单选题Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）A The Virtual SCSI disks are defined as lo

题目
单选题
Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）
A

The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 

B

The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 

C

The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 

D

The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.

相似考题

1.Companycom has a p5 595 with no DVD configured on this server. How can they install the Virtual IO Server code?（）A、From the HMCB、From a NFS mountC、From a FTP serverD、From any CD or DVD drive on another server

2.What are the storage component areas utilized in the IBM Storwize V7000？（）A、Volumes， Extents， and LUNsB、Volumes， Storage Pools， and Managed DisksC、Virtual Disk Groups， Managed Disks， and LUNsD、Virtual Disks， Manage Disk Groups， and Managed Disks

3.Companycom is implementing a pair of Virtual IO Servers to service four LPARs. If each operating system image requires 15GB of disk space, what is the minimum amount of SCSI resource necessary?（）A、Two SCSI paths and two 73GB SCSI disksB、Two SCSI paths and two 36GB SCSI disksC、Four SCSI paths and four 73GB SCSI disksD、Two dual port SCSI RAID adapters with two 73GB SCSI disks

4. Companycom is installing a Virtual IO Server to reduce the number of fibre channel adapters needed for each partition. The customer wants to use disk based copy functions to replicate the data on the LUNs. How can this be accomplished?（）A、Create LVM mirrors between LUNsB、MPIO is necessary as the device driverC、Use separate fibre adapters in the Virtual IO Server for each LUND、Virtual IO Server is a disk subsystem and must control the LUNs behind it

更多“单选题Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）A The Virtual SCSI disks are defined as lo”相关问题

  • 第1题：

    How can virtual processors be differentiated from dedicated processors from a physical processor viewpoint?（）

    • A、Dedicated processors are fractions of whole processors that are dedicated to a single partition. 
    • B、Virtual processors are the whole number of concurrent operations that the operating system can use. 
    • C、Virtual processors and not dedicated processors are processors used in Virtual IO Server partitions. 
    • D、Virtual processors and dedicated processors are interchangeable concepts, both are whole physical processors used in virtual and dedicated LPARs.

    正确答案:B

  • 第2题：

    Which of the following would be the FIRST step to configure a Virtual I/O Server（VIOS）？（）

    • A、Boot the HMC with the VIOS media.
    • B、Assign SAN-attached disks to the database partitions.
    • C、Create logical volumes for the VIOS on rootvg disks.
    • D、Identify the location of the internal SCSI disks for the VIOS.

    正确答案:D

  • 第3题：

    What type of configuration can provide the best availability in a Virtual IO Server environment?（）

    • A、Provide multiple paths to all resources through 2 or more Virtual IO Servers
    • B、Mirror all disk resources on the Virtual IO Server to present to the client LPAR
    • C、Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
    • D、Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）

    正确答案:A

  • 第4题：

    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）

    • A、Reallocate the Virtual IO Server disks to the user LPAR
    • B、Create a stripe-group within the Virtual IO Server to protect against disk failure
    • C、Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
    • D、Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers

    正确答案:D

  • 第5题：

    You are designing a Windows Server 2008 R2 Hyper-V environment. You need to be able to dynamically add new storage to Windows virtual machines （VMs）. What should you do？（）

    • A、Install Hyper-V Integration Services on the VMs
    • B、Use dynamically expanding virtual hard disks （VHDs）
    • C、Install the VMs in Cluster Shared Volumes （CSVs）
    • D、Use fixed virtual hard disks （VHDs）

    正确答案:A

  • 第6题：

    Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）

    • A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 
    • B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 
    • C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 
    • D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.

    正确答案:A

  • 第7题：

    单选题
    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）
    A

    Reallocate the Virtual IO Server disks to the user LPAR

    B

    Create a stripe-group within the Virtual IO Server to protect against disk failure

    C

    Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk

    D

    Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?（）
    A

    Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.

    B

    Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.

    C

    Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.

    D

    Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator wants to record details of all logical volumes mapped as virtual disks on a VIO server partition and the associated virtual target devices and mappings.  Which IOS command can the administrator use to achieve this？（）
    A

     lssp -detail

    B

     lsvdev -s vtd -c lv

    C

     lsmap -type lv -all

    D

     lsdev -Cs virtual -t lv


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    What type of configuration can provide the best availability in a Virtual IO Server environment?（）
    A

    Provide multiple paths to all resources through 2 or more Virtual IO Servers

    B

    Mirror all disk resources on the Virtual IO Server to present to the client LPAR

    C

    Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server

    D

    Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    You create a virtual machine （VM） on a Windows Server 2008 R2 Hyper-V server. The VM has a single VHD file that is connected to an IDE controller. You need to add five new virtual disks to the VM. You must minimize the amount of virtual hardware. What should you do？（）
    A

    Add the virtual disks to IDE Controller 0.

    B

    Add the virtual disks to an existing SCSI controller.

    C

    Remove the virtual DVD drive， and add the virtual disks to IDE Controller1.

    D

    Add five SCSI controllers to the VM， and add one virtual disk to each SCSI controller.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）
    A

    Create two virtual adapters on the client， each one from a separate Virtual IO Server

    B

    Enable dead gateway detection on the client so that the network traffic can be rerouted

    C

    Have a spare network card on standby in the client in case the Virtual IO Server goes down

    D

    Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two  separate Virtual IO Servers


    正确答案： A
    解析： 暂无解析

  • 第13题：

    A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?（）

    • A、Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.
    • B、Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.
    • C、Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.
    • D、Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.

    正确答案:D

  • 第14题：

    Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）

    • A、Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.
    • B、Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.
    • C、Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.
    • D、Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.

    正确答案:C

  • 第15题：

    An administrator wants to record details of all logical volumes mapped as virtual disks on a VIO server partition and the associated virtual target devices and mappings.  Which IOS command can the administrator use to achieve this？（）

    • A、 lssp -detail
    • B、 lsvdev -s vtd -c lv
    • C、 lsmap -type lv -all
    • D、 lsdev -Cs virtual -t lv

    正确答案:C

  • 第16题：

    You create a virtual machine （VM） on a Windows Server 2008 R2 Hyper-V server. The VM has a single VHD file that is connected to an IDE controller. You need to add five new virtual disks to the VM. You must minimize the amount of virtual hardware. What should you do？（）

    • A、Add the virtual disks to IDE Controller 0.
    • B、Add the virtual disks to an existing SCSI controller.
    • C、Remove the virtual DVD drive， and add the virtual disks to IDE Controller1.
    • D、Add five SCSI controllers to the VM， and add one virtual disk to each SCSI controller.

    正确答案:B

  • 第17题：

    You have a two-node Hyper-V failover cluster that uses SAN storage. You are designing storage for a new virtualization environment by using Windows Server 2008 R2.  You plan to deploy five virtual machines （VMs） per logical unit number （LUN）. You need to be able to perform a live migration of a single VM while the other VMs continue to run on the host server.  What should you do？（）

    • A、Use Cluster Shared Volumes （CSVs）
    • B、Use fixed disks on the SAN storage
    • C、Boot the virtual machines from iSCSI LUNs
    • D、Use dynamically expanding disks on an iSCSI LUN

    正确答案:A

  • 第18题：

    单选题
    Companycom is implementing a pair of Virtual IO Servers to service four LPARs. If each operating system image requires 15GB of disk space, what is the minimum amount of SCSI resource necessary?（）
    A

    Two SCSI paths and two 73GB SCSI disks

    B

    Two SCSI paths and two 36GB SCSI disks

    C

    Four SCSI paths and four 73GB SCSI disks

    D

    Two dual port SCSI RAID adapters with two 73GB SCSI disks


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    Companycom is installing a Virtual IO Server to reduce the number of fibre channel adapters needed for each partition. The customer wants to use disk based copy functions to replicate the data on the LUNs. How can this be accomplished?（）
    A

    Create LVM mirrors between LUNs

    B

    MPIO is necessary as the device driver

    C

    Use separate fibre adapters in the Virtual IO Server for each LUN

    D

    Virtual IO Server is a disk subsystem and must control the LUNs behind it


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）
    A

    Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.

    B

    Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.

    C

    Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.

    D

    Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    You are designing a Windows Server 2008 R2 Hyper-V environment. You need to be able to dynamically assign new storage to Windows virtual machines （VMs）.  What should you do？（）
    A

    Use fixed virtual hard disks （VHDs）

    B

    Install Hyper-V Integration Services on the VMs

    C

    Install the VMs in Cluster Shared Volumes （CSVs）

    D

    Use dynamically expanding virtual hard disks （VHDs）


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    Which of the following would be the FIRST step to configure a Virtual I/O Server（VIOS）？（）
    A

    Boot the HMC with the VIOS media.

    B

    Assign SAN-attached disks to the database partitions.

    C

    Create logical volumes for the VIOS on rootvg disks.

    D

    Identify the location of the internal SCSI disks for the VIOS.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）
    A

    The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 

    B

    The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 

    C

    The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 

    D

    The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    How can virtual processors be differentiated from dedicated processors from a physical processor viewpoint?（）
    A

    Dedicated processors are fractions of whole processors that are dedicated to a single partition. 

    B

    Virtual processors are the whole number of concurrent operations that the operating system can use. 

    C

    Virtual processors and not dedicated processors are processors used in Virtual IO Server partitions. 

    D

    Virtual processors and dedicated processors are interchangeable concepts, both are whole physical processors used in virtual and dedicated LPARs.


    正确答案： B
    解析： 暂无解析

相关内容