Create LVM mirrors between LUNs
MPIO is necessary as the device driver
Use separate fibre adapters in the Virtual IO Server for each LUN
Virtual IO Server is a disk subsystem and must control the LUNs behind it
第1题:
How can virtual processors be differentiated from dedicated processors from a physical processor viewpoint?()
第2题:
A customer uses third party storage and would like to connect it to a Virtual IO server on a Power 550. How can the third party storage device drivers be installed? ()
第3题:
A customer is installing an HMC-managed Power 720 with two partitions, one for Production the other for Testing. They plan to use the Testing partition only occasionally and want to minimize hardware. Which of the following meets these requirements?()
第4题:
A customer wants to run DB2 on a Power 780 with uncapped partitions. They have licensed DB2 for 32 of the 64 active cores, and will use it in multiple partitions. How can the customer ensure that the number of licenses purchased for DB2 is not exceeded?()
第5题:
Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?()
第6题:
You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch
Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch
Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch
The NPIV switch will count against the number of domains in a fabric
第7题:
Create LVM mirrors between LUNs
MPIO is necessary as the device driver
Use separate fibre adapters in the Virtual IO Server for each LUN
Virtual IO Server is a disk subsystem and must control the LUNs behind it
第8题:
Ask the customer to confirm which option is best for their environment.
Order the fibre channel option and purchase a converter later if necessary.
Order both SCSI and fibre channel adapters to cover both potential options.
Inform the customer that fibre channel was selected for performance reasons.
第9题:
From the HMC
From a NFS mount
From a FTP server
From any CD or DVD drive on another server
第10题:
Use SUMA to obtain the drivers.
Use smitty install on the client partitions.
Use oem_setup_env environment in the VIO server.
Use cfgmgr to configure the devices within the client partition.
第11题:
The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions.
The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks.
The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition.
The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
第12题:
Dedicated processors are fractions of whole processors that are dedicated to a single partition.
Virtual processors are the whole number of concurrent operations that the operating system can use.
Virtual processors and not dedicated processors are processors used in Virtual IO Server partitions.
Virtual processors and dedicated processors are interchangeable concepts, both are whole physical processors used in virtual and dedicated LPARs.
第13题:
A system is being planned with three production partitions, one each for an IBM i, AIX standard edition, and Power Linux applications. One fibre-channel attached TS3100 tape library will be shared between the partitions for backup. Which solution provides tape library sharing with minimum operator intervention?()
第14题:
Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?()
第15题:
What type of configuration can provide the best availability in a Virtual IO Server environment?()
第16题:
A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?()
第17题:
Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?()
第18题:
Reallocate the Virtual IO Server disks to the user LPAR
Create a stripe-group within the Virtual IO Server to protect against disk failure
Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO Servers
第19题:
Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.
Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.
Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.
Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.
第20题:
Capped and with a lower share
Uncapped and with a lower share
Uncapped and with a higher share
Capped and with no change in share
第21题:
Provide multiple paths to all resources through 2 or more Virtual IO Servers
Mirror all disk resources on the Virtual IO Server to present to the client LPAR
Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter (SEA)
第22题:
Configure VIO Server Express Edition to control the tape library through one fibre channel card.Assign the library to the production partitions when needed.
Configure the IBM i partition to own the tape library.Use IBM i virtualization to host a virtual tape library connection to the AIX and Linux partition.Assign the library to the production partitions when needed.
Configure a fibre channel card for each partition, and a configure fibre switch.Connect the partitions and tape library to the switch.Zone the switch so all partitions can enable the tape when needed and disable the tape when finished.
Configure AIX to control the tape library through one fibre channel adapter.Use AIX virtualization to host a virtual tape library connection to the IBM i and Linux partitions.Assign the library to the production partitions when needed.
第23题:
Create two virtual adapters on the client, each one from a separate Virtual IO Server
Enable dead gateway detection on the client so that the network traffic can be rerouted
Have a spare network card on standby in the client in case the Virtual IO Server goes down
Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two separate Virtual IO Servers