单选题A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would

题目
单选题
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）
A

The motherboard was damaged and needs replacing.

B

The floppy drive was not reconnected.

C

A configuration disk was left in the floppy drive.

D

The ribbon cable has been installed incorrectly.

相似考题

1.A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager

2. You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive isconnected to a RAID controller. During the installation, you discover that the Windows 7 installation mediadoes not include the files required to install the RAID controller. You need ensure that you can installWindows 7 on the hard disk drive.  What should you do?（）A、Insert the Windows installation media and press F8 during the computer s power-on self test (POST).B、Insert the Windows installation media and press F6 during the computer s power-on self test (POST).C、Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.D、Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).

3.An internal user has deleted a file named， pagefile.sys and is concerned this deletion may affect the computer. The user should be instructed to：（）A、reboot the computer because Windows automatically generates a new page file.B、add a new hard drive， format the drive and install Windows.C、back up all data， reboot the computer and notify a desktop technician.D、reformat the hard drive and reinstall Windows.

4.A technician needs to replace a computer’s hard drive. Which of the following should thetechnician do FIRST?()A. Remove network connectionsB. Remove the RAMC. Self ground on the computer caseD. Disconnect power to PC

参考答案和解析
正确答案： D
解析： 暂无解析
更多“单选题A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would”相关问题

  • 第1题：

    After setting up a new computer, a user states that the mouse and keyboard will not work. Whichof the following is the MOST likely reason?（）

    • A、The network cable is disconnected
    • B、The PS/2 connectors are switched
    • C、The USB connectors are switched
    • D、The hard drive is unplugged

    正确答案:B

  • 第2题：

    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

    • A、Add another hard drive and use that available space.
    • B、Run FDISK.
    • C、Use the Disk Management tool.
    • D、Back up all important data to an external drive then reformat the hard drive.

    正确答案:C

  • 第3题：

    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

    • A、Disk Management
    • B、Services and Applications
    • C、Removable Storage
    • D、Device Manager

    正确答案:A

  • 第4题：

    An end user reports that their computer is making noise constantly. The technician notes that the hard drive activity light is on frequently. The technician finds plenty of free space on the drive.Which of the following BEST explains why the drive light is continuously active?（）

    • A、The system has a fragmented hard drive.
    • B、The drive interface needs to be changed.
    • C、The user has too many documents on the hard drive.
    • D、The system page file has an issue.

    正确答案:A

  • 第5题：

    A technician needs to replace a computer’s hard drive. Which of the following should thetechnician do FIRST?（）

    • A、Remove network connections
    • B、Remove the RAM
    • C、Self ground on the computer case
    • D、Disconnect power to PC

    正确答案:D

  • 第6题：

    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）

    • A、The hard drive is not formatted.
    • B、The BIOS is corrupted.
    • C、The motherboard has faulty capacitors.
    • D、The drive cable is backwards

    正确答案:D

  • 第7题：

    单选题
    A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）
    A

    The power supply has failed.

    B

    The drive cable is connected backwards.

    C

    The floppy drive has failed.

    D

    The proper drivers have not been loaded.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    After removing several obsolete programs from a PC, a user is experiencing slower than usuallyprocessing times. Which of the following would be the BEST way to speed up the processing? （）
    A

    Use an external hard drive.

    B

    Defrag the hard drive.

    C

    Add more RAM to the computer.

    D

    Install a larger hard drive.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive isconnected to a RAID controller. During the installation, you discover that the Windows 7 installation mediadoes not include the files required to install the RAID controller. You need ensure that you can installWindows 7 on the hard disk drive.  What should you do?（）
    A

    Insert the Windows installation media and press F8 during the computer s power-on self test (POST).

    B

    Insert the Windows installation media and press F6 during the computer s power-on self test (POST).

    C

    Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.

    D

    Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）
    A

    The hard drive is not formatted.

    B

    The BIOS is corrupted.

    C

    The motherboard has faulty capacitors.

    D

    The drive cable is backwards


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）
    A

    Add another hard drive and use that available space.

    B

    Run FDISK.

    C

    Use the Disk Management tool.

    D

    Back up all important data to an external drive then reformat the hard drive.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    After setting up a new computer, a user states that the mouse and keyboard will not work. Whichof the following is the MOST likely reason?（）
    A

    The network cable is disconnected

    B

    The PS/2 connectors are switched

    C

    The USB connectors are switched

    D

    The hard drive is unplugged


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

    • A、The second hard drive has not been formatted for NTFS.
    • B、The jumpers on both drives are set to the cable select position.
    • C、The jumper on the first drive is set to master and the second is set to slave.
    • D、The jumpers on both drives are set to the master position.

    正确答案:D

  • 第14题：

    A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）

    • A、The motherboard was damaged and needs replacing.
    • B、The floppy drive was not reconnected.
    • C、A configuration disk was left in the floppy drive.
    • D、The ribbon cable has been installed incorrectly.

    正确答案:D

  • 第15题：

    A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）

    • A、The power supply has failed.
    • B、The drive cable is connected backwards.
    • C、The floppy drive has failed.
    • D、The proper drivers have not been loaded.

    正确答案:B

  • 第16题：

    A user reports that the computer’s hard drive is constantly running and the hard drive light is constantly flashing. Which of the following tools would be used to resolve this issue without losing data?（）

    • A、chkdsk
    • B、fdisk
    • C、defrag
    • D、format

    正确答案:C

  • 第17题：

    You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）

    • A、Modify the computer's BIOS so that it automatically detects whether drive D is connected.
    • B、Modify the computer's BIOS so that drive C is first in the computer's boot order. 
    • C、Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect.
    • D、Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: "Microsoft Windows 98" /fastdetect.

    正确答案:C

  • 第18题：

    After removing several obsolete programs from a PC, a user is experiencing slower than usuallyprocessing times. Which of the following would be the BEST way to speed up the processing? （）

    • A、Use an external hard drive.
    • B、Defrag the hard drive.
    • C、Add more RAM to the computer.
    • D、Install a larger hard drive.

    正确答案:B

  • 第19题：

    单选题
    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）
    A

    Disk Management

    B

    Services and Applications

    C

    Removable Storage

    D

    Device Manager


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    A user reports that the computer’s hard drive is constantly running and the hard drive light is constantly flashing. Which of the following tools would be used to resolve this issue without losing data?（）
    A

    chkdsk

    B

    fdisk

    C

    defrag

    D

    format


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）
    A

    The second hard drive has not been formatted for NTFS.

    B

    The jumpers on both drives are set to the cable select position.

    C

    The jumper on the first drive is set to master and the second is set to slave.

    D

    The jumpers on both drives are set to the master position.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    An internal user has deleted a file named， pagefile.sys and is concerned this deletion may affect the computer. The user should be instructed to：（）
    A

    reboot the computer because Windows automatically generates a new page file.

    B

    add a new hard drive， format the drive and install Windows.

    C

    back up all data， reboot the computer and notify a desktop technician.

    D

    reformat the hard drive and reinstall Windows.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）
    A

    Modify the computer's BIOS so that it automatically detects whether drive D is connected.

    B

    Modify the computer's BIOS so that drive C is first in the computer's boot order. 

    C

    Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)=Microsoft Windows XP Professional /fastdetect.

    D

    Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: Microsoft Windows 98 /fastdetect.


    正确答案： B
    解析： 暂无解析

相关内容