192.168.0.0/16 only
192.168.0.0/17 only
192.168.50.0/24 and 192.168.51.0/24
192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
第1题:
A.Apply an import policy to OSPF; this will import the static routes into OSPF
B.Apply an export policy to protocol "static"; this will export the routes to other protocols.
C.Apply an import policy to the forwarding table; this will import the routes, allowing them to be forwarded to OSPF neighbors.
D.Apply an export policy to OSPF; this will export the static routes to your OSPF neighbors.
第2题:
A. 192.168.0.0/16 only
B. 192.168.0.0/17 only
C. 192.168.50.0/24 and 192.168.51.0/24
D. 192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
第3题:
A. Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network.
B. Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.
C. Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.
D. All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .
第4题:
Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?()
A. the routes originating from the RIP routing domain
B. the routes originating from the OSPF stub area
C. all OSPF inter and intra - area routes
D. all routes originating from RIP and OSPF routing domains
第5题:
A. 10.10.10.16/28 only
B. 10.10.10.16/28 and 10.10.10.64/26
C. 10.10.10.16/28, 10.10.10 .64/26, and 172.16.10.0/24
D. 10.10.10.64/26 only
第6题:
第7题:
在OSPF进程下使用redistributestatic命令重发布三条静态路由,10.10.0.0/16,192.168.0.0/24,172.16.0.0/24,OSPF会重发布什么样的路由?()
第8题:
Your routing table contains four static routes which you need to redistribute to your OSPF peers. Which method would accomplish this?()
第9题:
Apply an import policy to OSPF that injects the static routes into OSPF
Apply an import policy to the static routes that injects the static routes into OSPF
Apply an export policy to the static routes that injects the static routes into OSPF
Apply an export policy to OSPF that injects the static routes into OSPF
第10题:
The route is not advertised into BGP.A.The route is not advertised into BGP.
The route is advertised into BGP with metric 10.B.The route is advertised into BGP with metric 10.
The route is advertised into BGP with metric 20.C.The route is advertised into BGP with metric 20.
The route is advertised into BGP with default metric.D.The route is advertised into BGP with default metric.
第11题:
set protocol rip no-passive
top edit policy-options policy-statement demo set term 1 from protocol rip set term 1 then accept top set protocols rip group internal export demo
set protocols rip advertise in-out
top edit policy-options policy-statement demo set term 1 from active routes set term 1 then accept top set protocols rip group internal export demo
第12题:
Accept all OSPF routes and install them into the inet.3 routing table.
Accept all OSPF routes and install them into the inet7.0 routing table.
Accept all OSPF routes and install them into the inet4.0 routing table.
Accept all OSPF routes and install them into the inet.0 routing table.
第13题:
A.A
B.B
C.C
D.D
第14题:
Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?()
A. Network B
B. Network A and Network B
C. Network A
D. neither Network A nor Network B
第15题:
A. Only routes 10.0.1.0/24 will be sent out all interfaces.
B. Only routes matching 10.0.0.0/8 will be advertised out interfaces other than Ethernet 0.
C. Only routes matching 10.0.0.0/8 will be advertised out Ethernet 0.
D. Only routes matching 10.0.1.0/24 will be advertised out Ethernet 0.
E. Only routes 10.0.1.0/24 will be allowed in the routing table.
F. All rout es will be advertised out interfaces other than Ethernet 0.
第16题:
A. 10.10.10.16/28 only
B. 10.10.10.16/28 and 10.10.10.64/26
C. 10.10.10.16/28, 10.10.10.64/26, and 172.16.10.0/24
D. 10.10.10.64/26 only
第17题:
The 192.168.0.0 network is not being propagated throughout the network. Observe the BGP configuration commands from the advertising router.What is the reason the 192.168.0.0 route is not being advertised? ()
A. The network 192.168.0.0 statement is missing mask 255.255.0.0
B. The network 192.168.0.0 statement is missing mask 0.0.255.255.
C. The network 10.0.0.0 statement is missing mask 255 .0.0.0.
D. The network 10.0.0.0 statement is missing mask 0.255.255.255.
E. The auto - summary configuration is missing.
第18题:
以下()地址为主机保留,不能分配?
第19题:
There are three static routes in the routing table that need to be announced to your OSPF peers. Which method is used to accomplish this?()
第20题:
Which configuration causes RIP-learned routes to be advertised to other RIP neighbors?()
第21题:
192.168.0.0/16 only
192.168.50.0/24 only
192.168.50.0/24 and 192.168.51.0/24
192.168.0.0/17, 192.168.50.0/24, and 192.168.51.0/24
第22题:
192.168.0.0/16 only
192.168.0.0/17 only
192.168.50 0/24 and 192168.51.0/24
192.168.0.0/17, 192.168.50 0/24. and 192.168.51.0/24
第23题:
Apply an import policy to OSPF; this will import the static routes into OSPF
Apply an export policy to protocol static; this will export the routes to other protocols.
Apply an import policy to the forwarding table; this will import the routes, allowing them to be forwarded to OSPF neighbors.
Apply an export policy to OSPF; this will export the static routes to your OSPF neighbors.