It creates a global address pool for all outside NAT transactions
It establishes a dynamic address pool for an inside static address
It creates dynamic source translations for all inside local PAT transactions
It creates a one-to-one mapping between an inside local address and an inside global address
It maps one inside source address to a range of outside global addresses
第1题:
A.(config) ip nat pool isp-net 1.2.4.2 netmask 255.255.255.0 overload
B.(config-if) ip nat outside overload
C.(config) ip nat inside source list 1 interface ethernet1 overload
D.(config-if) ip nat inside overload
第2题:
What is the function of the Cisco IOS command ip nat inside source static 10.1.1.5 172.35.16.5()。
第3题:
What type of services are provided by the Cisco IOS gateways in a VoIP network with Cisco CallManager functionality? ()
第4题:
What is the function of the Cisco IOS command ip nat inside source static 10.1.1.5 172.35.16.5?()
第5题:
What Cisco IOS feature can be enabled to pinpoint an application that is causing slow network performance?()
第6题:
What are two Cisco IOS commands that can be used to view neighbor adjacencies?()
第7题:
You have just installed a new web server on the Testking network. You are required to ensure that the web server is accessible from the Internet. The network uses private addressing, so an IP-to-registered address mapping is required.To do this, you enter the following command:TestKing(config)# ip nat inside source static 192.168.2.1 198.18.1.254 You unsuccessfully try to ping the Internet from a PC host on the LAN. During the troubleshooting process, you enter the "show ip nat translations" command but the output is blank. What is the most likely cause of the problem?()
第8题:
In the Cisco IOS, what is the definition of a global command?()
第9题:
A command that can be entered in any configuration mode.
A command that supports all protocols.
A command that is implemented in all IOS versions.
A command that is set once and affects the entire router.
A command that is available in every release of IOS.
第10题:
The Cisco IOS image file will not be visible in the output from the show flash command.
The show version command will not show the Cisco IOS image file location.
When the router boots up, the Cisco IOS image will be loaded from a secured FTP location.
The running Cisco IOS image will be encrypted and then automatically backed up to a TFTP server.
第11题:
password encryption service
changes to the config-register setting
the xmodem privilege EXEC mode command to recover the Cisco IOS image
ROMMON
第12题:
Static NAT
Dynamic NAT
Dynamic NAT with overload
Port Address Translation
None of the above
第13题:
静态NAT的cisco路由器的配置,正确的指令是()
第14题:
What does the "Inside Global" address represent in the configuration of NAT?()
第15题:
Which IOS security feature is configured by the ip inspect inspection-name {in | out} command?()
第16题:
A Cisco router has been configured with the following command:IP nat pool nat-test 192.168.6.10 192.168.6.20 netmask 255.255.255.0his is an example of what type of NAT?()
第17题:
In any NAT (network address translation) configuration, what is the Inside Global IP address?()
第18题:
You are logged into a router and with to view the layer 3 information about your neighboring Cisco routers. What IOS command gives layer 3 information for of the directly connected router interfaces?()
第19题:
What will be disabled as a result of the no service password-recovery command?()
第20题:
It creates a global address pool for all outside NAT transactions.
It establishes a dynamic address pool for an inside static address.
It creates dynamic source translations for all inside local PAT transactions.
It creates a one-to-one mapping between an inside local address and an inside global address.
It maps one inside source address to a range of outside global addresses.
第21题:
It creates a global address pool for all outside NAT transactions
It establishes a dynamic address pool for an inside static address
It creates dynamic source translations for all inside local PAT transactions
It creates a one-to-one mapping between an inside local address and an inside global address
It maps one inside source address to a range of outside global addresses
第22题:
debug ip bgp updates
debug ip tcp events
debug ip bgp transactions
debug ip tcp transactions
第23题:
show ip links
show cdp neighbor
show cdp neighbor detail
show ip clients
show ip route
None of the above
第24题:
Issue a show policy-map interface command.
Assuming Netflow is enabled, issue a show ip cache verbose flow command.
Issue a show crypto ipsec session command.
Issue a debug qos set command and a terminal monitor command.