no-readvertise
resolve
preference
passive
第1题:
A. root
B. admin
C. juniper
D. user
第2题:
Which command will silently drop a matching packet?()
第3题:
Which word starts the command to remove configuration elements on a Junos device?()
第4题:
Which statement describes the behavior of a security policy?()
第5题:
Which process is responsible for the configuration of the router and all user commands on a Junos device?()
第6题:
Which account is used to access a Junos device in factory-default configuration?()
第7题:
Which word starts a command to add configuration on a Junos device?()
第8题:
rpd
chassisd
dcd
mgd
第9题:
resolve
indirect
next-hop
recursive
第10题:
The implicit default security policy permits all traffic.
Traffic destined to the device itself always requires a security policy.
Traffic destined to the device’s incoming interface does not require a security policy.
The factory-default configuration permits all traffic from all interfaces.
第11题:
incorrect DSL network redistribution
incorrect static host route configuration
incorrect static customer route configuration
incorrect default static route configuration on the end user
第12题:
root
admin
juniper
user
第13题:
A. The command is used to establish a static route.
B. The default administrative distance is used.
C. The command is used to configure the default route.
D. The subnet mask for the source address is 255.255.255.0
E. The command is used to establish a stub network
第14题:
Which two statements are correct when you use the reject parameter as the next-hop value for a static route?()
第15题:
You can successfully ping a Bridged 1483 customer's workstation from the local ERX. However, a remote ERX router in your network cannot ping that same device. What could be causing this problem?()
第16题:
Which configuration parameter on a Junos device alters the default next-hop resolution behavior of a static route?()
第17题:
You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?()
第18题:
You have been asked to create a static route with a next hop that is not directly connected to the router.Which configuration parameter enables the static route to accomplish this scenario?()
第19题:
The packet is dropped and the packet's source is marked with the no-readvertise parameter.
The system sends the packet back to the source.
The packet is dropped from the network.
The system sends an ICMP message back to the source of the packet.
第20题:
set routing-options static route 10.1.1.1/32 no-retain
set routing-options static route 10.1.1.1/32 discard
set routing-options static route 10.1.1.1/32 reject
set routing-options static route 10.1.1.1/32 passive
第21题:
undo
remove
delete
unset
第22题:
user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1
user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1
user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1
user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1
第23题:
get
set
put
show