多选题Which two commands would you use to view OSPF routes?（）Ashow ip route ospfBshow ospf routesCshow route protocol ospfDshow route

题目

多选题

Which two commands would you use to view OSPF routes?（）

show ip route ospf

show ospf routes

show route protocol ospf

show route

相似考题

1.Referring to the exhibit, which two statements are true?()A. The route 192.168.1.0/25 is acceptedB. The route 192.168.2.0/24 is acceptedC. OSPF routes will be exported into RIPD. RIP routes will be exported into OSPF

2.Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?（）router ospf 1redistribute ospf 2 external 2 route - map fred!route - map fred permit 10match ip address 1set metric - type type - 1A. No routes are redistributed because a route cannot be both E1 and E2.B. Only OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.C. Inside the OSPF 2 domain, any formerly E2 routes will become E1 routes.D. Routes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.

3.Refer to the exhibit. A new TAC engineer comes to you for advice. The engineer wants to configure RIPv2 - OSPF two - way redistribution while avoiding routing loops. Which two additio ns to the router B1 configuration should the engineer make?（）A. access - list 40 deny 172.16.1.0 0.0.0.255 access - list 40 permit any router rip redistribute ospf 100 metric 5 distribute- list 40 out ospf 100B. ip prefix - list rip_routes permit 172. 16.1.16/25 ge 26 le 28 route - map redis - ospf deny 10 match ip address prefix- list rip_routes router rip redistribute ospf 10 route - map redis - ospf subnetsC. ip prefix - list rip - to - ospf permit 10.1.1.8/25 ge 26 le 28 route - map redis - rip deny 20 match i p address prefix - list rip - to - ospf router ospf 100 redistribute rip route - map redis - rip subnetsD. access - list 15 deny 10.1.1.0 0.0.0.63 access - list 15 permit any route - map redis - rip deny 10 match ip address 15 route - map redis - rip permit 20 router os pf 100 redistribute rip route - map redis - rip subnets

4.Which command allows viewing of only OSPF routes?()A.show ip ospf routeB.show ip route protocol ospfC.show route protocol ospfD.show ospf table

更多“多选题Which two commands would you use to view OSPF routes?（）Ashow ip route ospfBshow ospf routesCshow route protocol ospfDshow route”相关问题

第1题：

Which two statements about route redistribution when implementing OSPF are true?()

A. Routes learned using any IP routing protocol can only be redistributed into non IP routing protocols.
B. OSPF can import routes learned using EIGRP, RIP, and IS - IS.
C. OSPF routes cannot be exported into EIGRP, RIP, an d IS - IS.
D. At the interdomain level, OSPF cannot import routes learned using BGP.
E. OSPF routes can be exported into BGP.

参考答案：B, E
第2题：

A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
A.The router will use the static route.
B.The router will use the OSPF route.
C.The router will use the EIGRP route.
D.The router will load balance and use all three routes.

参考答案：A
第3题：

A router simultaneously receives all the following routes in various routing updates. Which of thefollowing routes would end up in the routing table？（Choose all that apply.）（）
- A、RIP route 10.1.2.0/24
- B、EIGRP route 10.1.2.0/24
- C、RIP route 10.1.0.0/16
- D、OSPF route 10.1.0.0/16
- E、RIP route 10.0.0.0/16
- F、OSPF route 10.1.2.0/24
正确答案:B,D,E
第4题：

Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）
- A、debug ip routing
- B、show running-config
- C、show ip route protocols
- D、show ip protocols
- E、show protocols al
正确答案:B,D
第5题：

单选题
Which command allows viewing of only OSPF routes?（）
A
show ip ospf route
B
show ip route protocol ospf
C
show route protocol ospf
D
show ospf table

正确答案： C
解析：暂无解析
第6题：

单选题
Which show command will display only the Type 5 LSAs in the OSPF topology database？（）
A
show ip ospf database external
B
show ip ospf database nssa - external
C
show ip route ospf
D
show ip ospf datab ase summary
E
show ip route

正确答案： A
解析：暂无解析
第7题：

单选题
A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
A
The router will use the static route.
B
The router will use the OSPF route.
C
The router will use the EIGRP route.
D
The router will load balance and use all three routes.

正确答案： B
解析：暂无解析
第8题：

单选题
Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?（） router ospf 1 redistribute ospf 2 external 2 route - map fred ! route - map fred permit 10 match ip address 1 set metric - type type - 1
A
No routes are redistributed because a route cannot be both E1 and E2.
B
Only OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.
C
Inside the OSPF 2 domain, any formerly E2 routes will become E1 routes.
D
Routes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.

正确答案： A
解析：暂无解析
第9题：

单选题
Which command will display only direct routes?（）
A
show route
B
show route inet 0 direct
C
show ip route direct
D
show ip route protocol direct

正确答案： D
解析：暂无解析
第10题：

多选题
An OSPF link can be in multiple states at any given moment （ie. Exstart， exchange， full）. Whichtwo IOS commands let you view the state of the link？（）
A
show ip ospf
B
show ip protocols
C
show ip ospf neighbor
D
show ip ospf interface

正确答案： B,A
解析：暂无解析
第11题：

多选题
Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）
A
debug ip routing
B
show running-config
C
show ip route protocols
D
show ip protocols
E
show protocols al

正确答案： A,D
解析：暂无解析
第12题：

单选题
Which IOS command would you use to find out which networks are routed by a particular OSPF process（）
A
show ip ospf
B
show ip route
C
show ip protocols
D
show ip ospf database
E
None of the other alternatives apply

正确答案： B
解析：暂无解析
第13题：

A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）
A. The router will use the static route.
B. The router will use the OSPF route.
C. The route will use the EIGRP route.
D. The router will load balance and use all three routes.

参考答案：A
第14题：

A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
- A、The router will use the static route.
- B、The router will use the OSPF route.
- C、The router will use the EIGRP route.
- D、The router will load balance and use all three routes.
正确答案:A
第15题：

Which two commands would you use to view OSPF routes?（）
- A、show ip route ospf
- B、show ospf routes
- C、show route protocol ospf
- D、show route
正确答案:C,D
第16题：

Which command allows viewing of only OSPF routes?（）
- A、show ip ospf route
- B、show ip route protocol ospf
- C、show route protocol ospf
- D、show ospf table
正确答案:C
第17题：

多选题
Which two commands would you use to view OSPF routes?（）
A
show ip route ospf
B
show ospf routes
C
show route protocol ospf
D
show route

正确答案： C,D
解析：暂无解析
第18题：

多选题
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
A
show ip route
B
show ip eigrp topology
C
show ip ospf topology
D
show ip eigrp topology 10.1.1.0/24

正确答案： A,D
解析：暂无解析
第19题：

单选题
Which IOS command would you use to find out which networks are routed by a particular OSPFprocess？（）
A
show ospf
B
show ip route
C
show ip protocols
D
show ip ospf database
E
None of the other alternatives apply

正确答案： E
解析：暂无解析
第20题：

单选题
Which command will display only direct routes?（）
A
show route
B
show route inet.0 direct
C
show ip route direct
D
show route protocol direct

正确答案： B
解析：暂无解析
第21题：

多选题
Which of the following can either directly or indirec tly identify all the interfaces for which both 1) OSPF has been enabled and 2) OSPF is not passive?（）
A
show ip ospf database
B
show ip ospf interface brief
C
show ip protocols
D
show ip route ospf
E
show ip ospf neighbors

正确答案： C,A
解析：暂无解析
第22题：

单选题
A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）
A
The router will use the static route.
B
The router will use the OSPF route.
C
The route will use the EIGRP route.
D
The router will load balance and use all three routes.

正确答案： C
解析：暂无解析
第23题：

多选题
An OSPF link can be in multiple states at any givenmoment(ie.Exstart,exchange,full). Which two IOS commands let you view the state of the link（）
A
show ip ospf
B
show ip protocols
C
show ip ospfneighbor
D
show ip ospfinterface

正确答案： C,D
解析：暂无解析
第24题：

单选题
查看OSPF路由器的邻居列表，应使用下列哪个命令？（）
A
show ip ospf neighbor
B
show ip ospf interface
C
show ip ospf
D
show ip route

正确答案： B
解析：暂无解析

多选题Which two commands would you use to view OSPF routes?（）Ashow ip route ospfBshow ospf routesCshow route protocol ospfDshow route

题目

相似考题

更多“多选题Which two commands would you use to view OSPF routes?（）Ashow ip route ospfBshow ospf routesCshow route protocol ospfDshow route”相关问题

相关内容