单选题A technician has added memory to a laser printer. To allow the printer driver software to use the additional memory， the amount of memory should be modified in：（）A the Device Settings tab in Printer Properties.B Device Manager by clicking on the printe

题目
单选题
A technician has added memory to a laser printer. To allow the printer driver software to use the additional memory， the amount of memory should be modified in：（）
A

the Device Settings tab in Printer Properties.

B

Device Manager by clicking on the printer’s driver and selecting Parameters.

C

Device Manager by selecting Upgrade Driver.

D

the Color Management tab in Printer Properties.

相似考题

1.You want to connect your Windows 2000 Professional computer to a new color laser printer. The printer is Plug and Play compliant. The printer is included on the current Hardware Compatibility List (HCL).You are a member of the Sales organizational unit (OU). You want to share the printer with other users in the Sales Organizational Unit.You plug the printer into the LPT port on the back of the computer. You then attempt to install the 32-bit application printer software that came with the printer. During the installation you receive an error message as shown in the exhibit.What should you do before you share the printer to other users in the Sales OU?A．Change the LPT port settings to enable legacy Plug and Play detection on your computer.B．Change the LPT port setting to bidirectional in the BIOS on your computer. Then reinstall the printer software.C．Connect the printer to another computer in the Sales Organizational Unit. Then install the device drivers for the printer.D．Obtain and install WDM-compliant device drivers and printing software for the printer.

2.Which of the following does an out－of－memory error indicate on a printer?()A. A faulty memory module in the printer.B. A postscript print job has been sent to the printer.C. A large print job has been sent to the printer.D. The printer firmware needs to be updated.

3.You create two shared printers on a Windows 2000 Server computer in Ezonexam.com Ezonexam. One printer is shared as Admin, and the other printer is shared as Executive. Both printers are connected to the same print device. You set the priority of the Admin printer to 90 and the priority of the Executive printer to 50.You want all users at the Ezonexam network to be able to send print jobs to either printer. However, you do not want the Executive printer to appear in the browse list when employees other than executives and administrative assistants create a new printer connection on their client computers.What should you do?A．Change the priority of the Executive printer to 99. Change the priority of the Admin printer to 10.B．Change the share name of the Executive printer to Executive$. Manually reconfigure client computers that are already connected to the Executive printer.C．Deny the Everyone group permission to access the Executive printer. Allow access to the users who are allowed to include the printer in their browse lists.D．Install separate device drivers for the Executive printer. Configure NTFS permissions on the device driver files to allow access only to the System account and to users who are allowed to include the printer in their browse lists.

4.You are the administrator of Ezonexam.com's network.You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:"Specified Port cannot be added. The port already exists."You want to be able to use the new TCP/IP printer.What should you do?A．Modify the properties of the existing printer port to use the new print device.B．Change the LPT port setting to bidirectional in the BIOS on your computer.C．Change the LPT port setting to enable legacy Plug and Play detection on your computer.D．Obtain and install the WDM-compliant device drivers and printing software for the printer.

更多“单选题A technician has added memory to a laser printer. To allow the printer driver software to use the additional memory， the amount of memory should be modified in：（）A the Device Settings tab in Printer Properties.B Device Manager by clicking on the printe”相关问题

  • 第1题：

    You are the network administrator for Ezonexam.com. You configure a shared printer on a Windows 2000 Server computer. The printer connects to a Hewlett Packard JetDirect print device that uses DLC. This print device is on the same network segment as the server.

    Six months later, you relocate the print device to a different network segment. Users report that they are able to send print jobs to the printer but that their print jobs no longer print.

    You need to ensure that the printer and the print device are working properly. What should you do?

    A．Configure the JetDirect print device to use DHCP.

    B．Uninstall and reinstall the DLC protocol from the server.

    C．Configure the printer and the JetDirect print device to use the LPR printing protocol.

    D．Delete the printer. Re-create the printer by using DLC to connect to the JetDirect print device.


    正确答案：D
    解析：Explanation: In this scenario the DLC protocol has to be configured on the Printer. The print device was in use on a different network segment, but the computer that serves as a print server must be on the same segment as the printer device because DLC is not routable.

    Incorrect answers:
    A: This print device uses DLC, not TCP/IP therefore it does not require DHCP to provide it with an IP address.

    B: The server will no longer be functioning as a print server, therefore we should not reinstall the DLC protocol on the server.

    C: The LPR printing protocol is used in UNIX environments.

  • 第2题：

    You are the network administrator for All network servers run Windows Server 2003. A server named PrintTK1 has a print device directly connected to the parallel port. The print device is shared for use by all users. Peter is the IT manager. Peter reports that his documents are often printed after documents submitted by other users. You need to ensure that Peter's documents take precedence over documents submitted for printing by other users. However, if a document is already printing, the printing must not be interrupted. What should you do?（）

    • A、Configure the printer permissions to assign the Allow - Take Ownership permission to Peter. Restart the Print Spooler service on PrintTK1.
    • B、Make Peter's user account the owner of the printer. Restart the Print Spooler service on PrintTK1.
    • C、Create a new printer on PrintTK1 and configure it to print to the print device. In the Advanced tab of the new printer properties, select the Print directly to the printer option. Configure Peter's computer to print to the new printer.
    • D、Create a new printer PrintTK1 and configure it to print to the print device. Modify the priority of the new printer. Configure Peter's computer to print to the new printer.

    正确答案:D

  • 第3题：

    You attempt to install a 32-bit application printer software that came with a new laser printer. During the installation， you receive the error message "failed to load WINPRINT.DLL. Specified module could not be found". What should you do get the printer functioning properly？（）

    • A、Change the LPT port settings to enable legacy plug and play detection. 
    • B、At your computer change the LPT port settings to use bi-directional printing then restart the print server. 
    • C、Obtain and install the WDM-compliant device drivers and printing software for the printer. 
    • D、Reinstall the operating system.

    正确答案:C

  • 第4题：

    Which of the following does an out-of-memory error indicate on a printer?（）

    • A、A faulty memory module in the printer.
    • B、A postscript print job has been sent to the printer.
    • C、A large print job has been sent to the printer.
    • D、The printer firmware needs to be updated.

    正确答案:C

  • 第5题：

    You are the network administrator for your company. The network consists of a single Active Directory domain. All network servers run Windows Server 2003.A server named Print1 has a print device directly connected to the parallel port. The print device is shared for use by all users. Peter is the IT manager. Peter reports that his documents are often printed after documents submitted by other users. You need to ensure that Peter's documents take precedence over documents submitted for printing by other users. However, if a document is already printing, the printing must not be interrupted. What should you do? （）

    • A、Configure the printer permissions to assign the Allow - Take Ownership permission to Peter. Restart the Print Spooler service on Print1.
    • B、Make Peter's user account the owner of the printer. Restart the Print Spooler service on Print1.
    • C、Create a new printer on Print1 and configure it to print to the print device. In the Advanced tab of the new printer properties, select the Print directly to the printer option. Configure Peter's computer to print to the new printer.
    • D、Create a new printer on Print1 and configure it to print to the print device. Modify the priority of the new printer. Configure Peter's computer to print to the new printer.

    正确答案:D

  • 第6题：

    Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 has a shared printer named Printer1. Users report that when they attempt to connect to Printer1 they receive the following error message: “The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.” On Server1, you can print a test page on Printer1. You need to ensure that when users connect to Printer1, the correct printer driver is installed. What should you do? （）

    • A、Configure the printer to use the LPT1 local port.
    • B、Configure Advanced settings in Printing Preferences.
    • C、Add an additional driver from the properties of Printer1.
    • D、Add the Allow Manage Printers permission to CREATOR OWNER.

    正确答案:C

  • 第7题：

    单选题
    A user installs a laser jet printer on a Windows XP desktop. The user states that Windows XPgeneric printer drivers were used. When the user prints a document, the pages are printing out with random symbols, letters, and numbers. Which of the following should the technician do?（）
    A

    Download manufacturer printer drivers

    B

    Restart the printer spooler

    C

    Check for Microsoft Windows updates

    D

    Check Device Manager


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    A technician has added memory to a laser printer. To allow the printer driver software to use the additional memory， the amount of memory should be modified in：（）
    A

    the Device Settings tab in Printer Properties.

    B

    Device Manager by clicking on the printer’s driver and selecting Parameters.

    C

    Device Manager by selecting Upgrade Driver.

    D

    the Color Management tab in Printer Properties.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    You are the administrator for Company's network.  Your account is configured to use roaming profiles and your username is Johan1. The profile is stored on a Windows 2000 Server computer named CompanyA. You log on to your Windows 2000 Professional computer and install a shared color laser printer. The color laser printer is shared from a computer named CompanyB. The next day when you return and log on to your computer you discover that when you attempt to print a document to the shared color laser printer, the printer is not included in the list of available printers. You want the printer connection to be available to you from any computer on the network.  What should you do? （）
    A

    On CompanyA configure a local user account for Johan1.

    B

    On CompanyA change the file ntuser.man to ntuser.dat for Johan1

    C

    Install an updated printer driver for the print device on the user’s computer.

    D

    Grant Johan1 the Manage Printers permission for the shared color laser printer.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    You are the network administrator for All network servers run Windows Server 2003. A server named PrintTK1 has a print device directly connected to the parallel port. The print device is shared for use by all users. Peter is the IT manager. Peter reports that his documents are often printed after documents submitted by other users. You need to ensure that Peter's documents take precedence over documents submitted for printing by other users. However, if a document is already printing, the printing must not be interrupted. What should you do?（）
    A

    Configure the printer permissions to assign the Allow - Take Ownership permission to Peter. Restart the Print Spooler service on PrintTK1.

    B

    Make Peter's user account the owner of the printer. Restart the Print Spooler service on PrintTK1.

    C

    Create a new printer on PrintTK1 and configure it to print to the print device. In the Advanced tab of the new printer properties, select the Print directly to the printer option. Configure Peter's computer to print to the new printer.

    D

    Create a new printer PrintTK1 and configure it to print to the print device. Modify the priority of the new printer. Configure Peter's computer to print to the new printer.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    You attempt to install a 32-bit application printer software that came with a new laser printer. During the installation， you receive the error message "failed to load WINPRINT.DLL. Specified module could not be found". What should you do get the printer functioning properly？（）
    A

    Change the LPT port settings to enable legacy plug and play detection. 

    B

    At your computer change the LPT port settings to use bi-directional printing then restart the print server. 

    C

    Obtain and install the WDM-compliant device drivers and printing software for the printer. 

    D

    Reinstall the operating system.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    A technician is performing scheduled preventive maintenance on a laser printer. Which of the following should the technician clean or replace？ （）
    A

    fuser

    B

    ozone filter

    C

    transfer corona

    D

    primary corona


    正确答案： C
    解析： 暂无解析

  • 第13题：

    A technician has added memory to a laser printer. To allow the printer driver software to use the additional memory， the amount of memory should be modified in：（）

    • A、the Device Settings tab in Printer Properties.
    • B、Device Manager by clicking on the printer’s driver and selecting Parameters.
    • C、Device Manager by selecting Upgrade Driver.
    • D、the Color Management tab in Printer Properties.

    正确答案:A

  • 第14题：

    A user installs a laser jet printer on a Windows XP desktop. The user states that Windows XPgeneric printer drivers were used. When the user prints a document, the pages are printing out with random symbols, letters, and numbers. Which of the following should the technician do?（）

    • A、Download manufacturer printer drivers
    • B、Restart the printer spooler
    • C、Check for Microsoft Windows updates
    • D、Check Device Manager

    正确答案:A

  • 第15题：

    A printer takes a long time to print high-end graphics. Which of the following would be the FIRST action to take？ （）

    • A、Replace the toner cartridge.
    • B、Recommend the use of smaller graphics.
    • C、Check the amount of memory installed.
    • D、Recommend connecting fewer users to the printer.

    正确答案:C

  • 第16题：

    One of Company.com’s Linux partitions is experiencing excessive paging. They want to provide more memory to the partition to resolve this problem. What is the best method to add the memory？（）

    • A、Add an additional virtual swap device to the partition.
    • B、Use DLPAR to dynamically add the required memory to the partition.
    • C、Shut down the partition and redefine its profile with additional memory.
    • D、Change Partition Load Manager parameters to provide the partition with additional memory shares.

    正确答案:C

  • 第17题：

    You are the administrator of your company’s network. A user named Stephen in the graphics department logs on to his Windows 2000 Professional computer. He installs a shared color laser printer. The color laser printer is connected to a computer named Server1. The next day Stephen returns and logs on to a Windows NT Workstation 4.0 computer. Stephan reports that when he attempts to print a document to the shared color laser printer， the printer is not included in the list of available printers. You want to allow Stephen to send print jobs to the shared color laser printer from any computer on the network. What should you do？（）

    • A、Configure a roaming user profile for Stephen’s user account.
    • B、Configure the server properties of the printer system folder to connect to the shared printer.
    • C、Install the printer driver for the print device on the Windows NT workstation computer.
    • D、Upgrade the Windows NT Workstation computer to Windows 2000 Professional， and then import the profile settings for Stephen’s user account.

    正确答案:A

  • 第18题：

    单选题
    A printer takes a long time to print high-end graphics. Which of the following would be the FIRST action to take？ （）
    A

    Replace the toner cartridge.

    B

    Recommend the use of smaller graphics.

    C

    Check the amount of memory installed.

    D

    Recommend connecting fewer users to the printer.


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 has a shared printer named Printer1. Users report that when they attempt to connect to Printer1 they receive the following error message: “The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.” On Server1, you can print a test page on Printer1. You need to ensure that when users connect to Printer1, the correct printer driver is installed. What should you do? （）
    A

    Configure the printer to use the LPT1 local port.

    B

    Configure Advanced settings in Printing Preferences.

    C

    Add an additional driver from the properties of Printer1.

    D

    Add the Allow Manage Printers permission to CREATOR OWNER.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    One of Company.com’s Linux partitions is experiencing excessive paging. They want to provide more memory to the partition to resolve this problem. What is the best method to add the memory？（）
    A

    Add an additional virtual swap device to the partition.

    B

    Use DLPAR to dynamically add the required memory to the partition.

    C

    Shut down the partition and redefine its profile with additional memory.

    D

    Change Partition Load Manager parameters to provide the partition with additional memory shares.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following does an out-of-memory error indicate on a printer?（）
    A

    A faulty memory module in the printer.

    B

    A postscript print job has been sent to the printer.

    C

    A large print job has been sent to the printer.

    D

    The printer firmware needs to be updated.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Your network contains an Active Directory domain. The domain contains two print servers named Server1 and Server2 that run Windows Server 2008 R2.Server1 has a printer named Printer1. Server2 has a printer named Printer2. Both printers use the same driver.The print device for Printer1 fails.You need to ensure that the print jobs in the Printer1 queue are printed. What should you do?（）
    A

    Modify the Ports settings of Printer1.

    B

    Modify the Sharing settings of Printer1.

    C

    Run the Printer Migration tool.

    D

    Run the Remove-Job and Copy-Item cmdlets.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    You are the administrator of your company’s network. A user named Stephen in the graphics department logs on to his Windows 2000 Professional computer. He installs a shared color laser printer. The color laser printer is connected to a computer named Server1. The next day Stephen returns and logs on to a Windows NT Workstation 4.0 computer. Stephan reports that when he attempts to print a document to the shared color laser printer， the printer is not included in the list of available printers. You want to allow Stephen to send print jobs to the shared color laser printer from any computer on the network. What should you do？（）
    A

    Configure a roaming user profile for Stephen’s user account.

    B

    Configure the server properties of the printer system folder to connect to the shared printer.

    C

    Install the printer driver for the print device on the Windows NT workstation computer.

    D

    Upgrade the Windows NT Workstation computer to Windows 2000 Professional， and then import the profile settings for Stephen’s user account.


    正确答案： D
    解析： A user profile, a roaming user profile for example, contains folders and data that stores the user's current desktop environment, application settings, and personal data. It also contains all the network connections that are established when a user logs on to a computer. This includes network printers. By configuring a roaming user profile Stephen would be able to connect to the laser color printer from every computer in the network.

  • 第24题：

    单选题
    You are the network administrator for your company. The network consists of a single Active Directory domain. All network servers run Windows Server 2003.A server named Print1 has a print device directly connected to the parallel port. The print device is shared for use by all users. Peter is the IT manager. Peter reports that his documents are often printed after documents submitted by other users. You need to ensure that Peter's documents take precedence over documents submitted for printing by other users. However, if a document is already printing, the printing must not be interrupted. What should you do? （）
    A

    Configure the printer permissions to assign the Allow - Take Ownership permission to Peter. Restart the Print Spooler service on Print1.

    B

    Make Peter's user account the owner of the printer. Restart the Print Spooler service on Print1.

    C

    Create a new printer on Print1 and configure it to print to the print device. In the Advanced tab of the new printer properties, select the Print directly to the printer option. Configure Peter's computer to print to the new printer.

    D

    Create a new printer on Print1 and configure it to print to the print device. Modify the priority of the new printer. Configure Peter's computer to print to the new printer.


    正确答案： A
    解析： 暂无解析

相关内容