单选题An administrator has replaced a faulty drive in a server using software RAID. The drive needs to now be partitioned before being added back to the array. Which of the following tools should the administrator use to accomplish this？（）A chkdskB mountC fs

第1题：

After performing the initial steps in installing the server OS from a DVD-ROM， the server reboots and goes back into the setup wizard. Which of the following is the MOST likely cause for this problem？（）

• A、The DVD-ROM drive has failed.
• B、An installation file copied from the DVD to the hard drive is corrupt.
• C、Faulty OS installation DVD
• D、Incorrect boot sequence in the BIOS

第2题：

A server has lost communication to its drives located on a fiber channel SAN.An administrator notices that the indicator lights on both the HBA and the SAN switch are not lit.Which of the following are the MOST likely causes of the problem？（）

• A、Failed HBA
• B、Failed switch port
• C、Faulty fiber cable
• D、Faulty driver
• E、Failed hard drives
• F、Faulty configuration

第3题：

A server has had a drive fail in its storage RAID set.  The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive.  Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive？（）

• A、Net use
• B、Array management
• C、Fdisk
• D、Disk Management Plug-in

第4题：

A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）

• A、Storage driver not loaded
• B、Fragmented hard drive
• C、Damaged or faulty NIC chipset
• D、Damaged or faulty system board
• E、Memory incompatible with the processor
• F、Missing voltage regulator

第5题：

An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）

• A、Move the page file to the new drive.
• B、Copy the system32 directory to the new drive.
• C、Convert the C drive to a basic disk.
• D、Setup a software RAID to mirror the C drive.

第6题：

A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）

• A、The power supply has failed.
• B、The drive cable is connected backwards.
• C、The floppy drive has failed.
• D、The proper drivers have not been loaded.

第7题：

A SAN attached production file server is required to be backed up nightly according to company  policy.Recently the data to be backed up has increased to approximately 4TB. Currently， the server has a single attached LTO2 tape drive.  Which of the following should the server administrator do to provide enough backup capacity for the nightly job？ （）

• A、 Replace the backup software with a more efficient application.
• B、 Reduce the amount of data to be backed up.
• C、 Replace the LTO2 tape drive with an LTO3 tape drive.
• D、 Replace the single tape drive with a tape library.

第8题：

An administrator has replaced a faulty drive in a server using software RAID. The drive needs to now be partitioned before being added back to the array. Which of the following tools should the administrator use to accomplish this？（）

• A、chkdsk
• B、mount
• C、fsck
• D、diskpart

第9题：

A system administrator has determined a root mirrored disk， hdisk1， needs to be replaced. The root volume has been unmirrored. What is the next step to remove the disk drive？（）

• A、cfgmgr
• B、rmdev -d hdisk1 -l
• C、reducevg rootvg hdisk1
• D、have the IBM CE replace the disk

第10题：

第11题：

第12题：

第13题：

A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive.  Which of the following is the MOST likely cause of the failures？（）

• A、 The backplane has failed and needs to be replaced.
• B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.
• C、 There is a conflict with the optical drive on the server.
• D、 The server power supply is failing and not providing enough power for all the drives.

第14题：

An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）

• A、SATA to SCSI
• B、SATA to HBA
• C、SATA to USB
• D、SATA to SAS

第15题：

A technician has had several support requests for one PC. The technician has reseated the PCIcards and replaced the hard drive in the PC located in a school cafeteria kitchen. PCs located in the business office or the classrooms have not had this issue. Which of the following is MOST likely causing this PC’s issue?（）

• A、Faulty RAM
• B、240 volt Kitchen outlets
• C、Power Brownouts
• D、Excessive Heat

第16题：

An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

• A、 SCSI cable
• B、 SCSI interface adapter on the tape library
• C、 SCSI termination card on the server
• D、 iSCSI cable

第17题：

An administrator is configuring RAID 1 in a server.  The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter.  How should the administrator BEST configure these drives？（）

• A、Install one drive on the first channel and install the second drive on the second channel.
• B、Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.
• C、Install both drives on the same channel. Cable both drives as the primary master on the samecable.
• D、Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.

第18题：

An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）

• A、The BIOS is set with the wrong boot order.
• B、The jumpers have not been set on the hard drive.
• C、The hard drive is not compatible with the system board.
• D、The boot.ini file needs to be modified.

第19题：

An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）

• A、Processor failure
• B、Third party memory
• C、Disk drive failure
• D、ESD during the upgrade
• E、Backplane failure

第20题：

Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?（）

• A、Allocate the CD to the VIO Server and NFS export the CD to the user LPARs
• B、Allocate the CD to one of the user LPARs and config the VIO Server to NFS import it
• C、Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI device
• D、Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs

第21题：

第22题：

第23题：

第24题：