as an outbound filter on interface fxp0
as an outbound filter on interface lo0
as an inbound filter on interface fxp0
as an inbound filter on interface lo0
第1题:
You have a firewall filter containing two terms applied in an inbound direction on a customer interface.You would like this filter to protect your network from a spoofed denial of service attack. Which match criterion should be configured ito identify unwanted packets?()
A. from source-port
B. from source-address
C. from destination-address
D. from destination-port
第2题:
You have a firewall filter containing two terms applied in an inbound direction on a customer interface.You would like this filter to protect your network from a spoofed denial of service attack. Which match criterion should be configured ito identify unwanted packets?()
第3题:
You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have decided to use a firewall filter.How should you apply the firewall filter?()
第4题:
某网络连接形如:HostA----GE0/0--MSR-1--S1/0---------S1/0--MSR-2--GE0/0----HostB 两台MSR 路由器MSR1、MSR2 通过各自的S1/0 接口背靠背互连,各自的GigabitEthernet0/0 接口分别 连接客户端主机HostA 和HostB。通过配置IP 地址和路由目前网络中HostA 可以和HostB 实现互通。 如今在MSR-2 上增加了如下配置: firewall enable acl number 3000 rule 0 deny tcp destination-port eq telnet interface Serial1/0 link-protocol ppp ip address 1.1.1.2 255.255.255.252 firewall packet-filter 3000 inbound firewall packet-filter 3000 outbound interface GigabitEthernet0/0 ip address 10.1.1.1 255.255.255.0 那么如下哪些说法是正确的?()
第5题:
You have a firewall filter applied in an inbound direction on a customer interface. You would like this filter to protect your network from a spoofed denial of service attack. Which action should be configured to accomplish your goal?()
第6题:
You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface. You have decided to use a firewall filter. How should you apply the firewall filter?()
第7题:
A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect? ()
第8题:
from source-port
from source-address
from destination-address
from destination-port
第9题:
then reject
then discard
then next filter
then silent-drop
第10题:
as an outbound filter on interface fxp0
as an outbound filter on interface lo0
as an inbound filter on interface fxp0
as an inbound filter on interface lo0
第11题:
as an outbound filter on interface fxp0
as an outbound filter on interface lo0
as an inbound filter on interface fxp0
as an inbound filter on interface lo0
第12题:
rollback 2
rollback 1
rollback 0
rollback 3
第13题:
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
第14题:
You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have decided to use a firewall filter. How should you apply the firewall filter?()
第15题:
You need to control SSH. HTTP, and Telnet access to an MX240 router through any interface. You have decided to use a firewall filter. How should you apply the firewall filter?()
第16题:
You've configured an interface with an IP address and commited the change. You then commited a change that added an exception in a firewall filter to allow this network through the filter. You realize that this work was done on the wrong router. How do you undo all these changes?()
第17题:
You have a firewall filter containing two terms applied in an inbound direction on a customer interface. You would like this filter to protect your network from a spoofed denial of service attack. What match criterion should be used in the first term of the filter?()
第18题:
You configured an interface with an IP address and committed the change. You then committed a change that added an exception in a firewall filter to allow this network through the filter. You realize that this work was done on the wrong router. How do you undo all these changes?()
第19题:
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server is configured as a network address translation (NAT) router. The server has two network adapters and provides Internet access for the network.You need to prevent traffic on port 21 from being sent to the Internet. All other outbound traffic must be allowed.What should you do?()
第20题:
Source TCP port
Source IP address
Destination TCP port
Destination IP address
第21题:
as an outbound filter on interface fxp0
as an outbound filter on interface lo0
as an inbound filter on interface fxp0
as an inbound filter on interface lo0
第22题:
On the network adapter that is connected to the LAN, enable TCP/IP filtering.
On the network adapter that is connected to the Internet, enable TCP/IP filtering.
From the Routing and Remote Access snap-in, open the properties of the interface connected to the Internet, select the Services and Ports tab, and define a new service.
From the Routing and Remote Access snap-in, open the properties of the interface connected to the Internet, select the NAT/Basic Firewall tab, and define a new static packet filter.
第23题:
as an outbound filter on interface fxp0
as an outbound filter on interface lo0
as an inbound filter on interface fxp0
as an inbound filter on interface lo0
第24题:
rollback 2
rollback 1
rollback 0
rollback 3