in all cases
for some non PnP(non plug and play) device drivers and all PnP(plug and play) device drivers
for all non PnP(non plug and play) device drivers and most PnP(plug and play) device drivers
not for any non PnP(non plug and play)device drivers,only for all PnP(plug and play) device drivers
第1题:
什么是微软宣称的即插即用PnP(Plug-and-Play)技术?
第2题:
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?()
第3题:
Which of the following is the purpose of the sigverif.exe utility?()
第4题:
A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?()
第5题:
You are the network administrator for ExamSheet.net. You administer ExamSheet’s Windows 2000 network. You install Windows 2000 Professional on a computer that has a Non-Plug and Play video adapter. You want to configure the video adapter to use 32-bit color and 1024 x 768 resolution. The color setting for the video adapter is set to 16 colors and 640 x 480 resolutionand you cannot change either setting. You view display properties and confirm that the appropriate monitor is selected. You want to be able to change the color setting for this video adapter. What should you do? ()
第6题:
You are the administrator of Company's network. You wish to connect your Windows 2000 Professional computer to a new TCP/IP based Plug and Play compliant print device. The print device is included on the current Hardware Compatibility List (HCL) When you attempt to create a new TCP/IP printer port, you receive the following message: "Specified Port cannot be added. The port already exists." You want to create a new TCP/IP printer port. What should you do? ()
第7题:
The driver CD is for Windows XP only.
The technician needs to initialize the NIC first within Device Manager before installing a driver.
The driver on the CD is not digitally signed.
The driver is corrupt.
第8题:
Check the backplane cabling.
Check the server BIOS.
Update the RAID controller firmware.
Install the latest hard drive firmware
第9题:
Connect to Windows Update and install all driver updates.
From the properties of the device, select Roll Back Driver.
From Device Manager, uninstall the device and then restart the server.
From Device Manager, disable the device and then click Scan for hardware changes.
第10题:
plug in and turn on the computer; let Windows recognize the new hardware and install the driver.
plug in the computer; let Windows recognize the new hardware and plug in the speakers.
let Windows recognize the new hardware; install the driver and plug in the speakers.
turn on and plug in the computer; let Windows recognize the new hardware and install the driver.
第11题:
Use the Device Manager to enable the USB manager root hub.
Use the Device Manager to enable the USB host controller in the current hardware profile.
Contact the hardware manufacturer to obtain the upgrade for the Plug and Play BIOS.
Turn off the computer plug in the ISDN terminal host adapter and restart the computer.
第12题:
Check the backplane cabling.
Check the server BIOS.
Update the RAID controller firmware.
Install the latest hard drive firmware.
第13题:
A technician plugs a USB device into the front panel of a desktop computer and nothing happens.The technician knows that plug-n-play is enabled. Which of the following BEST describes a possible cause to this issue?()
第14题:
One user has a Video Capture Card installed on her pc. She uses it to capture video pictures. She complains the video capture card is not working properly and she couldn't view captured video. You check out the Device manager, which does not indicate any Video devices installed on your system, but you see a yellow mark placed besides the audio device. What should you do in order to make the video capture device work? ()
第15题:
When installing a new Plug and Play sound card, a technician should turn off and unplug the computer; remove the computer’s cover; locate the sound card slot, insert and secure the card in the slot and:()
第16题:
In which situation(s) will Windows XP advise the technician installing a device that the driver is signed or not?()
第17题:
You purchase a USB board, ISDN terminal adapter for your Windows 2000 Professional portable computer. You plug the device in to the USB port. Plug and Play fails to detect the new device. You test the device on a Windows 2000 Professional desktop computer. You find that plug and play correctly detects the device. You want to resolve the problem so that you can use ISDN terminal adapter on your portable computer. What should you do?()
第18题:
The technician plugged a USB 2.0 device into a USB 1.1 port.
The technician needs to reboot the computer for the device to work.
The technician plugged a USB 1.1 device into a USB 2.0 port.
The front panel connectors are not plugged into the motherboard.
第19题:
Encrypt a file for secured electronic delivery.
Confirm the digital certificate to check file integrity.
Remove non-certified drivers from the driver cache.
Choose the level of driver certification to use when installing device drivers.
第20题:
in all cases
for some non PnP(non plug and play) device drivers and all PnP(plug and play) device drivers
for all non PnP(non plug and play) device drivers and most PnP(plug and play) device drivers
not for any non PnP(non plug and play)device drivers,only for all PnP(plug and play) device drivers
第21题:
第22题:
Change the LPT port setting to enable legacy Plug and Play detection on your computer.
Delete the existing printer port.
Change the LPT port setting to bidirectional in the BIOS on your computer.
Obtain and install the WDM-compliant device drivers and printing software for the printer.
第23题:
Enable the device in Device manager
Install new driver from Device Manager
Disable PNP and install manually
Copy the manufacturer's driver to WINNT/driver cache/i386/ and then let Windows 2000 to install the device.
第24题:
UseList All Modesto select the adapter default mode.
Change the adapter refresh rate to 60Mhz.
Upgrade the monitor drivers.
Upgrade the display adapters drivers