单选题On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition.

题目
单选题
On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）
A

2 

B

3 

C

4 

D

8

相似考题

1.What is the maximum amount of memory supported on IBM BladeCenter HS22 （using 4GB DIMMs）？（）A、128GBB、32GBC、48GBD、64GB

2.On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）A、2 B、3 C、4 D、8

3. An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation： LPAR 1 memory ： min = 10 GB des = 15 GB max = 24 GB  LPAR 2memory ： min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory， but the operation fails. The administrator can  however allocate 512 MB that is free to LPAR 1 on the 570.  What is the most likely cause of this failure when dynamically moving memory？（）A、 Maxperm% is set too low on LPAR 2B、 Insufficient paging space on LPAR 1C、 Service IBM.DRM is unavailable on LPAR 1D、 Insufficient pinnable memory frames available on LPAR 2

4. A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?（）A、The Power 550 is licensed for three LPARs only.B、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.C、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks.D、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.

更多“单选题On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition.”相关问题

  • 第1题：

    Companycom has the following: 8 x 1.65GHz CPUs 16GB Memory 4 LPARs LPAR 1: Test/Dev 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 2: QA 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 3: Prod 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 4: Web App 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, SUSE Linux Utilization over a 30 day period LPAR 1: Average utilization was 15%, Peak utilization was 100% LPAR 2: Average utilization was 25%, Peak utilization was 100% LPAR 3: Average utilization was 50%, Peak utilization was 90% LPAR 4: Average utilization was 35%, Peak utilization was 100% If the customer has a requirement for all four LPARs moved to a p5 590 and to have dedicated CPU resources. Which of the following would best describe the profile requirements?（）

    • A、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 
    • B、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 2.0, max CPU 3.0, desired CPU 3.0 
    • C、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 3.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 
    • D、LPARs 1 and 2, SMT off, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT off, min CPU 1.0, max CPU 3.0, desired CPU 3.0

    正确答案:B

  • 第2题：

    A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）

    • A、LPAR-A with 1Gb FC HBA and SAN connection
    • B、LPAR-B with 2Gb FC HBA and SAN connection
    • C、LPAR-C with 4Gb FC HBA and SAN connection
    • D、LPAR-D with 8Gb FC HBA and SAN connection

    正确答案:B

  • 第3题：

    On a Hardware Management Console （HMC） at version 7， an administrator has an LPAR defined with a minimum of 0.1 processors and a maximum of 4 processors. The administrator wants to go from 1 processing unit to 3 processing units for this partition. In order to make the change，  what value should the administrator enter into the add processor resources window？ （）

    • A、 2
    • B、 3
    • C、 1.0
    • D、 2.9

    正确答案:A

  • 第4题：

    A competitor informed a customer that blades were not suitable to implement robust virtual computing infrastructures due to memory limitations.  What is the maximum memory supported by an IBM Intel Blade using what size memory DIMMs？ （）

    • A、16GB using 4GB Memory DIMMs
    • B、8GB using 2GB Memory DIMMs
    • C、32GB using 4GB Memory DIMMs
    • D、16GB using 2GB Memory DIMMs

    正确答案:C

  • 第5题：

    You enabled Automatic Shared Memory Management. The initialization parameters are set as shown below：  SGA_TARGET = 10GB SGA_MAX_SIZE = 14GB  STREAMS_POOL_SIZE = 1GB  SHARED_POOL_SIZE = 3GB  Which two statements are correct in this scenario？ （）

    • A、 A total of 14 GB memory will be allocated to the automatically tuned memory components
    • B、 Reducing the value for SGA_TARGET to 9 GB will automatically decrease the memory allocated to shared pool from 3 GB to 2 GB
    • C、 The value for SGA_TARGET can be increased up to a maximum of 14 GB
    • D、 A maximum of 3 GB can be allocated to shared pool
    • E、 Increasing the value for SGA_TARGET to 12 GB will automatically increase the memory allocated to autotuned parameters
    • F、 Increasing the value for SGA_TARGET will automatically increase the memory allocated for  STREAMS_POOL_SIZE

    正确答案:C,E

  • 第6题：

    Minimum 1 GB Memory. Which size should you recommend？（）

    • A、 Small
    • B、 Medium
    • C、 Large
    • D、 ExtraSmall

    正确答案:A

  • 第7题：

    单选题
    An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation： LPAR 1 memory ： min = 10 GB des = 15 GB max = 24 GB  LPAR 2memory ： min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory， but the operation fails. The administrator can  however allocate 512 MB that is free to LPAR 1 on the 570.  What is the most likely cause of this failure when dynamically moving memory？（）
    A

     Maxperm% is set too low on LPAR 2

    B

     Insufficient paging space on LPAR 1

    C

     Service IBM.DRM is unavailable on LPAR 1

    D

     Insufficient pinnable memory frames available on LPAR 2


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    An administrator is upgrading memory on the server. Once the server in turned back on， the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory.  Which of the following should the administrator do FIRST？（）
    A

     Replace memory chips with known good memory chips.

    B

     Reseat the memory chips.

    C

     Update the BIOS.

    D

     Upgrade the server OS.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A competitor informed a customer that blades were not suitable to implement robust virtual computing infrastructures due to memory limitations.  What is the maximum memory supported by an IBM Intel Blade using what size memory DIMMs？ （）
    A

    16GB using 4GB Memory DIMMs

    B

    8GB using 2GB Memory DIMMs

    C

    32GB using 4GB Memory DIMMs

    D

    16GB using 2GB Memory DIMMs


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?（）
    A

    The Power 550 is licensed for three LPARs only.

    B

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.

    C

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks.

    D

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    An administrator is adding additional memory into a server that registers 1GB of memory in the OS and notices that the system has 2GB of memory physically installed; however, the server only shows 1GB of memory during POST. Which of the following is the MOST likely reason for this?（）
    A

    The OS does not support more than 1GB of memory.

    B

    The system memory has different manufacture dates.

    C

    Two of the memory sticks are defective.

    D

    The server is using memory interleaving.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom has the following: 8 x 1.65GHz CPUs 16GB Memory 4 LPARs LPAR 1: Test/Dev 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 2: QA 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 3: Prod 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 4: Web App 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, SUSE Linux Utilization over a 30 day period LPAR 1: Average utilization was 15%, Peak utilization was 100% LPAR 2: Average utilization was 25%, Peak utilization was 100% LPAR 3: Average utilization was 50%, Peak utilization was 90% LPAR 4: Average utilization was 35%, Peak utilization was 100% If the customer has a requirement for all four LPARs moved to a p5 590 and to have dedicated CPU resources. Which of the following would best describe the profile requirements?（）
    A

    LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 

    B

    LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 2.0, max CPU 3.0, desired CPU 3.0 

    C

    LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 3.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 

    D

    LPARs 1 and 2, SMT off, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT off, min CPU 1.0, max CPU 3.0, desired CPU 3.0


    正确答案： C
    解析： 暂无解析

  • 第13题：

    An administrator is adding additional memory into a server that registers 1GB of memory in the OS and notices that the system has 2GB of memory physically installed； however， the server only shows 1GB of memory during POST.  Which of the following is the MOST likely reason for this？（）

    • A、 The OS does not support more than 1GB of memory.
    • B、 The system memory has different manufacture dates.
    • C、 Two of the memory sticks are defective.
    • D、 The server is using memory interleaving.

    正确答案:C

  • 第14题：

    A customer needs a new Microsoft Windows 2003 Server.  They are running an application that requires substantial memory.  They would like a rack mountable system， which will support four Xeon processors with 2MB of L3 cache.  Which of the following is the minimum configuration to satisfy the customer’s requirements？（）

    • A、x445 with four Xeon MP processors and 8GB of memory
    • B、x445 with four Xeon MP processors and 16GB of memory in a single SMP module
    • C、x445 with four Xeon DP processors and 16GB of memory in a single SMP module
    • D、x445 with two SMP modules each containing two Xeon DP processors and 8GB of memory

    正确答案:A

  • 第15题：

    A customer needs a new database server.  The database application has a high memory overhead but does not benefit from 8-way processing.  They would like a rack mountable system， which will support four Xeon processors with 512KB of L2 cache and 16GB of main system memory.  Which of the following will satisfy the customer’s requirements？（）

    • A、x445 with four Xeon DP processors and 16GB of memory in a single SMP module
    • B、x445 with four Xeon MP processors and 16GB of memory in a single SMP module
    • C、x445 with two SMP modules each containing two Xeon DP processors and 8GB of memory
    • D、x445 with two SMP modules each containing two Xeon MP processors and 8GB of memory

    正确答案:C

  • 第16题：

    Companycom wants to buy a new p5 570 running AIX 5.3. The applications require 4 processors and 8GB of memory. There is a requirement to have a Virtual IO Server. What is the smallest p5 570 that should be sold to this customer?（）

    • A、4 processors 8GB of memory
    • B、5 processors 8GB of memory
    • C、4 processors 10GB of memory
    • D、5 processors 10GB of memory

    正确答案:D

  • 第17题：

    You enabled Automatic Shared Memory Management. The initialization parameters are set as shown below：  SGA_TARGET= 10GB  SGA_MAX_SIZE = 14GB  STREAMS_POOL_SIZE = 1GB SHARED_POOL_SIZE = 3GB  Which two statements are correct in this scenario？ （）

    • A、 A maximum of 3 GB can be allocated to shared pool
    • B、 The value for SGA_TARGET can be increased up to a maximum of 15 GB
    • C、 A total of 14 GB memory will be allocated to the automatically tuned memory components.
    • D、 Increasing the value for SGA_TARGET will automatically increase the memory allocated for STREAMS_POOL_SIZE
    • E、 Increasing the value for SGA_TARGET to 12 GB will automatically increase the memory allocated to autotuned parameters
    • F、 Reducing the value for SGA_TARGET to 9 GB will automatically decrease the memory allocated to shared pool from 3 GB to 2 GB

    正确答案:B,E

  • 第18题：

    单选题
    What is the maximum amount of memory supported on IBM BladeCenter HS22 （using 4GB DIMMs）？（）
    A

    128GB

    B

    32GB

    C

    48GB

    D

    64GB


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    A customer needs a new database server.  The database application has a high memory overhead but does not benefit from 8-way processing.  They would like a rack mountable system， which will support four Xeon processors with 512KB of L2 cache and 16GB of main system memory.  Which of the following will satisfy the customer’s requirements？（）
    A

    x445 with four Xeon DP processors and 16GB of memory in a single SMP module

    B

    x445 with four Xeon MP processors and 16GB of memory in a single SMP module

    C

    x445 with two SMP modules each containing two Xeon DP processors and 8GB of memory

    D

    x445 with two SMP modules each containing two Xeon MP processors and 8GB of memory


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    Minimum 1 GB Memory. Which size should you recommend？（）
    A

     Small

    B

     Medium

    C

     Large

    D

     ExtraSmall


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    A customer needs a new Microsoft Windows 2003 Server.  They are running an application that requires substantial memory.  They would like a rack mountable system， which will support four Xeon processors with 2MB of L3 cache.  Which of the following is the minimum configuration to satisfy the customer’s requirements？（）
    A

    x445 with four Xeon MP processors and 8GB of memory

    B

    x445 with four Xeon MP processors and 16GB of memory in a single SMP module

    C

    x445 with four Xeon DP processors and 16GB of memory in a single SMP module

    D

    x445 with two SMP modules each containing two Xeon DP processors and 8GB of memory


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）
    A

    2 

    B

    3 

    C

    4 

    D

    8


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    On a Hardware Management Console （HMC） at version 7， an administrator has an LPAR defined with a minimum of 0.1 processors and a maximum of 4 processors. The administrator wants to go from 1 processing unit to 3 processing units for this partition. In order to make the change，  what value should the administrator enter into the add processor resources window？ （）
    A

     2

    B

     3

    C

     1.0

    D

     2.9


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    Companycom wants to buy a new p5 570 running AIX 5.3. The applications require 4 processors and 8GB of memory. There is a requirement to have a Virtual IO Server. What is the smallest p5 570 that should be sold to this customer?（）
    A

    4 processors 8GB of memory

    B

    5 processors 8GB of memory

    C

    4 processors 10GB of memory

    D

    5 processors 10GB of memory


    正确答案： B
    解析： 暂无解析

相关内容