tty rs232 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port
tty rs422 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port
tty rs232 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port
tty rs422 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port
第1题:
To enable a tty port to be used for a cu session what must be done to the system?()
第2题:
Which of the following lines will be added to the file /usr/lib/uucp/Devices on the SLIP server machine for a SLIP connection on tty1?()
第3题:
What is the correct fastpath to configure or add a TTY Terminal (directly from the screen), which connects to a serial port?()
第4题:
Which of the following commands should be used to check the settings for a new tty that was just set up as tty2?()
第5题:
Which of the following lines will be added to the file /usr/lib/uucp/Devices on the SLIP client machine for a SLIP connection on tty1?()
第6题:
Create an entry for tty2 in the /etc/uucp/Devices file
Re-enter the command as cu -dml tty2
Create an entry for tty2 in the /etc/uucp/Systems file
Re-enter the command as cu -s 9600 -dh -t -l tty2
第7题:
smitty tty
smitty devices
smitty pty
smitty dev
第8题:
The bus is limited to 64 devices.
It is a full-duplex serial standard.
It is a half-duplex serial standard.
It allows up to 320 MB/s of shared channel bandwidth.
第9题:
smit tty; take the defaults and create the desired tty
lsdev -Cc tty; check to see if the desired tty exists, if not create using smit tty Add a line similar to; Direct tty0 - 9600 direct to /etc/uucp/Devices Verify /etc/uucp/Dialers has the following line; direct
Install bos.net.uucp and the first available tty will be configured for use by a cu session
Run the Asynchronous Terminal Emulation (ate) program and it will configure a tty port for a cu session
第10题:
cu -l tty2
cu -dml tty2
cu -dht Direct
cu -s9600 -l tty2
第11题:
tty rs232 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port
tty rs422 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port
tty rs232 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port
tty rs422 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port
第12题:
A Group Policy object (GPO) should be created. Enable the Set the Terminal Services licensing modepolicy setting should be enabled and the Per Device option chosen. The GPO should be applied to S01.
A Group Policy object (GPO) should be created. Enable the Set the Terminal Services licensing modepolicy setting should be enabled and the Per Device option chosen. The GPO should be applied to S02.
A Group Policy object (GPO) should be created. The Set the Terminal Services licensing mode policysetting should be enabled and the Per User option should be chosen. The GPO should be applied to S01.
A Group Policy object (GPO) should be created. The Set the Terminal Services licensing mode policysetting should be enabled and the Per User option should be chosen. The GPO should be applied to S02.
第13题:
When enabling a tty port to be used for a cu session, what must be done on the system?()
第14题:
To add a TTY Terminal to Serial port 1, which of the following set of options should be chosen?()
第15题:
Which of the following commands should be used to open a tty port configured in the /etc/uucp/Devices file as: Direct tty2 - 9600 direct in debug mode, ignoring modem control signal data carrier detect (DCD)?()
第16题:
You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers,configuring Windows Server 2008 Terminal services and network application services, and configuring aweb services infrastructure. There is an Active Directory domain in your company. Windows Server 2008 isrun by two servers named S01 and S02. The Terminal Services server role is installed on S01. TheTerminal Services Licensing role service is installed on S02. Only 10 Terminal Services Client AccessLicenses are available. Now you receive an order from the company management. According to the company requirement, you have to limit the number of concurrent users connected to the Terminal Serverto 10. So what action should you perform?()
第17题:
A system administrator has created tty2 on a serial port connection to a system. When attempting to verify the connection the following error is observed: # cu -ml tty2 cu: 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error?()
第18题:
Use either s1 or s2 port configured as a TTY interface with a NULL Modem cable.
Use the s2 serial port on each system configured as a TTY interface with a NULL modem cable.
Use the s1 port on each system configured as a TTY interface with a standard serial modemcable.
Verify with IBM support which native serial ports for the server model can be used for HACM pheartbeats.
第19题:
lsattr -El tty2
lscons -d /dev/tty2
lscfg -vl tty2
what /dev/tty2
第20题:
direct 9600 - /dev/tty1
Direct tty1 - 9600
Direct /dev/tty1 - 9600
direct tty1 - 9600
第21题:
RJ-11 connector
DB-15 connector
DB-9 connector
RJ-45 connector
第22题:
控制台端口(Console port )
异步串行端口(Asynchronous Serial Port )
辅助端口(AuxiliaryPort )
虚拟端口(Virtual user terminal interface )
第23题:
direct 9600 - tty1
direct tty1 - 9600
Direct tty1 - 9600
Direct /dev/tty1 - 9600
第24题:
smit tty; take the defaults and create the desired tty
In the /etc/uucp Devices add a line similar to: Direct ttyX - 9600 direct
Install bos.net.uucp and the first available tty will be configured for use by a cu session
Run the Asynchronous Terminal Emulation (ATE) program and it will configure a tty port for a cu session