单选题A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What addition

题目
单选题
A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）
A

A CD or DVD with installation media

B

An internal SCSI adapter in the target LPAR

C

An Ethernet adapter for access to an FTP server

D

Advanced Power Virtualization feature of the p5 590

相似考题

1. A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A、DLPAR functions are not available for cloned partitionsB、The new partition has the same node number as the original LPARC、Additional filesets need to be reinstalled after the alt_disk_install cloningD、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

2. Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）A、Use shared memory and semaphores to transfer the data to the TSM LPARB、Provide gigabit Ethernet adapters in each LPAR and run a crossover cableC、Create a Virtual Ethernet between the production server and the TSM LPARsD、Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs

3. Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARSB、Use DLPAR to move resources from the test LPAR to training when training is activeC、Install Partition Load Manager to share resources between the test and training environmentsD、Install Advanced Power Virtualization and then use micro-partitioning for both the test and training LPARs

4. Companycom wants to reduce the number of copper, Ethernet adapters on their 4 way p5 570 running AIX 5.3 used in each of the four LPARs. Companycom has one database LPAR, two application LPARs, and one web LPAR. Only the Web LPAR needs to communicate with the outside world. What is the minimum number of Ethernet adapters that should be provided to ensure redundancy and no single point of failure?（）A、One single port Ethernet adapterB、Four dual port Ethernet adaptersC、Two single port Ethernet adaptersD、Eight single port Ethernet adapters

更多“单选题A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What addition”相关问题

  • 第1题：

    When doing the Solution Assurance for a p5 570 with several LPARs, it is discovered that the customer plans to back the system up using mksysb. The customer would like to do unattended automated system backups and incorporate them into their off-site data recovery system. Which mksysb solution should be implemented?（）

    • A、A local DVD-ROM drive
    • B、A NFS mount on a NIM Master
    • C、A SSA disk array and mirror the data
    • D、A local tape drive and use DLPAR to move the tape to each LPAR

    正确答案:B

  • 第2题：

    A p5 570 12 way was purchased with the plan to install six LPARs running AIX 5.2. The machine has 12 disks spread evenly over the internal server drawers. The customer would now like to add a seventh LPAR. Which of the following should be added for the seventh LPAR boot device?（）

    • A、An additional 7311-D10 drawer
    • B、An adapter to boot off a SAN device
    • C、An additional disk to the media bay
    • D、Two disks to the internal configuration

    正确答案:B

  • 第3题：

    Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux. How would access be provided to the storage subsystem devices for this Linux LPAR?（）

    • A、Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive 
    • B、Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server 
    • C、Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition 
    • D、3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solution

    正确答案:B

  • 第4题：

    Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux. Which of the following would be the best solution to recommend?（）

    • A、Assign the adapter to an IO Hosting partition
    • B、Use AIX 5L affinity to move the application from SUSE to AIX
    • C、Use AIX 5.3 drivers to install the adapter in the Linux LPAR
    • D、Assign the adapter to an AIX 5.3 partition running Linux Affinity

    正确答案:A

  • 第5题：

    单选题
    A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）
    A

    A CD or DVD with installation media

    B

    An internal SCSI adapter in the target LPAR

    C

    An Ethernet adapter for access to an FTP server

    D

    Advanced Power Virtualization feature of the p5 590


    正确答案： B
    解析： 暂无解析

  • 第6题：

    单选题
    A large customer is consolidating their pSeries systems onto a p5 590. They will have a requirement for a single device (disk, lun) to have multiple paths through different  adapters in a single LPAR. The primary applications were written for AIX 5.2. Which of the following would be the recommended solution to satisfy this requirement?（）
    A

    Assign the adapters to a Virtual IO partition

    B

    Use the MPIO function included in AIX 5.2

    C

    Migrate the application to AIX 5.3 and use the MPIO function

    D

    Set up two Virtual IO partitions and attach both partitions to the device


    正确答案： C
    解析： 暂无解析

  • 第7题：

    单选题
    When doing the Solution Assurance for a p5 570 with several LPARs, it is discovered that the customer plans to back the system up using mksysb. The customer would like to do unattended automated system backups and incorporate them into their off-site data recovery system. Which mksysb solution should be implemented?（）
    A

    A local DVD-ROM drive

    B

    A NFS mount on a NIM Master

    C

    A SSA disk array and mirror the data

    D

    A local tape drive and use DLPAR to move the tape to each LPAR


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    Companycom wants to reduce the number of copper, Ethernet adapters on their 4 way p5 570 running AIX 5.3 used in each of the four LPARs. Companycom has one database LPAR, two application LPARs, and one web LPAR. Only the Web LPAR needs to communicate with the outside world. What is the minimum number of Ethernet adapters that should be provided to ensure redundancy and no single point of failure?（）
    A

    One single port Ethernet adapter

    B

    Four dual port Ethernet adapters

    C

    Two single port Ethernet adapters

    D

    Eight single port Ethernet adapters


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    A system administrator has a pSeries p5-520 2-way with AIX 5L V5.2 with a peak utilization of 50%. There is a request to add a new Web server for a small department. Which of the following solutions is the best fit for this environment？（）
    A

    Create a dedicated LPAR for the existing workload and a Micro-Partition for the Web server. 

    B

    Create a dedicated LPAR for the existing workload and a dedicated LPAR for the Web server.

    C

    Create a Micro-Partition for the existing workload and a dedicated LPAR for the Web server.

    D

    Create a Micro-Partition for the existing workload and a Micro-Partition for the Web server.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux. Which of the following would be the best solution to recommend?（）
    A

    Assign the adapter to an IO Hosting partition

    B

    Use AIX 5L affinity to move the application from SUSE to AIX

    C

    Use AIX 5.3 drivers to install the adapter in the Linux LPAR

    D

    Assign the adapter to an AIX 5.3 partition running Linux Affinity


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Companycom has just added some new disk drives to a p5 590. The customer needs to know the largest Logical Track Group that these drives will support. What is the best way to locate this information?（）
    A

    Use lquerypv to read the drive

    B

    Use lspv and look at PP Size value

    C

    Look on the outside of the drive itself

    D

    Use bootinfo to find the LTG on the drive


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）
    A

    Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS

    B

    Use DLPAR to move resources from the test LPAR to training when training is active

    C

    Install Partition Load Manager to share resources between the test and training environments

    D

    Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Companycom is currently using a p690 and has just ordered a p5 590. They prefer to run in full system partition mode, since their application will utilize all the resources in the machine, and they don't want the overhead of an LPAR. What is the best response to the customer about the POWER5 capabilities?（）

    • A、POWER5 runs in an SMP mode as default
    • B、POWER5 can run in a full system mode the same as the p690
    • C、POWER5 can run in full system mode with the purchase of PLM
    • D、POWER5 can run in a full system mode， but it is in LPAR mode

    正确答案:D

  • 第14题：

    A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）

    • A、A CD or DVD with installation media
    • B、An internal SCSI adapter in the target LPAR
    • C、An Ethernet adapter for access to an FTP server
    • D、Advanced Power Virtualization feature of the p5 590

    正确答案:A

  • 第15题：

    Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?（）

    • A、VIO Server
    • B、AIX 5.2 ML4
    • C、Shared Ethernet Adapter
    • D、AIX 5.3 with Advanced Power Virtualization

    正确答案:D

  • 第16题：

    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）

    • A、The LPAR Configuration backup is corrupt
    • B、The LPAR Configuration has been altered using DLPAR
    • C、The LPAR Configuration backup was performed on a different HMC
    • D、The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed

    正确答案:B

  • 第17题：

    单选题
    A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）
    A

    DLPAR functions are not available for cloned partitions

    B

    The new partition has the same node number as the original LPAR

    C

    Additional filesets need to be reinstalled after the alt_disk_install cloning

    D

    The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured


    正确答案： D
    解析： 暂无解析

  • 第18题：

    单选题
    A p5 570 12 way was purchased with the plan to install six LPARs running AIX 5.2. The machine has 12 disks spread evenly over the internal server drawers. The customer would now like to add a seventh LPAR. Which of the following should be added for the seventh LPAR boot device?（）
    A

    An additional 7311-D10 drawer

    B

    An adapter to boot off a SAN device

    C

    An additional disk to the media bay

    D

    Two disks to the internal configuration


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）
    A

    The LPAR Configuration backup is corrupt

    B

    The LPAR Configuration has been altered using DLPAR

    C

    The LPAR Configuration backup was performed on a different HMC

    D

    The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）
    A

    Use shared memory and semaphores to transfer the data to the TSM LPAR

    B

    Provide gigabit Ethernet adapters in each LPAR and run a crossover cable

    C

    Create a Virtual Ethernet between the production server and the TSM LPARs

    D

    Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    A system administrator has a mksysb on tape of an AIX 5.2 machine and needs to install it on a different server. How can this be accomplished？（）
    A

    Install the base AIX from 5.2 media and then install the mksysb overtop.

    B

    Mount the tape and use the tar command to install AIX and the rest of the contents of the rootvg.

    C

    Insert the mksysb tape and a 5.2 base media CD and then boot to maintenance mode and initiate the install.

    D

    Install AIX 5.2 from base media and then perform an update_all install from the mksysb tape of the original machine.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Companycom is currently using a p690 and has just ordered a p5 590. They prefer to run in full system partition mode, since their application will utilize all the resources in the machine, and they don't want the overhead of an LPAR. What is the best response to the customer about the POWER5 capabilities?（）
    A

    POWER5 runs in an SMP mode as default

    B

    POWER5 can run in a full system mode the same as the p690

    C

    POWER5 can run in full system mode with the purchase of PLM

    D

    POWER5 can run in a full system mode， but it is in LPAR mode


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux. How would access be provided to the storage subsystem devices for this Linux LPAR?（）
    A

    Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive 

    B

    Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server 

    C

    Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition 

    D

    3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solution


    正确答案： D
    解析： 暂无解析

相关内容