set snmp trap-group my-trap-group targets 172.16.17.1
set snmp targets 172.16.17.1
set snmp trap-group my-trap-group link-status
set snmp trap-group my-trap-group categories link
第1题:
You have been asked to configure a login class which will permit its users to view and edit the configuration. The class should only allow the configuration of the interfaces and firewall heirarchies. Which configuration correctly accomplishes this?()
A.A
B.B
C.C
D.D
第2题:
You‘re working at TestKing as a network administrator when your MCSE assistant calls you for help. He has attempted to configure Router TK1 and incorrectly configured the router interface with a subnet broadcast address. You have to correct this by first removing the incorrect IP address and then re-entering the first usable IP address of the same subnet.How will you do this?()
A.
B.
C.
D.
E.
第3题:
You are the network administrator of a small Layer 2 network with 50 users. Lately, users have been complaining that the network is very slow. While troubleshooting, you notice that the CAM table of your switch is full, although it supports up to 12,000 MAC addresses. How can you solve this issue and prevent it from happening in the future?()
第4题:
Which three route filtering statements are true?()
第5题:
You have a Hub Transport server named Server1 that runs Exchange Server 2010.All Exchange users use IMAP4 to retrieve e-mail.You need to ensure that all users can send e-mail by using SMTP.Your solution must not require any modifications to the default connectors. What should you do?()
第6题:
You have an Exchange Server 2010 Edge Transport server named Server1.You create a spam quarantine mailbox on a Mailbox server.You need to configure Server1 to send spam e-mail messages to the quarantine mailbox.Which properties should you configure?()
第7题:
As a junior network administrator of your company, you have been asked to move the printer spool off the system partition and onto another hard disk to solve disk space issues. How will you move the printer spool to another drive?()
第8题:
Create and configure a Send connector.Create and configure a Receive connector.Create and configure an Accepted domain.
Create an Edge Subscription file. Create and configure a Send connector.Create and configure a Receive connector.
Create an Edge Subscription file. Create and configure a Send connector.Create and configure an Accepted domain.
Create and configure a Send connector.Create and configure an Accepted domain.install the Exchange Server 2010 schema extensions.
第9题:
第10题:
TFTP
FTP
SCP
SFTP
第11题:
shouldn’tfollow
mustn’tfollow
couldn’t have been following
shouldn’t have been following
第12题:
Configure IMAP4 clients to send e-mail by using TCP port 25.
Configure IMAP4 clients to send e-mail by using TCP port 587.
Create a new Send connector and configure the connector to use port 110.
Create a new Send connector and configure the connector to use port 143.
第13题:
A. After the router ospf 10 and passive - interface s0/0 commands have been issued , the s0/0 interface will not send any OSPF updates, but will receive routing updates on that interface
B. When you use the passive - interface command with RIPv2, multicasts are sent out the specified interface
C. After the router rip and passive -interface s0/0 commands have been issued, the s0/0 interface will not send any RIP updates, but will receive routing updates on that interface
D. When you use the passive - interface command with EIGRP, hel lo messages are not sent out the specified interface
E. After the router eigrp 10 and passive - interface s0/0 commands have been issued, the s0/0 interface will not send any EIGRP updates, but will receive routing updates on that interface
F. When you use the passive - interface command with OSPF, hello messages are not sent out the specified interface
第14题:
第15题:
You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?()
第16题:
You work as a network administrator at, You have been asked to configure 802.1x port-based authentication. You notice that the client workstation is not compatible with 802.1x port-based authentication. What supported authentication server should be chosen?()
第17题:
You are the network administrator for your company. A Windows Server 2003 computer named Router11 is used to connect the network to the Internet. You find out that some computers on the network are infected with a worm, which occasionally sends out traffic to various hosts on the Internet. This traffic always uses a certain source TCP port number.You need to identify which computers are infected with the worm. You need to configure a solution on Router11 that will perform the following two tasks: Detect and identify traffic that is sent by the worm. Immediately send a notification to a network administrator that the infected computer needs to be repaired. What should you do?()
第18题:
You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network. You need to configure the wireless connection to allow your computer to discover other computers. What should you do?()
第19题:
Database Control
Management Server
Management Repository
Application Server Control
Oracle Management Agent
第20题:
第21题:
user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1
user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1
user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1
user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1
第22题:
set snmp trap-group my-trap-group targets 172.16.17.1
set snmp targets 172.16.17.1
set snmp trap-group my-trap-group link-status
set snmp trap-group my-trap-group categories link
第23题:
resolve
indirect
next-hop
recursive
第24题: