单选题A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）A The drive jumper s

题目
单选题
A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）
A

The drive jumper settings are incorrect.

B

The drive is not receiving power from PSU.

C

Windows only supports one optical drive.

D

The user connected the drive with a SATA cable.

相似考题

1.A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS.Which of the following would be the FIRST step in regaining access to the drive?（）A. Reformat the NTFS partition.B. Recreate the partition that was deleted.C. Rewrite the MBR.D. Run a check disk on the drive

2.A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）A、Optical driveB、Power supplyC、CMOS batteryD、CD-ROM disk

3. A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive.  Which of the following is the MOST likely cause of the failures？（）A、 The backplane has failed and needs to be replaced.B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.C、 There is a conflict with the optical drive on the server.D、 The server power supply is failing and not providing enough power for all the drives.

4.After performing the initial steps in installing the server OS from a DVD-ROM， the server reboots and goes back into the setup wizard. Which of the following is the MOST likely cause for this problem？（）A、The DVD-ROM drive has failed.B、An installation file copied from the DVD to the hard drive is corrupt.C、Faulty OS installation DVDD、Incorrect boot sequence in the BIOS

更多“单选题A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）A The drive jumper s”相关问题

  • 第1题：

    A technician notices that there is a second partition on the primary hard drive. This partitionis notassigned a drive letter and is not accessible from Windows. Which of the following is the MOST likely explanation for this extra partition?（）

    • A、Space reserved by the drive manufacturer for firmware.
    • B、Space set aside by Windows for use by the virtual memory swap file.
    • C、A potentially dangerous virus has been downloaded onto the system.
    • D、A recovery partition put there by the manufacturer.

    正确答案:D

  • 第2题：

    A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing？（）

    • A、The floppy drive
    • B、The hard drive
    • C、The CD-ROM drive
    • D、The DVD-ROM drive

    正确答案:A

  • 第3题：

    After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?（）

    • A、There is a non-bootable CD in the CD-ROM drive.
    • B、There is a non-bootable DVD in the DVD-ROM drive.
    • C、There is a non-bootable Blu-Ray in the Blu-Ray drive.
    • D、There is a non-bootable floppy in the floppy drive.

    正确答案:D

  • 第4题：

    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）

    • A、The new drive’s jumper is set for master.
    • B、The new drive is connected to the secondary bus as a slave drive.
    • C、Both drives’ jumpers are set for cable select.
    • D、The old drive’s jumper is set for master and the new drive is set for slave.

    正确答案:A

  • 第5题：

    A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）

    • A、The drive jumper settings are incorrect.
    • B、The drive is not receiving power from PSU.
    • C、Windows only supports one optical drive.
    • D、The user connected the drive with a SATA cable.

    正确答案:A

  • 第6题：

    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）

    • A、The hard drive is not formatted.
    • B、The BIOS is corrupted.
    • C、The motherboard has faulty capacitors.
    • D、The drive cable is backwards

    正确答案:D

  • 第7题：

    单选题
    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of thefollowing would be the FIRST step in regaining access to the drive？ （）
    A

     Reformat the NTFS partition.

    B

     Recreate the partition that was deleted.

    C

     Rewrite the MBR.

    D

     Run a check disk on the drive.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive.  Which of the following is the MOST likely cause of the failures？（）
    A

     The backplane has failed and needs to be replaced.

    B

     The array must be disbanded and recreated from a backup source to recognize the replacement drive.

    C

     There is a conflict with the optical drive on the server.

    D

     The server power supply is failing and not providing enough power for all the drives.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）
    A

    The second hard drive has not been formatted for NTFS.

    B

    The jumpers on both drives are set to the cable select position.

    C

    The jumper on the first drive is set to master and the second is set to slave.

    D

    The jumpers on both drives are set to the master position.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）
    A

    The drive jumper settings are incorrect.

    B

    The drive is not receiving power from PSU.

    C

    Windows only supports one optical drive.

    D

    The user connected the drive with a SATA cable.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）
    A

    Reformat the NTFS partition.

    B

    Recreate the partition that was deleted.

    C

    Rewrite the MBR.

    D

    Run a check disk on the drive


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?（）
    A

    There is a non-bootable CD in the CD-ROM drive.

    B

    There is a non-bootable DVD in the DVD-ROM drive.

    C

    There is a non-bootable Blu-Ray in the Blu-Ray drive.

    D

    There is a non-bootable floppy in the floppy drive.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

    • A、The second hard drive has not been formatted for NTFS.
    • B、The jumpers on both drives are set to the cable select position.
    • C、The jumper on the first drive is set to master and the second is set to slave.
    • D、The jumpers on both drives are set to the master position.

    正确答案:D

  • 第14题：

    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）

    • A、 Reformat the NTFS partition.
    • B、 Recreate the partition that was deleted.
    • C、 Rewrite the MBR.
    • D、 Run a check disk on the drive.

    正确答案:D

  • 第15题：

    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）

    • A、Reformat the NTFS partition.
    • B、Recreate the partition that was deleted.
    • C、Rewrite the MBR.
    • D、Run a check disk on the drive

    正确答案:D

  • 第16题：

    A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）

    • A、The power supply has failed.
    • B、The drive cable is connected backwards.
    • C、The floppy drive has failed.
    • D、The proper drivers have not been loaded.

    正确答案:B

  • 第17题：

    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of thefollowing would be the FIRST step in regaining access to the drive？ （）

    • A、 Reformat the NTFS partition.
    • B、 Recreate the partition that was deleted.
    • C、 Rewrite the MBR.
    • D、 Run a check disk on the drive.

    正确答案:D

  • 第18题：

    单选题
    A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）
    A

    Optical drive

    B

    Power supply

    C

    CMOS battery

    D

    CD-ROM disk


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）
    A

    Move the page file to the new drive.

    B

    Copy the system32 directory to the new drive.

    C

    Convert the C drive to a basic disk.

    D

    Setup a software RAID to mirror the C drive.


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）
    A

    The new drive’s jumper is set for master.

    B

    The new drive is connected to the secondary bus as a slave drive.

    C

    Both drives’ jumpers are set for cable select.

    D

    The old drive’s jumper is set for master and the new drive is set for slave.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）
    A

    The hard drive is not formatted.

    B

    The BIOS is corrupted.

    C

    The motherboard has faulty capacitors.

    D

    The drive cable is backwards


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）
    A

     Reformat the NTFS partition.

    B

     Recreate the partition that was deleted.

    C

     Rewrite the MBR.

    D

     Run a check disk on the drive.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing？（）
    A

    The floppy drive

    B

    The hard drive

    C

    The CD-ROM drive

    D

    The DVD-ROM drive


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    A technician notices that there is a second partition on the primary hard drive. This partitionis notassigned a drive letter and is not accessible from Windows. Which of the following is the MOST likely explanation for this extra partition?（）
    A

    Space reserved by the drive manufacturer for firmware.

    B

    Space set aside by Windows for use by the virtual memory swap file.

    C

    A potentially dangerous virus has been downloaded onto the system.

    D

    A recovery partition put there by the manufacturer.


    正确答案： D
    解析： 暂无解析

相关内容