单选题A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades, six HX5 blades with MAX5, one 1U external Fibre Channel switch, and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which of the following 

题目
单选题
A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades, six HX5 blades with MAX5, one 1U external Fibre Channel switch, and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which of the following is the minimum amount of rack space required to implement the solution?（）
A

32U 

B

25U 

C

22U 

D

21U

相似考题

1.A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）A.OSPFB.RIPC.FSPFD.VSANs

2. A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）A、4B、3C、2D、8

3. A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated.  The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage.  Each system has the following： ？ 2 integrated network ports ？   2 fibre channel adapter cards   ？ 1 power supply and redundant cooling   ？ HACMP v5.1   In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）A、One fibre channel switchB、Two fibre channel switchesC、Two Ethernet cardsD、Nothing

4.A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A、 OSPFB、 RIPC、 FSPFD、 VSANs

更多“单选题A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades, six HX5 blades with MAX5, one 1U external Fibre Channel switch, and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which of the following ”相关问题

  • 第1题：

    A customer wants to implement the following Blades in BladeCenter H:Two POWER Blades running IBM i partitions.Two POWER Blades running AIX and LinuxFour x86 Blades running Windows. Which of the following design consideration statements is correct?（）

    • A、The Blades must use the same CIOv and CFFh expansion adapter types.
    • B、Two physical BladeCenter H chassis will be required. One for the POWER Blades, the other for the x86  Blades.
    • C、The x86 Blades and POWER Blades may use different expansion adapters provided the POWER Blades  are in bays 1-7 and the x86 Blades are in slots 8-14.
    • D、The x86 Blades and POWER Blades may use different expansion adapters, provided the corresponding I/O modules to Blade midplane connections are configured in the Advanced Management Module (AMM).

    正确答案:A

  • 第2题：

    A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades， six HX5 blades with MAX5， one 1U external Fibre Channel switch， and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which is the minimum amount of rack space required to implement the solution of the following？（）

    • A、32U
    • B、21U
    • C、25U
    • D、22U

    正确答案:C

  • 第3题：

    A banking customer orders three IBM BladeCenter E chassis and thirty-four HS22 blades. Theustomer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy? （）

    • A、12 
    • B、10 
    • C、8 
    • D、6

    正确答案:B

  • 第4题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）

    • A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 
    • B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 
    • C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第5题：

    A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）

    • A、Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules
    • B、Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules
    • C、Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules
    • D、Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules

    正确答案:D

  • 第6题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
    • D、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    正确答案:C

  • 第7题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）
    A

    Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch

    B

    Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch

    C

    Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）
    A

    Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters

    B

    Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter

    C

    Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    D

    Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）
    A

    Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules

    B

    Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules

    C

    Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules

    D

    Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A customer wants to implement the following Blades in BladeCenter H:Two POWER Blades running IBM i partitions.Two POWER Blades running AIX and LinuxFour x86 Blades running Windows. Which of the following design consideration statements is correct?（）
    A

    The Blades must use the same CIOv and CFFh expansion adapter types.

    B

    Two physical BladeCenter H chassis will be required. One for the POWER Blades, the other for the x86  Blades.

    C

    The x86 Blades and POWER Blades may use different expansion adapters provided the POWER Blades  are in bays 1-7 and the x86 Blades are in slots 8-14.

    D

    The x86 Blades and POWER Blades may use different expansion adapters, provided the corresponding I/O modules to Blade midplane connections are configured in the Advanced Management Module (AMM).


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A banking customer orders three IBM BladeCenter E chassis and thirty-four HS22 blades. The customer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy？（）
    A

    6

    B

    8

    C

    10

    D

    12


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）
    A

    4

    B

    3

    C

    2

    D

    8


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）

    • A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. 
    • B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.
    • C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.
    • D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.

    正确答案:A

  • 第14题：

    A banking customer orders three IBM BladeCenter E chassis and thirty-four HS22 blades. The customer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy？（）

    • A、6
    • B、8
    • C、10
    • D、12

    正确答案:C

  • 第15题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）

    • A、Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch
    • B、Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch
    • C、Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第16题：

    A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades, six HX5 blades with MAX5, one 1U external Fibre Channel switch, and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which of the following is the minimum amount of rack space required to implement the solution?（）

    • A、32U 
    • B、25U 
    • C、22U 
    • D、21U

    正确答案:B

  • 第17题：

    A customer has the following equipment installed in their data center：  （1）an IBM BladeCenter H chassis （2）two power supplies  （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5.  Which of the following must be added to install the HX5 with MAX5？（）

    • A、Two additional power supplies
    • B、Fibre Channel （FC） switches and SAN storage
    • C、A Nortel 1/10 GB ESM
    • D、SSD for the HX5

    正确答案:A

  • 第18题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）
    A

    You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 

    B

    Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 

    C

    Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades， six HX5 blades with MAX5， one 1U external Fibre Channel switch， and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which is the minimum amount of rack space required to implement the solution of the following？（）
    A

    32U

    B

    21U

    C

    25U

    D

    22U


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A customer has the following equipment installed in their data center：  （1）an IBM BladeCenter H chassis （2）two power supplies  （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5.  Which of the following must be added to install the HX5 with MAX5？（）
    A

    Two additional power supplies

    B

    Fibre Channel （FC） switches and SAN storage

    C

    A Nortel 1/10 GB ESM

    D

    SSD for the HX5


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）
    A

    The FCoE card provides both LAN and fibre channel function from a single card on the blade. 

    B

    The FCoE advanced technology removes the need for any BladeCenter switching to support this function.

    C

    Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.

    D

    The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades, six HX5 blades with MAX5, one 1U external Fibre Channel switch, and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which of the following is the minimum amount of rack space required to implement the solution?（）
    A

    32U 

    B

    25U 

    C

    22U 

    D

    21U


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）
    A

    Configure 2CFFh combination fibre channel / gigabit Ethernet adapters

    B

    Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter

    C

    Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    D

    Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）
    A

    OSPF

    B

    RIP

    C

    FSPF

    D

    VSANs


    正确答案： D
    解析： 暂无解析

相关内容