boot -s
boot -r
boot single
boot recovery
第1题:
You are the network administrator at TestKing. You need to perform password recovery on Router TK1. What must you modify in the password recovery process?()
第2题:
Which of the following is needed to boot into the Recovery Console in Windows XP?()
第3题:
Which two commands are used during the password recovery process?()
第4题:
After applying a new driver to a NIC, the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem?()
第5题:
During reboot the system hangs with an LED 0554 message that means, "The boot device could not be opened or a read failed." What recovery procedures should be taken?()
第6题:
What are three correct steps to reset a lost root password?()
第7题:
During reboot the system hangs with LED 0581 that indicates "Configuring TCP/IP." Which recovery procedures should be taken?()
第8题:
Emergency Restore Disk
System Restore point
Original Installation CD
Automated System Recovery
第9题:
Boot in maintenance mode and use fsck to check hd5.
Boot in maintenance mode, access the rootvg and check the /etc/inittab for corruption.
Boot in maintenance mode, access the rootvg and rebuild the boot image using the bosboot command.
Boot in maintenance mode, and reset the root password.
第10题:
show system boot-messages
show chassis messages
show file system boot-messages
show boot-log messages
第11题:
Boot using recovery console and restore the previous driver.
Boot the server, press F8 and access last known good configuration.
Restore the server using last backup tape.
Boot the server with ASR option.
第12题:
Reset the root password.
Press the space bar.
Type recovery.
Press the Enter key.
第13题:
When resetting a Catalyst Express switch to factory default settings, which three options are available from the Software Recovery window?()
第14题:
When performing password recovery, which command should be entered at the boot prompt?()
第15题:
Which of the following is the BEST solution for repairing a hard drive that results in the Could not readfrom selected boot disk display upon booting? ()
第16题:
A user reports a corrupted boot logical volume. In order to recreate the contents of the boot logical volume which of the following procedures should the user be advised to perform?()
第17题:
During reboot, the system hangs with an LED 0554 message that means, "The boot device could not be opened or a read failed." Which of the following recovery procedures should be taken ()
第18题:
Which command do you use to display the messages seen during the last system boot?()
第19题:
Use recovery console and the bootcfg /rebuild command.
Use recovery console and the chkdsk command.
Use recovery console and the fixboot command.
Use recovery console and the fixmbr command.
第20题:
Boot to a password recovery window
Boot with the factory default image
Erase the system configuration and boot with the factory default IOS image
Erase the system configuration and boot from a TFTP-supplied IOS image
Erase the System Configuration
第21题:
Boot in maintenance and use fsck to check hd5.
Boot in maintenance mode, access the rootvg and check the /etc/inittab for corruption.
Boot in maintenance mode, access the rootvg and rebuild the boot image using the bosboot command.
Boot in maintenance mode, access the rootvg and use the bootlist command to create a valid boot list.
第22题:
Press the TAB key when prompted.
Enter boot -p.
Enter recovery when prompted.
Commit the change.
Reboot.
第23题:
Reboot the system in normal mode.
Use the bosboot command to rebuild the boot image.
Restore the boot logical volume from a mksysb image.
Reboot the system into maintenance mode and run fsck on the boot logical volume.