单选题A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）A Install Windows from the CD using the QLogic driver provided on th

题目
单选题
A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）
A

Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.

B

Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. 

C

Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. 

D

Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD

相似考题

1.You are the desktop administrator for Ezonexam.com'ssalesdepartment. Ezonexam.com's network contains a RIS server.You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation.However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional.You start the computer by using a RIS bootable floppy disk, and you receive the same result.What should you do?A．Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.B．Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.C．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.D．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.E．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.

2.Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.

3.You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.

4.You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.

更多“单选题A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）A Install Windows from the CD using the QLogic driver provided on th”相关问题

  • 第1题：

    You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.

    When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."

    Which two actions should you take to eliminate the STOP error? (Choose Two)

    A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.

    B．Select Safe Mode from the Windows 2000 boot menu.

    C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.

    D．Install a driver for the SCSI controller from a floppy disk.

    E．Use Device Manager to update the driver for the SCSI controller.


    正确答案：AD
    解析：Explanation: To solve the problem posed in this scenario we must restart the Windows 2000 installation process and supply the correct SCSI driver. We cannot use Device Manager or Safe Mode at this stage since Windows 2000 is not installed yet. We must press F6 when Setup prompts us to do so. We must then press F6 again to supply the driver for a mass storage controller to the Windows 2000 Setup program.

    Incorrect answers:
    B: We cannot use Safe Mode at this stage, as Windows 2000 is not installed yet.

    C: We need to Windows 2000 Server CD-ROM to be able to perform. the install process.

    E: The Device Manager cannot be used at this stage since Windows 2000 is not installed yet.

  • 第2题：

    A work order states that a customer used Windows updates and after rebooting the computer， the video driver was corrupted and the computer was in safe mode. Which of the following would be the BEST action to take？（）

    • A、Download and install the correct video driver from the manufacturer’s web site.
    • B、Remove the video driver and reboot the computer.
    • C、Use the Driver Roll Back feature in Device Manager.
    • D、Go back to Windows update and specify the correct video driver.

    正确答案:C

  • 第3题：

    What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?（）

    • A、Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts 
    • B、Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts 
    • C、Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OK
    • D、Mount the IMM virtual disk

    正确答案:B

  • 第4题：

    You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server.  You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）

    • A、 Add an answer file to the root directory of the RIS bootable floppy disk.      Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
    • B、 Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk.     Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
    • C、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide an answer file on a floppy disk. 
    • D、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide a SCSI-controller driver on a floppy disk. 
    • E、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide the appropriate HAL on a floppy disk. 

    正确答案:D

  • 第5题：

    You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade the computer1. During the upgrade of computer2, a series of power outrages interrupts the upgrade.  You discover that upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.  What should you do? （）

    • A、On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys,Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM. 
    • B、From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys,Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart and upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM. 
    • C、On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.  
    • D、On computer1, perform a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager. 

    正确答案:C

  • 第6题：

    You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully.  Which two methods can you use to resolve the problem?（）

    • A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by     using the Emergency Repair Disk for the computer.
    • B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback     driver from the Windows 2000 Professional CD-ROM.
    • C、Restart the computer by using the last know good configuration.
    • D、Restart the computer in safe mode and reinstall the original network adapter driver. 
    • E、Restart the computer and disable Plug and Play in the computer BIOS.

    正确答案:C,D

  • 第7题：

    单选题
    What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?（）
    A

    Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts 

    B

    Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts 

    C

    Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OK

    D

    Mount the IMM virtual disk


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A blade server has been configured to boot from SAN.  After an HBA firmware upgrade the blade was rebooted and cannot find the operating system.  Which of the following should the administrator do NEXT to troubleshoot the issue？（）
    A

    Verify all HBA settings.

    B

    Upgrade the blade firmware.

    C

    Upgrade the OS level HBA drivers.

    D

    Set the system to boot from the local disk.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    Your company has a single Active Directory domain. All servers run Windows Server 2008. You install an iSCSI storage area network （SAN） for a group of file servers.  Corporate security policy requires that all data communication to and from the iSCSI SAN must be as secure as possible.  You need to implement the highest security available for communications to and from the iSCSI SAN. What should you do？（）
    A

    Create a Group Policy object （GPO） to enable the System objects： Strengthen default permission ofinternal systems objects setting.

    B

    Create a Group Policy object （GPO） to enable the System cryptography： Use FIPS compliant algorithms for encryption， hashing， and signing setting.

    C

    Implement IPsec security in the iSCSI Initiator Properties. Set up inbound and outbound rules by using Windows Firewall.

    D

    Implement mutual Microsoft Challenge Handshake Authentication Protocol （MS-CHAPv2） authentication in the iSCSI Initiator Properties. Set up inbound and outbound rules by using Windows Firewall.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）
    A

    Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.

    B

    Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. 

    C

    Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. 

    D

    Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A work order states that a customer used Windows updates and after rebooting the computer， the video driver was corrupted and the computer was in safe mode. Which of the following would be the BEST action to take？（）
    A

    Download and install the correct video driver from the manufacturer’s web site.

    B

    Remove the video driver and reboot the computer.

    C

    Use the Driver Roll Back feature in Device Manager.

    D

    Go back to Windows update and specify the correct video driver.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）
    A

    Fibre Channel Expansion Card for each Blade Server

    B

    cKVM Card for each Blade Server

    C

    iSCSI Expansion Card for each Blade Server

    D

    4Gb Modular Flash Drive


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）

    • A、Replace the video card with a compatible one.
    • B、Check the Windows XP Hardware Compatibility List.
    • C、Verify the boot order in the BIOS.
    • D、Install Windows XP RC2 first, then upgrade to Windows XP Media Center.

    正确答案:C

  • 第14题：

    A blade server has been configured to boot from SAN.  After an HBA firmware upgrade the blade was rebooted and cannot find the operating system.  Which of the following should the administrator do NEXT to troubleshoot the issue？（）

    • A、Verify all HBA settings.
    • B、Upgrade the blade firmware.
    • C、Upgrade the OS level HBA drivers.
    • D、Set the system to boot from the local disk.

    正确答案:A

  • 第15题：

    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）

    • A、Fibre Channel Expansion Card for each Blade Server
    • B、cKVM Card for each Blade Server
    • C、iSCSI Expansion Card for each Blade Server
    • D、4Gb Modular Flash Drive

    正确答案:C

  • 第16题：

    You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）

    • A、Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings
    • B、Start the computer in the debug mode. Restore the original adapter driver settings
    • C、Start the computer in Safe mode. Rename the AGP device by using device manager
    • D、Start the computer by using the recovery console. Rename the AGP driver. 

    正确答案:A

  • 第17题：

    A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）

    • A、Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
    • B、Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. 
    • C、Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. 
    • D、Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD

    正确答案:C

  • 第18题：

    An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）

    • A、The CD is defective.
    • B、The CD is not bootable.
    • C、The CD-ROM drive is defective.
    • D、The Boot Sequence is not set in the BIOS to boot first from the CD

    正确答案:D

  • 第19题：

    单选题
    You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）
    A

    Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings

    B

    Start the computer in the debug mode. Restore the original adapter driver settings

    C

    Start the computer in Safe mode. Rename the AGP device by using device manager

    D

    Start the computer by using the recovery console. Rename the AGP driver. 


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    The Certkiller has a Windows 2008 domain controller server. This server is routinely backed up over the network from a dedicated backup server that is running Windows 2003 OS. You need to prepare the domain controller for disaster recovery apart from the routine backup procedures. You are unable to launch the backup utility while attempting to back up the system state data for the data controller. You need to backup system state data from the Windows Server 2008 domain controller server. What should you do（）
    A

    Add your user account to the local Backup Operators group

    B

    Install the Windows Server backup feature using the Server Manager feature.

    C

    Install the Removable Storage Manager feature using the Server Manager feature

    D

    Deactivating the backup job that is configured to backup Windows 2008 server domain controller on the Windows 2003 server.

    E

    None of the above


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）
    A

    Replace the video card with a compatible one.

    B

    Check the Windows XP Hardware Compatibility List.

    C

    Verify the boot order in the BIOS.

    D

    Install Windows XP RC2 first, then upgrade to Windows XP Media Center.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server.  You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）
    A

     Add an answer file to the root directory of the RIS bootable floppy disk.      Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 

    B

     Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk.     Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 

    C

     Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide an answer file on a floppy disk. 

    D

     Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide a SCSI-controller driver on a floppy disk. 

    E

     Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide the appropriate HAL on a floppy disk. 


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）
    A

    The CD is defective.

    B

    The CD is not bootable.

    C

    The CD-ROM drive is defective.

    D

    The Boot Sequence is not set in the BIOS to boot first from the CD


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade the computer1. During the upgrade of computer2, a series of power outrages interrupts the upgrade.  You discover that upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.  What should you do? （）
    A

    On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys,Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM. 

    B

    From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys,Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart and upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM. 

    C

    On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.  

    D

    On computer1, perform a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager. 


    正确答案： C
    解析： You can create the four setup boot disks by using either makeboot.exe or makebt32.exe. Both are located in the /Bootdisk directory on the Windows 2000 installation CD. These disks can be used to restart the installation process on computer2.

相关内容