mktcpip -h hostname -a 9.47.53.x -m 255.255.255.64 -i en0 -g 9.3.230.1
ifconfig en0 netmask 255.255.255.64
chdev -l en0 -a netmask=255.255.255.192
ifconfig en0 netmask 0xffffffc0
第1题:
The IP network 210.106.14.0 is subnetted using a /24 mask. How many usable networks and host addresses can be obtained from this?()
第2题:
Companycom is migrating from p670 systems running AIX 5.2 to p5 595 systems running AIX 5.3. They will be changing out only the system units. They will re-use the existing 61D drawers and adapters with the new p5 595 systems. What compatibility issue must be considered?()
第3题:
During system boot, the system hangs at LED 0C31. What is the first step the system administrator should take to correct the problem?()
第4题:
After updating serverB’s network configurations, an administrator notices that serverA, which resides in a different subnet, is unable to communicate with serverB via ssh or telnet. As ping’s to the server fail, the administrator logs onto serverB via a console and finds an available interface en0 in the ’up’ state. From the console connection, en0 can communicate with other servers in the same subnet. What is the most likely cause of the problem?()
第5题:
A System p administrator must change the 9.47.53.0 subnet from 128 addresses to 64 addresses. How can the AIX systems in the network be permanently modified to accomplish this()
第6题:
An AIX server has 2 network interfaces and the system administrator wants to enable the users on the locally configured network interface to be able to connect to systems configured on the global network interface. How is it accomplished?()
第7题:
Enable routed on the server
Enable gated on the server
Enable ipforwarding on the server
Set network options back to default
第8题:
Check system console connections
Check system network connections
Boot in service mode and change the bootlist
Boot from the AIX installation media and mount rootvg filesystems
第9题:
snap -a
snap -i
prtconf
lsconf
第10题:
Upgrade the switches
Configure BPDU guard
Configure VLAN access lists
Configure port security
Configure Dynamic ARP inspection
第11题:
ifconfig en0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254
ifconfig ent0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254
mktcpip h test61 -a 192.168.10.1 -i en0 m 255.255.255.0 g 192.168.10.254 -s
mktcpip h test61 -a 192.168.10.1 -i ent0 m 255.255.255.0 g 192.168.10.254 -
第12题:
Upgrade the switches
Configure BPDU guard
Configure VLAN access lists
Configure port security
Configure Dynamic ARP inspection
第13题:
An AIX system administrator needs to adjust the maximum amount of memory that can be pinned. Which of the following commands is used to make the change?()
第14题:
The company auditors require a System p administrator to archive detailed information from each of their systems. Which of the following commands will accomplish this task()
第15题:
How can the administrator display the boot paths from which AIX can boot?()
第16题:
How should TCP/IP be configured on the ent0 network adapter?()
第17题:
How should TCP/IP be configured on the ent0 network adapter?()
第18题:
14
16
30
32
62
64
第19题:
prtconf -c
lscfg -v sys0
Check the /unix link
Check for JFS2 filesystems
第20题:
1 network with 254 hosts
4 networks with 128 hosts
2 networks with 24 hosts
6 networks with 64 hosts
8 networks with 36 hosts
第21题:
APV features are not supported for some legacy POWER4 adapters
APV will require the most current maintenance level for AIX 5.2
APV features will require that legacy POWER4 adapters be updated with new microcode
The Virtual IO Server must run AIX 5.3 and the LPARs can run either AIX 5.2 or AIX 5.3
第22题:
Migration Installation
Update.AII Installation
Preservation Installation
New and Complete Overwrite Installation
第23题:
bootinfo -r
lspath -boot
bosboot -ad hdisk0
bootlist -m normal -rv