highest priority
highest router ID first, then highest MAC address
highest priority first, then highest router ID
highest priority first, then highest MAC address
第1题:
Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? ()
A. supports VLSM
B. link - state routing protocol
C. operati on is similar to BGP
D. supports two routing levels within an autonomous system
第2题:
Which OSPF network type is ideal for partially meshed NBMA networks because it is easy to configure(requires no configuration of neighbor commands), consumes only one IP subnet, and requires no designated router election?
第3题:
在优先权相同的情况下选举Designated Intermediate System(DIS),则()。
第4题:
What three major tasks are performed by a Designated Intermediate System in an ISIS pseudonodeenvironment?()
第5题:
Three IS-IS routers on a broadcast segment have different priority values configured. Which router is elected the DIS on that broadcast segment?()
第6题:
How often are IS-IS Hello packets transmitted?()
第7题:
3 seconds for DIS; 9 seconds for non-DIS
9 seconds for DIS; 3 seconds for non-DIS
10 seconds for DIS; 3 seconds for non-DIS
10 seconds for all routers
第8题:
highest router ID first, then highest priority
highest MAC address first, then highest priority
highest router ID first, then highest MAC address
highest priority first, then highest router ID
highest priority first, then highest MAC address
第9题:
PSNP
CSNP
LSP
IIH
ISH
第10题:
LSP
PSNP
ISH
CSNP
IIH
第11题:
最大MAC地址表示最高优先权
最大MAC地址表示最低优先权
最小MAC地址表示最高优先权
最小MAC地址表示最低优先权
第12题:
support for designated intermediate systems and backup designated intermediate systems
support for multip le areas per router
support for classless routing
support for address summarization between areas
support for both DIS adjacencies and neighbor adjacencies
第13题:
IS - IS is often considered an alternative to OSPF in the IP world. Which two statements identify similarities between IS -IS and OSPF?()
第14题:
在IS-IS中,DIS以组播地址周期性的发送CSNP报文给区域内的所有邻居。
第15题:
Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? ()
第16题:
Which of the following is used to periodically multicast by DIS on a LAN to ensure IS-IS link state databaseaccuracy?()
第17题:
Which two IS-IS hello values must match to form a Level 1 IS-IS adjacency?()
第18题:
the router with the lowest priority
the router with the highest priority
the router with the highest System ID
the router with the highest IP address
第19题:
第20题:
Updating the pseudonode LSP
maintaining pseudonode link-state information
creating the pseudonode
flooding LSPs over the LAN
election of the pseudonode
第21题:
对
错
第22题:
Router A remains the DIS and generates a new pseudonode LSP for that LAN
Router A remains the DIS and NO new pseudonode LSP is generated for that LAN
Router D becomes the new DIS, generates a new pseudonode LSP for that LAN, and purges the old pseudonode LSP generated by Router A
Router D becomes the new DIS, does NOT generate a new pseudonode LSP for that LAN, and does NOT purge the old pseudonode LSP generated by Router A
第23题:
A priority of 0 will prevent a router from becoming a DIS.
If the DIS becomes unavailable the backup DIS is promoted to DIS.
Adding a router with a higher priority than the current DIS will result in the new router becoming DIS.
Separate L1 and L2 election processes are held on a brodcast network.
L1 routers on a broadcast network only establish adjacencies with the DIS.
If there is a tie based on priority,the router whose attached interface has the lowest MAC address becomes the DIS.
第24题:
No routers are adjacent with each other.
Only Router A and Router B are adjacent at Level 1.
Only Router A and Router B are adjacent at Level 2.
All three routers are adjacent with each other at Level 1.