DHCP has assigned the wrong addresses.
Incorrect default gateway on the server.
DNS entries were not created.
WINS server is not responding.
第1题:
The staff is not able to access a database server. The server has an ’Operating System not found’error and is set to boot from a fiber channel SAN. All other database servers are set to boot from the SAN and access the same switch and data as this database server. Which of the following is the MOST likely cause of the problem?()
第2题:
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a member server named Server1 that is configured as a DHCP server. You install a new stand-alone server named Server2 in the same subnet as Server1. You install the DHCP service on Server2.You need to ensure that Server2 can assign IP configurations to clients on the subnet. What should you do first?()
第3题:
You have two Exchange Server 2010 servers that have the Client Access, Hub Transport, and Mailbox server roles installed.The servers are members of a database availability group (DAG).You need to ensure that all users can access the Client Access server if a single server or service fails.What should you do?()
第4题:
You are designing a DNS name resolution strategy to allow all users access to internal and external web sites. What should you do?()
第5题:
You work as the Exchange administrator at Company.com.The Company.com network contains an Exchange Server 2010 Organization.Company.com has its headquarters in Paris where you are located.you are responsible for managing two exchange servers named -ex01 and -ex02.both exchange servers are configured to host the client access server role, the hub transport server role as well as the mailbox server role.terstkingex01 and -ex02 are members of a database availability group.during the course of the week you receive an instruction from management to ensure that users are able to make a connection to the client access server in the event of a single server failure. What should you do?()
第6题:
The DNS server is down.
The NIC driver on the server is malfunctioning.
The DHCP server is down.
The server’s NIC is malfunctioning.
第7题:
Join Server2 to the domain.
Restart the DCHP Server service on Server1.
From the DHCP snap-in on Server1, add Server2 by using the Add Server option.
From the DHCP snap-in on Server2, add Server 1 by using the Add Server option.
第8题:
The SAN is offline
Fiber channel switch
Multiple failed drives in the SAN
HBA
第9题:
In Site1, deploy one Client Access server.
In each site, deploy one Client Access server.
In Site1, deploy one Client Access server and one Edge Transport server.
In each site, deploy one Client Access server and one Edge Transport server.
第10题:
The SUBNET Mask was set incorrectly.
File permissions were set to no access.
An incorrect frame type was selected on the server.
The workstation service on the Windows 2000 Server failed to start.
第11题:
On Server1 and Server2, install the Client Access server role. Implement failover clustering.
On Server1 and Server2, install the Client Access server role. Configure network interface card (NIC) teaming on each server.
Deploy two new Client Access servers. Implement load balancing by using DNS round robin.Create a Client Access server array.
Deploy two new Client Access servers. Implement load balancing by using a Windows Network Load Balancing cluster. Create a Client Access server array.
第12题:
from DNS manager, create two new records for the Client Access servers.
from Failover Cluster Manager, create a new service named Client Access Server and assign a new IP address.
Install the Network Load Balancing feature on each server and assign a second IP address to each network adapter.
Deploy a hardware load balancer.Create a DNS record for the virtual IP address and configure a Client Access server array.
第13题:
An administrator gets a call that multiple users do not have network access to the company server that they have been using for five years. Users can access the other servers and computers in the building and check their home email accounts. The administrator tests the server’s Ethernet cable,verifies it works, and plugs it back into the NIC only to receive no status lights. Which of the following BEST indicates the problem?()
第14题:
You are the administrator of B & G Enterprises. Your Windows 2000 Server is configured to use the NWLink IPX/SPX compatible protocol. Your network clients also use NWLink IPX/SPX protocol. Your clients complain that they are not able to connect to the Windows 2000 Server; they can however connect to each other. What is the most likely cause of the problem? ()
第15题:
You have an Exchange Server 2010 organization. The organization contains two servers named Server1 and Server2. Server1 and Server2 have the Mailbox server role and the Hub Transport server role installed. Server 1 and Server2 are members of a database availability group (DAG). You need to plan the deployment of Client Access servers to meet the following requirements: .Users must be able to access their mailboxes if a single server fails .Users must not attempt to connect to a failed server What should you include in your plan?()
第16题:
You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain, including domain controllers, have Windows Server 2012 R2 installed.You add the DHCP Server Role on a server named ABC_SR04. You configure DHCP to support two subnets named Subnet A and Subnet B. Subnet A has a network ID of 172.16.0.0/16 and Subnet B has a network ID of 172.16.1.0/24.All client computers are reconfigured to receive IP addresses from DHCP. However, clients on Subnet B cannot access clients on Subnet A. What is the most likely cause of this problem?()
第17题:
DHCP has assigned the wrong addresses.
Incorrect default gateway on the server.
DNS entries were not created.
WINS server is not responding.
第18题:
The Server Options are not configured correctly.
The IP address for the Router is not correctly specified in the Scope Options.
The IP address for the DNS Sever is not correctly specified in the Scope Options.
The IPv6 has not been disabled on ABC_SR04.
第19题:
DHCP has assigned the wrong addresses.
Incorrect default gateway on the server.
DNS entries were not created.
WINS server is not responding.
第20题:
Your best option would be to have the Network Load Balancing feature installed on every server.Thereafter a second IP address should be assigned to every network adapter.
Your best option would be to have two new records created for the Client Access server from the DNS manager.
Your best option would be to have a hardware load balancer deployed. Then a DNS record should be created for the virtual IP address. Thereafter a Client Access server array should be configured.
Your best option would e to have a new service named Client Access Server created and a new IP address allocated from the Failover Cluster Manager.
第21题:
The temporary server was formatted as NTFS.
The manager is a power user on the temporary server.
The temporary server was formatted as FAT32.
The manager is an administrator on the temporary server.
第22题:
Allow zone transfers to any DNS server.
Create a new stub zone for the DNS zone on the DNS server.
Configure the DNS server to forward all unanswered queries to a DNS server located at the ISP.
Add the DNS server located at the ISP to the list of name servers for the fourthcoffee.com DNS zone.
第23题:
From the Routing and Remote Access snap-in on Server2, enable IP Routing.
From the Routing and Remote Access snap-in on Server2, enable Link Control Protocol (LCP) extensions.
From Utility Manager on Server1, enable the Start automatically when I log on option.
In the local security policy on Server2, configure the Network Access: Shares that can be accessed anonymously setting.
第24题:
Configure the company remote access server to accept multilink connections.
Configure the TCP/IP program for the dial up connection to disable IP header compression.
Configure the TCP/IP properties for the dial up connection to use the default gateway on theremote network.
Grant your user account dial in permission on the company remote access server.