单选题Following a system boot，the display indicates that previously detected hardware is missing.  Which of the following commands would identify the missing hardware？（）A diagB lscfgC cfgmgrD lsslot

题目
单选题
Following a system boot，the display indicates that previously detected hardware is missing.  Which of the following commands would identify the missing hardware？（）
A

diag

B

lscfg

C

cfgmgr

D

lsslot

相似考题

1.单选题After updating serverB’s network configurations， an administrator notices that serverA， which resides in a different subnet， is unable to communicate with serverB via ssh or telnet. As ping’s to the server fail， the administrator logs onto serverB via a console and finds an available interface en0 in the ’up’ state. From the console connection， en0 can communicate with other servers in the same subnet. What is the most likely cause of the problem？（）A en0 has no associated ip address.B serverB is missing its default route.C serverB and serverA cannot connect due to a firewall.D en0 has been set up to block traffic from servers that are in different subnets.

2.单选题Which command will enable RBAC on a server?（）A setkst -t enable ; rebootB chrbac -a enable ; rebootC enable enhanced_RBAC ; rebootD chdev -l sys0 -a enhanced_RBAC='true' ; reboot

3.单选题The administrator created an entry in the inittab for run level 2. The system was already booted in normal mode. Which will start the newly created entry?（）A init 1B /etc/rcC telinit qD /etc/rc.d/rc2.d

4.单选题A recently installed package needs to be rolled back to a previous version. Which of the following commands will perform the task？（）A rejectB cleanupC deinstallD uninstall

更多“Following a system boot，the display indicates that previousl”相关问题

  • 第1题：

    单选题
    What is the correct method for deleting ’paging04’ paging space？（）
    A

    swapoff paging04 rmps paging04

    B

    swapoff /dev/paging04 rmps paging04

    C

    swapoff paging04 rmps /dev/paging04

    D

    swapoff /dev/paging04 rmps /dev/paging04


    正确答案： A
    解析： 暂无解析

  • 第2题：

    单选题
    Where can the Open Source prerequisite filesets that allow the installation of the Firefox Web browser be found?（）
    A

    Fix Central

    B

    IBM AIX Toolbox

    C

    AIX Expansion Pack

    D

    Common base AIX CDs


    正确答案： A
    解析： 暂无解析

  • 第3题：

    单选题
    The output of the command displays the following. The output of the command displays the following. FSUID PID PPID C PRI NI ADDR SZ TTY TIME CMD 120005 A0 40931 392412 67 20 1b23 201 pts/0 0.00 scriptA 100023 A 0 34596 23441 4 69 20 a328 341 pts/00.00 scriptB. What must be done to ensure scriptB receives dispatching priority over scriptA?（）
    A

    Run 'nice' command to increase the the NI value of scriptB

    B

    Run 'nice' command to increase the the NI value of scriptA

    C

    Run 'renice' command to increase the the NI value of scriptB

    D

    Run 'renice' command to increase the the NI value of scriptA


    正确答案： D
    解析： 暂无解析

  • 第4题：

    单选题
    Which command will activate a defined paging space?（）
    A

    swapon paging01

    B

    chps a y paging01

    C

    mkps a /dev/paging01

    D

    swap a /dev/paging01


    正确答案： B
    解析： 暂无解析

  • 第5题：

    单选题
    A non-root user can run rsh commands from serverA to serverB, but attempts to run rsh commands by the root user return with apermission error message. What action will resolve the problem?（）
    A

    Add root user to the /etc/hosts.equiv on serverB

    B

    Create $HOME/.rhosts file for the root user on serverB

    C

    Restart the rshd daemon with root enabled option on serverB

    D

    Add entry to allow root user from serverA to the /etc/hosts.allow on serverB


    正确答案： D
    解析： 暂无解析

  • 第6题：

    单选题
    Following an unscheduled power outage, theadministrator needs to power up an IVM-managed system. For the given system,what is the first step in this process?（）
    A

    Physically press the appropriate button on the system.

    B

    Physically disconnect and reconnect the power cable on the system.

    C

    Log into the IVM using a Web Browser, select the managed-system and select the Power on option from the Operations menu.

    D

    Log into the HMC using a Web Browser, select the managed-system and select the Power on option from the Operations menu.


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    Which are the two main uses of a VIO server？（）
    A

    Virtualize network and memory to LPARs.

    B

    Virtualize network and storage to LPARs.

    C

    Virtualize memory and processors to LPARs.

    D

    Virtualize storage and processors to LPARs.


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    Which command will migrate a filesystem from one volume group to another？（）
    A

    cpfs

    B

    cplv

    C

    mkfscopy

    D

    migratepv


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    Which command will remove the ’stale’ status from a logical volume？（）
    A

    syncvg -p

    B

    syncvg -l

    C

    synclv -p

    D

    synclv -l


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator wants to mirror an importantfilesystem between two disks without mirroring the entire volume group. Which command should be used?（）
    A

    cplv

    B

    mirrorvg

    C

    mklvcopy

    D

    migratel


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    On which HMC GUI panel can the ’Enable Electronic Service Agent’ option be found？（）
    A

    HMC Management

    B

    Systems Management

    C

    Service Management

    D

    Electronic Management


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）
    A

    Run a bosboot -a command

    B

    Mirror the hd5 on the two disks

    C

    Set up another service mode bootlist

    D

    Check the disks using a lsvg -p rootvg command


    正确答案： B
    解析： 暂无解析

  • 第13题：

    单选题
    An administrator is trying to extend an existing volume group with a new hard disk, but the extendvg command returns the following error. 0516-1162 /usr/sbin/extendvg. Warning, The Physical Partition Size of 64 requires the creation of 8924 partitions for hdisk11. The limitation for volume group datavg is 1016 physical partitions per physical volume. Use chvg command with -t option to attempt to change the maximum Physical Partitions per Physical volume for this volume group. The chvg -t may or may not allow the extendvg command to succeed. What is the implication of using this option?（）
    A

    It reduces the maximum file size allowed within the given volume group.

    B

    It reduces the maximum number of files allowed within the given volume group.

    C

    It reduces the maximum number of logical volumes allowed within the given volume group.

    D

    It reduces the maximum number of physical volumes allowed within the given volume group.


    正确答案： D
    解析： 暂无解析

  • 第14题：

    单选题
    Which command will allow the creation of a10-character login user name?（）
    A

    chlogin -a log_name=10

    B

    chdev -l sys0 -a max_logname=10

    C

    chusr extended_logname=true [userid]

    D

    chuser login_name=10 extended_logname=true [userid]


    正确答案： D
    解析： 暂无解析

  • 第15题：

    单选题
    During system boot, rootvg fails to vary on, causing an LED code of 0552. What is the most likely cause for rootvg not varying on?（）
    A

    Missing blv

    B

    Network problem

    C

    Wrong boot table

    D

    Corrupted file system


    正确答案： D
    解析： 暂无解析

  • 第16题：

    单选题
    Which command should be used to capture network traffic between the localhost and a host named ‘webserver’?（）
    A

    tcpdump webserver

    B

    tcpdump host webserver

    C

    tcpdump -hostname webserver

    D

    tcpdump -print -h webserver


    正确答案： D
    解析： 暂无解析

  • 第17题：

    单选题
    An administrator has received complaints from users that an application is not available while other applications run. This application resides on an NFS mounted filesystem. Which of the following commands should be run as a reasonable first step to handle this problem？（）
    A

    df

    B

    showmount

    C

    exportfs

    D

    refresh -g nfs


    正确答案： C
    解析： 暂无解析

  • 第18题：

    单选题
    An administrator is investigating why a non-prompted NIM rte install is failing after the successful netboot of the spot. A matching spot and lpp_source are correctly allocated to the NIM client in addition to a bosinst_data.What is the most likely cause of the install failure？（）
    A

    The bosinst_data has an incorrect console defined.

    B

    The bosinst_data is incompatible with the level of spot.

    C

    The bosinst_data has an incorrect disk location defined.

    D

    The bosinst_data has an incorrect language option defined.


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    An administrator is moving a volume group from one server to another. The disks will be physically moved between the two systems. Which two operations are required on the volume group prior to the physical disk switch?（）
    A

    'varyoffvg' and 'exportvg'

    B

    'varyofflv' and 'importvg'

    C

    'varyofflv' and 'migratepv'

    D

    'varyoffvg' and 'migratevg'


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    Which command will create a group called ‘delivery’and set the administrators to john’ and ‘mary’?（）
    A

    mkgroup -A=john,mary delivery

    B

    groupadd -A=john,mary delivery

    C

    mkgroup adms=john,mary delivery

    D

    groupadd adms=john,mary delivery


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which command will list the top 5 memory intensive processes?（）
    A

    lsmem -pu 5

    B

    lsps -psu 5

    C

    svmon -Put 5

    D

    ps -au  sort -rn +4


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Files /tmp/file2 and /tmp/file3 are hard linked to /tmp/file1.  What will the result be if a user makes changes to /tmp/file2 at the same time another user tries to delete /tmp/file1？（）
    A

    All three files will contain the updates and will remain available.

    B

    All three files will be deleted and no changes will be made to /tmp/file2.

    C

    Only /tmp/file2 will contain the updates， but /tmp/file3 will remain available.

    D

    Both /tmp/file2 and /tmp/file3 will contain the updates and will remain available.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator needs to configure a server (192.168.22.22) as a temporary solution for an NTP master that has stopped working. What is the process for configuring the NTP master?（）
    A

    Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'fudge 127.127.1.0 stratum 0', and then refresh the daemon.

    B

    Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'master 127.127.1.0 stratum 0', and then refresh the daemon.

    C

    Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'fudge 192.168.22.22 stratum 0', and then refresh the daemon.

    D

    Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'master 192.168.22.22 stratum 0', and then refresh the daemon.


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following explains the relationship between a physical and logical partition?（）
    A

    A physical partition is hosted on one or more logical partitions. A logical partition is used when describing storage.

    B

    A logical partition is hosted on one or more physical partitions. A physical partition is used when describing storage.

    C

    A physical partition is used when describing only a SCSI or SAS disk. A logical partition is used when describing a SAN LUN.

    D

    A logical partition is used when describing only a SATA or SAS disk. A physical partition is used when describing RAID or mirrored arrays.


    正确答案： B
    解析： 暂无解析

相关内容