单选题When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?()A ping atm vci 0.100 interface at-0/1/0 end-to-endB ping atm vci 0.100 interface at-0/1/0 circuitC ping atm vci 0.100 interface at

题目
单选题
When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?()
A

ping atm vci 0.100 interface at-0/1/0 end-to-end

B

ping atm vci 0.100 interface at-0/1/0 circuit

C

ping atm vci 0.100 interface at-0/1/0 far-end

D

ping atm vci 0.100 interface at-0/1/0 final-hop


相似考题
更多“单选题When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?()A ping atm vci 0.100 interface at-0/1/0 end-to-endB ping atm vci 0.100 interface at-0/1/0 circuitC ping atm vci 0.100 interface at”相关问题
  • 第1题:

    When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?()

    A.ping atm vci 0.100 interface at-0/1/0 end-to-end

    B.ping atm vci 0.100 interface at-0/1/0 circuit

    C.ping atm vci 0.100 interface at-0/1/0 far-end

    D.ping atm vci 0.100 interface at-0/1/0 final-hop


    参考答案:A

  • 第2题:

    在ATM物理层信元中,空闲信元的信头值是()

    A.VPI=0,VCI=0

    B.VPI=1,VCI=0

    C.VPI=0,VCI=1

    D.VPI=1,VCI=1


    参考答案:A

  • 第3题:

    Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured. Which combinations accurately describe the interface under which a feature will be configured?()

    • A、PPP on the ATM interface
    • B、VPI/VCI on the dialer interface
    • C、IP address on the ATM interface
    • D、CHAP on the dialer interface

    正确答案:D

  • 第4题:

    With the CLI command profile atm 1483 bulk-config-name test atm-pppoe,which three statements describe its purpose and implementation?()

    • A、Profile atm 1483 must be applied to the atm major interface.
    • B、The bulk-config-name used is test atm-pppoe.
    • C、The bulk-config-name used is test.
    • D、Atm-pppoe is the atm base profile.
    • E、Atm-pppoe is the atm level interface description.

    正确答案:A,C,D

  • 第5题:

    在ATM物理层信元中,空闲信元的信头值是()

    • A、VPI=0,VCI=0
    • B、VPI=1,VCI=0
    • C、VPI=0,VCI=1
    • D、VPI=1,VCI=1

    正确答案:A

  • 第6题:

    In a Bridged 1483 network, which set of commands represent an operationally correct configuration for an ATM subinterface?()

    • A、interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip unnumbered loopback0
    • B、interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip unnumbered loopback0
    • C、interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip address unnumbered loopback0
    • D、interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip address 0.0.0.0 255.255.255.255

    正确答案:B

  • 第7题:

    You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which two achieve this result?()

    • A、set protocols   setospf area 0   set interface so-0/0/0.100
    • B、set protocols ospf area 0 interface so-0/0/0.100
    • C、edit protocols ospf interface so-0/0/0.100
    • D、edit protocols ospf area 0   set interface so-0/0/0.100

    正确答案:B,D

  • 第8题:

    In a Bridged 1483 network, which CLI commands are used to baseline an IP interface on ATM 6/1.1 and display recent IP transmit and receive statistics?()

    • A、clear ip interface atm 6/1.1 show ip interface atm 6/1.1
    • B、baseline atm interface atm 6/1.1 show ip interface atm 6/1.1
    • C、clear ip interface atm 6/1.1 show ip interface atm 6/1.1 delta
    • D、baseline atm interface atm 6/1.1 show ip interface atm 6/1.1 delta

    正确答案:D

  • 第9题:

    单选题
    In a Bridged 1483 network, which CLI commands are used to baseline an IP interface on ATM 6/1.1 and display recent IP transmit and receive statistics?()
    A

    clear ip interface atm 6/1.1 show ip interface atm 6/1.1

    B

    baseline atm interface atm 6/1.1 show ip interface atm 6/1.1

    C

    clear ip interface atm 6/1.1 show ip interface atm 6/1.1 delta

    D

    baseline atm interface atm 6/1.1 show ip interface atm 6/1.1 delta


    正确答案: B
    解析: 暂无解析

  • 第10题:

    多选题
    With the CLI command profile atm 1483 bulk-config-name test atm-pppoe,which three statements describe its purpose and implementation?()
    A

    Profile atm 1483 must be applied to the atm major interface.

    B

    The bulk-config-name used is test atm-pppoe.

    C

    The bulk-config-name used is test.

    D

    Atm-pppoe is the atm base profile.

    E

    Atm-pppoe is the atm level interface description.


    正确答案: D,A
    解析: 暂无解析

  • 第11题:

    多选题
    What are three common reasons for ATM CRC errors?()
    A

    Incorrect VPI and VCI configuration

    B

    Noise, gain hits, or other transmission problems on the data link equipment

    C

    ATM cells are dropped due to incorrect ATM routing in the service provider.

    D

    A faulty or failing ATM interface.

    E

    Cells are dropped due to traffic policing in the ATM cloud on one or more virtual circuits attached to theATM interface


    正确答案: A,D
    解析: 暂无解析

  • 第12题:

    单选题
    In a Bridged 1483 network, you suspect ATM interface 6/2.1 is receiving cells but may not be transmitting them. The interface has an ATM PVC configuration of atm pvc 33 0 33 aal5snap . How do you baseline this interface and display recent ATM cell statistics?()
    A

    baseline atm vc atm 6/2 1 show atm vc atm 6/2 1 delta

    B

    baseline atm vc atm 6/2 33 show atm vc atm 6/2 33 delta

    C

    baseline interface atm 6/2 1 show atm vc atm 6/2 1 delta

    D

    baseline interface atm 6/2 33 show atm vc atm 6/2 33 delta


    正确答案: B
    解析: 暂无解析

  • 第13题:

    Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?()

    A. PPP on the ATM interface

    B. VPI/VCI on the dialer interface

    C. IP address on the ATM interface

    D. CHAP on the dialer interface


    参考答案:D

  • 第14题:

    What are three common reasons for ATM CRC errors?()

    • A、Incorrect VPI and VCI configuration
    • B、Noise, gain hits, or other transmission problems on the data link equipment
    • C、ATM cells are dropped due to incorrect ATM routing in the service provider.
    • D、A faulty or failing ATM interface.
    • E、Cells are dropped due to traffic policing in the ATM cloud on one or more virtual circuits attached to theATM interface

    正确答案:B,D,E

  • 第15题:

    You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100. Which two achieve this result?()

    • A、set protocols   set ospf area 0   set interface so-0/0/0.100
    • B、set protocols ospf area 0 interface so-0/0/0.100
    • C、edit protocols ospf interface so-0/0/0.100
    • D、edit protocols ospf area 0   set interface so-0/0/0.100

    正确答案:B,D

  • 第16题:

    When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?()

    • A、ping atm vci 0.100 interface at-0/1/0 end-to-end
    • B、ping atm vci 0.100 interface at-0/1/0 circuit
    • C、ping atm vci 0.100 interface at-0/1/0 far-end
    • D、ping atm vci 0.100 interface at-0/1/0 final-hop

    正确答案:A

  • 第17题:

    You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command. Which statement is correct?()

    • A、The bypass-routing parameter is used to test the density on the T1 line.
    • B、The bypass-routing parameter cannot be used on a T1 interface.
    • C、The bypass-routing parameter allows you to ping a host through an interface that has no route through it.
    • D、The bypass-routing parameter allows you to ping a local WAN interface without generating any outbound traffic.

    正确答案:C

  • 第18题:

    You would like to operate IS-IS on interface atm 6/0.33 with an IP address of 192.168.1.1/24. Which set of commands accomplishes this?()

    • A、router isis network 192.168.1.0 0.0.0.255
    • B、router isis network 192.168.1.0 255.255.255.0
    • C、interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 router isis
    • D、interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 ip router isis

    正确答案:D

  • 第19题:

    Which set of commands correctly builds a PPP over Ethernet connection on a DSL connection?()

    • A、interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation ppp ppp authentication chap ip unnumbered loopback 1
    • B、interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation pppoe interface pppoe 5/1.1 encapsulation ppp ppp authentication chap ip unnumbered loopback 1
    • C、interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation pppoe interface atm 5/1.1.1 encap ppp ppp authentication chap ip unnumbered loopback 1
    • D、interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation pppoe ppp authentication chap ip unnumbered loopback 1

    正确答案:C

  • 第20题:

    In a Bridged 1483 network, which set of commands is used to configure an ATM sub-interface?()

    • A、interface atm 6/0.33 atm pvc 33 0 33 aal5snap ip description Company-XYZ encapsulation bridge1483 ip address unnumbered loopback0
    • B、interface atm 6/0.33 atm pvc 33 0 33 aal5snap ip description Company-XYZ encapsulation bridge1483 ip unnumbered loopback0
    • C、interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip description Company-XYZ ip address unnumbered loopback0
    • D、interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip description Company-XYZ ip unnumbered loopback0

    正确答案:D

  • 第21题:

    单选题
    Which set of commands correctly builds a PPP over Ethernet connection on a DSL connection?()
    A

    interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation ppp ppp authentication chap ip unnumbered loopback 1

    B

    interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation pppoe interface pppoe 5/1.1 encapsulation ppp ppp authentication chap ip unnumbered loopback 1

    C

    interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation pppoe interface atm 5/1.1.1 encap ppp ppp authentication chap ip unnumbered loopback 1

    D

    interface atm 5/1.1 atm pvc 1 0 101 aal5snap encapsulation pppoe ppp authentication chap ip unnumbered loopback 1


    正确答案: C
    解析: 暂无解析

  • 第22题:

    单选题
    在ATM物理层信元中,空闲信元的信头值是()。
    A

    VPI=0,VCI=0

    B

    VPI=1,VCI=0

    C

    VPI=0,VCI=1

    D

    VPI=1,VCI=1


    正确答案: C
    解析: 暂无解析

  • 第23题:

    单选题
    Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured. Which combinations accurately describe the interface under which a feature will be configured?()
    A

    PPP on the ATM interface

    B

    VPI/VCI on the dialer interface

    C

    IP address on the ATM interface

    D

    CHAP on the dialer interface


    正确答案: C
    解析: 暂无解析