单选题What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX 6.1？（）A 128MB 256MC 512MD 1024M

题目
单选题
What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX 6.1？（）
A

128M

B

256M

C

512M

D

1024M

相似考题

1.A client has a temporary deployment of a new static application that needs to run for a short period of time and is not going to change.How can this deployment be achieved with a minimum of effort and time?（）A.Run a system WPAR and deploy the application.B.Create a new LPAR and deploy the application.C.Create an application WPAR to deploy the application.D.Create an LPAR hosted by a VIO server and deploy the application.

2. A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A、DLPAR functions are not available for cloned partitionsB、The new partition has the same node number as the original LPARC、Additional filesets need to be reinstalled after the alt_disk_install cloningD、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

3.On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）A、2 B、3 C、4 D、8

4.What are two requirements to perform a warm Cisco IOS upgrade on a Cisco ISR router? （）(Choose two.)A、at least one enabled Ethernet interfaceB、Cisco IOS version 12.3(2)T or greaterC、enough memory to decompress the new Cisco IOS imageD、internal flash memory equaling two times the space required for the current Cisco IOS image

更多“What is the minimum amount of memory required for a new LPAR”相关问题

  • 第1题：

    An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation： LPAR 1 memory ： min = 10 GB des = 15 GB max = 24 GB  LPAR 2memory ： min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory， but the operation fails. The administrator can  however allocate 512 MB that is free to LPAR 1 on the 570.  What is the most likely cause of this failure when dynamically moving memory？（）

    • A、 Maxperm% is set too low on LPAR 2
    • B、 Insufficient paging space on LPAR 1
    • C、 Service IBM.DRM is unavailable on LPAR 1
    • D、 Insufficient pinnable memory frames available on LPAR 2

    正确答案:D

  • 第2题：

    A user is receiving an error about not having enough virtual memory. A technician wants to manually set the amount of available virtual memory for the computer. At a MINIMUM， the technician should set the virtual memory to be which of the following？（）

    • A、0.5 times the amount of physical memory
    • B、1.5 times the amount of physical memory
    • C、2 times the amount of physical memory
    • D、Equal to the amount of physical memory

    正确答案:B

  • 第3题：

    A customer wants to add a new application to their existing IBM System Storage DS5300. Theyexpect that the new application will require a minimum of 15，000 additional IOPS. What toolshould be used to determine what additional disk is required to effectively add the newapplication？（）

    • A、eConfig
    • B、Disk Magic
    • C、Capacity Magic
    • D、Tivoli Storage Productivity Center for Data

    正确答案:B

  • 第4题：

    A System p customer is planning to implement virtualization and is concerned about how to respond  to an increased workload and what limitations there are for very small workloads.  Which of the following describes the minimum size for an LPAR and the minimum amount that can be transferred from on LPAR to another（）

    • A、Smallest partition 10% of all available processors， as small as 1% of all available processors may be transferred.
    • B、Smallest partition 10% of a processor， as small 1% of a processor may be transferred.
    • C、Smallest partition one processor， as small 1% of a processor may be transferred.
    • D、Smallest partition one core， as small 10% of a processor may be transferred.

    正确答案:B

  • 第5题：

    An application vendor wants to choose a fault tolerant platform for their new application.  The application benefits from multiple processors and has been tested on Red Hat Advanced Server 3.  To determine the memory requirements for the application， which of the following is the best procedure？（）

    • A、The application should be tested and baselines should be measured with simulated user loads.
    • B、The application should be tested with the minimum amount of memory then increase the memory in increments until an acceptable response is achieved.
    • C、The application should be tested with differing amounts of memory and the fastest response time is reached it should be used as the acceptable configuration.
    • D、The application should be tested with the maximum amount of memory then decrease the memory in increments until an acceptable price/performance ratio is reached.

    正确答案:A

  • 第6题：

    Your database is configured in shared server mode. However， your senior DBA asks you to modifythe value of the PRIVATE_SGA limit in the profile of the users.  What could be the reason for this（）

    • A、to limit the User Global Area （UGA） memory allocated to a session from the SGA
    • B、to limit the amount of memory to be used for the dispatcher queue of a session in SGA
    • C、to limit the amount of memory to be used for the request pool in System Global Area （SGA）
    • D、to control the amount of memory allocated in SGA for the local variables for each shared server process

    正确答案:A

  • 第7题：

    单选题
    On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）
    A

    2 

    B

    3 

    C

    4 

    D

    8


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation： LPAR 1 memory ： min = 10 GB des = 15 GB max = 24 GB  LPAR 2memory ： min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory， but the operation fails. The administrator can  however allocate 512 MB that is free to LPAR 1 on the 570.  What is the most likely cause of this failure when dynamically moving memory？（）
    A

     Maxperm% is set too low on LPAR 2

    B

     Insufficient paging space on LPAR 1

    C

     Service IBM.DRM is unavailable on LPAR 1

    D

     Insufficient pinnable memory frames available on LPAR 2


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX6.1?（）
    A

    128MB

    B

    256MB

    C

    512MB

    D

    1024MB


    正确答案： A
    解析： 暂无解析

  • 第10题：

    多选题
    What are two requirements to perform a warm Cisco IOS upgrade on a Cisco ISR router? （）(Choose two.)
    A

    at least one enabled Ethernet interface

    B

    Cisco IOS version 12.3(2)T or greater

    C

    enough memory to decompress the new Cisco IOS image

    D

    internal flash memory equaling two times the space required for the current Cisco IOS image


    正确答案： D,C
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?（）
    A

    The Power 550 is licensed for three LPARs only.

    B

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.

    C

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks.

    D

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX6.1（）？
    A

    128 MB

    B

    256 MB

    C

    512 MB

    D

    1024 MB


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A new computer is displaying the wrong amount of memory. Which of the following may be the cause？（）

    • A、The module is installed backwards.
    • B、A USB device is using some memory.
    • C、An onboard video card is using some memory.
    • D、The CPU is using some memory.

    正确答案:C

  • 第14题：

    In relation to the system’s Logical Memory Block （LMB） size， when creating an LPAR using Integrated Virtualization Manager （IVM），  what is the largest allocation of memory allowed？（）

    • A、 128MB
    • B、 256MB
    • C、 512MB
    • D、 1024MB

    正确答案:B

  • 第15题：

    What is the minimum recommended amount of memory that can be assigned to a new VIO server？（）

    • A、128MB
    • B、256MB
    • C、512MB
    • D、1GB

    正确答案:B

  • 第16题：

    What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX6.1（）？ 

    • A、128 MB
    • B、256 MB
    • C、512 MB
    • D、1024 MB

    正确答案:B

  • 第17题：

    A customer is adding a new p5 machine to their environment.  The machine will host several DB2 partitions running AIX 5.2.  They currently have two SAN directors and an IBM ESS.  The SAN design allows for concurrent maintenance.  What is required on each partition to attach to the SAN？（）

    • A、A minimum of two HBAs； the customer will need to download SDD
    • B、A minimum of four HBAs； the customer will need to download SDD
    • C、A minimum of two HBAs； the customer will need to configure MPIO
    • D、A minimum of four HBAs； the customer will need to configure MPIO

    正确答案:A

  • 第18题：

    What are the advantages of variable extent size support for large ASM files?（）

    • A、It improves resync operations when the disk comes online after being taken offline for maintenance purposes. 
    • B、It improves performance in the extended cluster configuration by reading from a local copy of an extent. 
    • C、Fewer extent pointers are needed to describe the file and less memory is required to manage the extent maps in the shared pool.
    • D、This feature enables faster file opens because of the reduction in the amount of memory that is required to store file extents.

    正确答案:C,D

  • 第19题：

    单选题
    A client has a temporary deployment of a new static application that needs to run for a short period of time and is not going to change. How can this deployment be achieved with a minimum of effort and time?（）
    A

    Run a system WPAR and deploy the application.

    B

    Create a new LPAR and deploy the application.

    C

    Create an application WPAR to deploy the application.

    D

    Create an LPAR hosted by a VIO server and deploy the application.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    What is the minimum number of deck officers，able seaman or certificated persons required for a lifeboat on a vessel in ocean service?（）
    A

    Two

    B

    Three

    C

    Four

    D

    Five


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    A user is receiving an error about not having enough virtual memory. A technician wants to manually set the amount of available virtual memory for the computer. At a MINIMUM， the technician should set the virtual memory to be which of the following？（）
    A

    0.5 times the amount of physical memory

    B

    1.5 times the amount of physical memory

    C

    2 times the amount of physical memory

    D

    Equal to the amount of physical memory


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX 6.1?（）
    A

    128M

    B

    256M

    C

    512M

    D

    1024M


    正确答案： B
    解析： 暂无解析

  • 第23题：

    多选题
    What are the advantages of variable extent size support for large ASM files?（）
    A

    It improves resync operations when the disk comes online after being taken offline for maintenance purposes.

    B

    It improves performance in the extended cluster configuration by reading from a local copy of an extent.

    C

    Fewer extent pointers are needed to describe the file and less memory is required to manage the extent maps in the shared pool.

    D

    This feature enables faster file opens because of the reduction in the amount of memory that is required to store file extents.


    正确答案： A,D
    解析： 暂无解析

  • 第24题：

    单选题
    The minimum amount of oxygen required to support life is（）
    A

    14 percent

    B

    15 percent

    C

    16 percent

    D

    17 percent


    正确答案： C
    解析： 暂无解析

相关内容