router’s version and serial number to help open a case with JTAC
software documentation describing features and configuration tasks within JUNOS
a brief description of commands and their default values
a verification of the current configuration on the router
第1题:
Part of the configuration files for routers testking1 and testking2 are displayed below:If you were to enter the "show interface serial 0" command on router testking1,which of the following will be displayed?()
A. Serial 0 is down, line protocol is down
B. Serial 0 is up, line protocol is up
C. Open: IPCP, CDPCP
D. LCP closed
E. LCP open
第2题:
A. the amount of available ROM
B. the amount of available flash and RAM memory
C. the version of the bootstrap software present on the router
D. show version
E. show processes
F. show running-config
第3题:
A technician at TestKing needs to update the network documentation. One of the tasks includes documenting the name of the IOS image file of each router in the network.Which commands could be used to find this information?()
第4题:
With a VPN Accelerator Module 2+ (VAM2+) installed in a Cisco 7200 series router, what will be the resulting action when entering the command no crypto engine accelerator slot number?()
第5题:
Which command returns a list of commands in which a given keyword is used throughout the Junos hierarchies?()
第6题:
Nexus# conf t Enter configuration commands, one per line. End with CNTL/Z. Nexus(config)# interface Loopback10 % Permission denied Nexus(config)# ? no Negate a command or set its defaults username Configure user information. end Go to exec mode exit Exit from command interpreter What is the reason why this user is not able to enter configuration commands?()
第7题:
What information does the help reference command provide?()
第8题:
the amount of available ROM
the amount of available flash and RAM memory
the version of the bootstrap software present on the router
show version
show processes
show running-config
第9题:
show configuration
show environment
show inventory
show platform
show version
第10题:
UniDirectional Link Detection
Hot Standby Router Protocol
Virtual Router Redundancy Protocol
PortFast
root guard
loop guard
第11题:
show startup-config and 0x2142
show version and 0x2102
show flash and 0x2102
show version and 0x2142
show running-config and 0x2142
show flash and 0x2142
第12题:
scanning
skimming
inferring
read in depth
第13题:
A CCNA candidate is working on a 2600 Cisco router. The person needs to verify that the configuration register is set to boot the router IOS from flash memory and use the commands saved in the startup-configuration file.Which command will display this information, and what is the configuration register value that should be displayed?()
A. show startup-config and 0x2142
B. show version and 0x2102
C. show flash and 0x2102
D. show version and 0x2142
E. show running-config and 0x2142
F. show flash and 0x2142
第14题:
第15题:
What is a global command?()
第16题:
What information does the help topic command provide?()
第17题:
Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command should be used to gather this information?()
第18题:
What two features in Cisco switches help prevent Layer 2 loops?()
第19题:
A command that is available in every release of IOS, regardless of the version or deployment status.
A command that can be entered in any configuration mode.
A command that is universal in application and supports all protocols.
A command that is implemented in all foreign and domestic IOS version.
A command that is set once and affects the entire router.
第20题:
disables OIR on the VAM2+ module
removes the VAM2+ crypto engine feature and disables the associated configuration commands from the router
disables dual VAM2+ hardware stateful failover capabilities
disables the crypto engine hardware acceleration, resulting in all crypto functions to be performed in software
第21题:
a brief description of commands and their default values
the serial number and version number of the device used to open a support case with JTAC
a list of all the active hardware alarms on the device
a display of the current configuration while in operational mode
第22题:
Configure the net system - id command under routerisis and enable IS - IS on each interface with the ip router isis command.
Configure the net sy stem - id and the network net - id commands under routerisis.
Configure the network net - id command(s) under routerisis and enable IS - IS on each interface with the ip router isis command.
Configure the network net - id command(s) and the is - type level -1- 2 command under routerisis.
Configure the net system - id and the network net - id commands under routerisis and enable ISIS on each interface with the ip router isis command.
第23题:
ITSO Redbooks
Facts and Features
System Planning Tool
Fix Level Recommendation Tool