单选题A computer is able to ping other devices on the same network but is unable to ping devices onanother network. Which of the following needs to be configured?（）A DNS primary serverB Host routeC Proxy ARPD Default gateway

题目
单选题
A computer is able to ping other devices on the same network but is unable to ping devices onanother network. Which of the following needs to be configured?（）
A

DNS primary server

B

Host route

C

Proxy ARP

D

Default gateway

相似考题

1.Which of the following command line tools can be used to display the default gateway, IP address,and DNS servers currently being used by a host?()A.TRACERTB.IPCONFIG/ALLC.NSLOOKUPD.PING-T

2.A computer is able to ping other devices on the same network but is unable to ping devices onanother network. Which of the following needs to be configured?()A. DNS primary serverB. Host routeC. Proxy ARPD. Default gateway

3.Which of the following network devices should be installed at a data center to intelligently distribute client connections to a pool of servers?()A. A proxy serverB. A load balancerC. A layer two switchD. A multilayer switch

4.Which of the following devices would need to be configured to block specific ports and protocols from entering the network?()A. BridgeB. FirewallC. Port replicatorD. Gateway

更多“单选题A computer is able to ping other devices on the same network but is unable to ping devices onanother network. Which of the following needs to be configured?（）A DNS primary serverB Host routeC Proxy ARPD Default gateway”相关问题

  • 第1题：

    A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）

    A. The default gateway is configured on a different subnet form this host.

    B. The host is a member of the fifth usable subnet of the 192.168.16.0 network.

    C. The subnetwork address for this host is 192.168.16.160/28.

    D. The address of the next higher subnet is 192.168.16.192.

    E. The address of the router interface that is attached to this subnetwork is 192.168.16.190.

    F. There are 60 usable host addresses on this subnet.


    参考答案：B, D, E

  • 第2题：

    A computer is able to ping other devices on the same network but is unable to ping devices onanother network. Which of the following needs to be configured?（）

    • A、DNS primary server
    • B、Host route
    • C、Proxy ARP
    • D、Default gateway

    正确答案:D

  • 第3题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第4题：

    A customer reports they are unable to connect to any computers outside of the office and they are unable to connect to the Internet. When the technician runs ipconfig, the customer gets the following output: IP address169.254.2.4 Subnet Mask.255.255.0.0 Default Gateway. Which of the following could be causing the issue?（）

    • A、The subnet mask is not correctly configured.
    • B、The DNS client has not been configured on the computer.
    • C、The DHCP client is unable to obtain an IP address from the DHCP server.
    • D、The default gateway is not specified

    正确答案:C

  • 第5题：

    Which of the following command line tools can be used to display the default gateway, IP address,and DNS servers currently being used by a host?（）

    • A、TRACERT
    • B、IPCONFIG/ALL
    • C、NSLOOKUP
    • D、PING-T

    正确答案:B

  • 第6题：

    A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the problem？（）

    • A、Faulty cable on the workstation
    • B、Wrong host name on the workstation
    • C、Wrong WINS on the workstation
    • D、Incorrect IP address assigned to the workstation

    正确答案:B

  • 第7题：

    When an ICMP redirect is received from a host that is not the current gateway for the route it is redirecting， which of the following options is the most appropriate to conclude？（）

    • A、The redirect will be ignored
    • B、The routing table will be altered
    • C、The ping will fail， followed by other network services.
    • D、The host， which sent the ICMP redirect， will begin acting as the gateway

    正确答案:B

  • 第8题：

    单选题
    When an ICMP redirect is received from a host that is not the current gateway for the route it is redirecting， which of the following options is the most appropriate to conclude？（）
    A

    The redirect will be ignored

    B

    The routing table will be altered

    C

    The ping will fail， followed by other network services.

    D

    The host， which sent the ICMP redirect， will begin acting as the gateway


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A technician needs to troubleshoot connectivity between two devices located on the same network. Which of the following BEST describes the type of protocol being used?（）
    A

    IGP

    B

    EIGRP

    C

    EGP

    D

    BGP


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the problem？（）
    A

    Faulty cable on the workstation

    B

    Wrong host name on the workstation

    C

    Wrong WINS on the workstation

    D

    Incorrect IP address assigned to the workstation


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A technician needs to troubleshoot connectivity between two devices located on the same network. Which of the following BEST describes the type of protocol being used?（）
    A

    IGP

    B

    EIGRP

    C

    EGP

    D

    BGP


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Network topology exhibit: You are the administrator at ExamSheet.net.  You use TCP/IP as the only protocol on your network. The network is configured as in the network topology exhibit. All existing computers and devices use 255.255.240.0 as the subnet mask. You install Windows 2000 Professional on a computer named ExamSheet2. You configure ExamSheet2 to have a TCP/IP address of 10.10.20.234, a default gateway of 10.10.20.1, a subnet mask of 255.255.0.0 and a WINS server address of 10.10.13.10. You cannot connect to  shared resources on ExamSheetB by using its UNC name. You want ExamSheet2 to be able to connect to ExamSheetB. What should you do? （）
    A

    Install a WINS server on the same segment as Company2

    B

    Install and configure a DNS server and configure Company2 to use the DNS Server service.

    C

    Configure Company2 with a default gateway address 10.10.13.1.

    D

    Configure Company2 with a default gateway address of 10.10.30.1.

    E

    Configure Company2 with a TCP/IP address of 10.10.20.234.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    A. The switch name must match the workgroup name of the local network.

    B. The switch must be configured with an IP address and default gateway.

    C. The remote workstations must have access to the management VLAN of the switch.

    D. CDP must be enabled on the switch so that it can be located by other devices on the network.


    参考答案：B, C

  • 第14题：

    Which of the following options applies to virtual Ethernet devices（）

    • A、A virtual Ethernet adapter can only connect to other partitions within the same system.
    • B、A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.
    • C、A partition can support an unlimited number of virtual Ethernet devices.
    • D、A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the "trunk flag" set

    正确答案:A

  • 第15题：

    Session affinity is a feature of which of the following devices?（）

    • A、DNS server
    • B、DHCP server
    • C、Load balancer
    • D、IPS

    正确答案:C

  • 第16题：

    Which of the following network devices should be installed at a data center to intelligently distribute client connections to a pool of servers?（）

    • A、A proxy server
    • B、A load balancer
    • C、A layer two switch
    • D、A multilayer switch

    正确答案:B

  • 第17题：

    Which of the following devices would need to be configured to block specific ports and protocols from entering the network?（）

    • A、Bridge
    • B、Firewall
    • C、Port replicator
    • D、Gateway

    正确答案:B

  • 第18题：

    Which of the following commands would MOST likely be used to see where a loss of connectivity between two devices on a network is located?（）

    • A、tracert
    • B、netstat
    • C、nslookup
    • D、ping

    正确答案:A

  • 第19题：

    Network topology exhibit: You are the administrator at ExamSheet.net.  You use TCP/IP as the only protocol on your network. The network is configured as in the network topology exhibit. All existing computers and devices use 255.255.240.0 as the subnet mask. You install Windows 2000 Professional on a computer named ExamSheet2. You configure ExamSheet2 to have a TCP/IP address of 10.10.20.234, a default gateway of 10.10.20.1, a subnet mask of 255.255.0.0 and a WINS server address of 10.10.13.10. You cannot connect to  shared resources on ExamSheetB by using its UNC name. You want ExamSheet2 to be able to connect to ExamSheetB. What should you do? （）

    • A、Install a WINS server on the same segment as Company2
    • B、Install and configure a DNS server and configure Company2 to use the DNS Server service.
    • C、Configure Company2 with a default gateway address 10.10.13.1.
    • D、Configure Company2 with a default gateway address of 10.10.30.1.
    • E、Configure Company2 with a TCP/IP address of 10.10.20.234.

    正确答案:E

  • 第20题：

    单选题
    In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?（）
    A

    Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.

    B

    A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.

    C

    A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.

    D

    A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    A customer reports they are unable to connect to any computers outside of the office and they are unable to connect to the Internet. When the technician runs ipconfig, the customer gets the following output: IP address169.254.2.4 Subnet Mask.255.255.0.0 Default Gateway. Which of the following could be causing the issue?（）
    A

    The subnet mask is not correctly configured.

    B

    The DNS client has not been configured on the computer.

    C

    The DHCP client is unable to obtain an IP address from the DHCP server.

    D

    The default gateway is not specified


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Which of the following options applies to virtual Ethernet devices（）
    A

    A virtual Ethernet adapter can only connect to other partitions within the same system.

    B

    A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.

    C

    A partition can support an unlimited number of virtual Ethernet devices.

    D

    A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the trunk flag set


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A computer is able to ping other devices on the same network but is unable to ping devices onanother network. Which of the following needs to be configured?（）
    A

    DNS primary server

    B

    Host route

    C

    Proxy ARP

    D

    Default gateway


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following network topologies is MOST likely to affect other devices on the network if there is a problem with one of the devices? （）
    A

    Mesh

    B

    Bus

    C

    Ring

    D

    Star


    正确答案： B
    解析： 暂无解析

相关内容