多选题Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?（）Aset interfaces ge-0/0/0.0 address 10.1.1.1/24Bset interfaces ge-0/0/0.0 family inet address 10.1.1.1/24Cset interfaces ge-0/0/0 unit 0 family inet address

第1题：

第2题：

Which command sequence shows traffic per queue for an interface?（）

• A、show interfaces queue ge-0/0/0
• B、show statistics queue detail
• C、show interfaces ge-0/0/0 statistics extensive
• D、monitor interface ge-0/0/0 queue

第3题：

Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address andnetwork mask of 71.33.252.17/24. A webserver with IP address 10.20.20.1 isrunning an HTTP service on TCP port 8080. The webserver is attached to the ge-0/0/0.0 interface of yourdevice. You must use NAT to make the webserver reachable from the Internet using port translation.Which type of NAT must you configure？（）

• A、source NAT with address shifting
• B、pool-based source NAT
• C、static destination NAT
• D、pool-based destination NAT

第4题：

Which command sequence displays queue statistics for an interface?（）

• A、monitor interface ge-0/0/0 queue
• B、show interfaces queue ge-0/0/0
• C、show interfaces ge-0/0/0 statistics extensive
• D、show statistics queue detail

第5题：

You accidentally configured interface so-0/0/0.0 with /32 instead of /30. Which two solutions could you use to correct this configuration?（）

• A、[edit interfaces so-0/0/0.0]   user@router# replace family inetaddress /32 with /30
• B、[edit interfaces so-0/0/0.0]   user@router# rename family inetaddress /32 to address /30
• C、[edit]   user@router# replace interface so-0/0/0.0 family inetaddress /32 with address /30
• D、[edit interfaces so-0/0/0.0]   user@router# delete family inet address   user@router# set family inetaddress /30

第6题：

You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?（）

• A、set security zones management interfaces ge-0/0/0.0
• B、set zones functional-zone management interfaces ge-0/0/0.0
• C、set security zones functional-zone management interfaces ge-0/0/0.0
• D、set security zones functional-zone out-of-band interfaces ge-0/0/0.0

第7题：

Which command would initiate a loopback on a Gigabit Ethernet interface ge-0/0/0?（）

• A、# set interfaces ge-0/0/0 unit 0 loopback
• B、# set interfaces ge-0/0/0 gigether-options loopback
• C、> set interfaces ge-0/0/0 loopback
• D、> loopback ge-0/0/0

第8题：

Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 inJUNOS software?（）

• A、set interfaces ge-0/3/0 unit 0 metric 10
• B、set protocols ospf reference-bandwidth 10g
• C、set interfaces ge-0/3/0 unit 0 bandwidth 10g
• D、set protocols ospf area 0 interface ge-0/3/0 metric 10
• E、set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g

第9题：

第10题：

第11题：

第12题：

第13题：

Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 in JUNOS software？（）

• A、set interfaces ge-0/3/0 unit 0 metric 10
• B、set protocols ospf reference-bandwidth 10g
• C、set interfaces ge-0/3/0 unit bandwidth 10g
• D、set protocols ospf area 0 interface ge-0/3/0 metric 10
• E、set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g

第14题：

Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to make the HTTP service on the host reachable from the Internet. On which IP address and TCP port can Internet hosts reach the HTTP service?（）

• A、IP address 10.10.10.1 and TCP port 8080
• B、IP address 71.33.252.17 and TCP port 80
• C、IP address 71.33.251.19 and TCP port 80
• D、IP address 71.33.252.19 and TCP port 8080

第15题：

[edit groups] user@host# show node0 { system { host-name NODE0； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.1/24； } } } } } node1 { system { host-name NODE1； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.2/24； } } } } } In the exhibit， what is the function of the configuration statements？（）

• A、This section is where you define all chassis clustering configuration.
• B、This configuration is required for members of a chassis cluster to talk to each other.
• C、You can apply this configuration in the chassis cluster to make configuration easier.
• D、This section is where unique node configuration is applied.

第16题：

Which two configuration options must be present for IPv4 transit traffic to pass between the ge-0/0/0.0 andge-0/0/2.0 interfaces？（）

• A、family inet
• B、a security zone
• C、a routing instance
• D、host-inbound-traffic

第17题：

You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality？（）

• A、[edit interfaces]
• B、[edit security zones]
• C、[edit system services]
• D、[edit security interfaces]

第18题：

Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?（）

• A、set interfaces ge-0/0/0.0 address 10.1.1.1/24
• B、set interfaces ge-0/0/0.0 family inet address 10.1.1.1/24
• C、set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24
• D、set interfaces ge-0/0/0 address 10.1.1.1/24

第19题：

Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?（）

• A、set ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0
• B、set ip interface ge-0/0/0 address 192.168.1.1/24
• C、set interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0
• D、set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24

第20题：

第21题：

第22题：

第23题：

第24题：