单选题A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）A Configure 2CFFh combination fibre channel / gigabit Ethernet adapters

题目
单选题
A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）
A

Configure 2CFFh combination fibre channel / gigabit Ethernet adapters

B

Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter

C

Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

D

Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

相似考题

1. A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）A、4B、3C、2D、8

2.Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.

3.A customer needs a new 4-way p630 with three partitions to support three AIX 5.2 applications.  Each partition requires two of the following：  OS boot drives， fiber adapters， and gigabit Ethernet adapters.  The customer has an HMC with an available serial port.  In addition to the model 6C4， which of the following is required to meet the customer’s requirements？（）A、One 7311-D20 drawerB、Two 7311-D20 drawersC、Two 7311-D10 drawersD、One 7311-D10 drawers

4.A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added.  High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）A、Upgrade the network switches to 10Gb speed.B、Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.C、Install one extra adapter to team with the internal adapter and configure adapter failover.D、Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）A Configure 2CFFh combination fibre channel / gigabit Ethernet adapters”相关问题

  • 第1题：

    A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）

    • A、4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 
    • B、Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 
    • C、Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 
    • D、Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server

    正确答案:C

  • 第2题：

    A BladeCenter H customer is asking for concurrent Keyboard/Video/Mouse. Select the items required to accomplish this. （）

    • A、Advanced Management Module and cKVM Daughter Card
    • B、HS21， LS21 or JS22 Blade Server and iSCSI Expansion Card
    • C、Redundant Fibre Channel Switch Module and cKVM Daughter Card
    • D、Advanced Management Module and iSCSI Expansion Card

    正确答案:A

  • 第3题：

    A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）

    • A、Dual power supplies.
    • B、Twice the amount of disk.
    • C、Two dual-port LHEA adapters.
    • D、Two dual-port fibre channel adapters.

    正确答案:A

  • 第4题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）

    • A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 
    • B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 
    • C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第5题：

    A customer is implementing a POWER Blade solution which requires the VIO Server to be mirrored on internal disk drives. Which Blade supports the requirement?（）

    • A、JS21
    • B、JS23
    • C、PS700
    • D、PS701

    正确答案:C

  • 第6题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）
    A

    You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 

    B

    Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 

    C

    Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： C
    解析： 暂无解析

  • 第7题：

    单选题
    A customer is implementing a POWER Blade solution which requires the VIO Server to be mirrored on internal disk drives. Which Blade supports the requirement?（）
    A

    JS21

    B

    JS23

    C

    PS700

    D

    PS701


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）
    A

    Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules

    B

    Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules

    C

    Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules

    D

    Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）
    A

    4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 

    B

    Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 

    C

    Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 

    D

    Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A customer needs a new 4-way p630 with three partitions to support three AIX 5.2 applications.  Each partition requires two of the following：  OS boot drives， fiber adapters， and gigabit Ethernet adapters.  The customer has an HMC with an available serial port.  In addition to the model 6C4， which of the following is required to meet the customer’s requirements？（）
    A

    One 7311-D20 drawer

    B

    Two 7311-D20 drawers

    C

    Two 7311-D10 drawers

    D

    One 7311-D10 drawers


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）
    A

    4

    B

    3

    C

    2

    D

    8


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added.  High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）
    A

    Upgrade the network switches to 10Gb speed.

    B

    Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.

    C

    Install one extra adapter to team with the internal adapter and configure adapter failover.

    D

    Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）

    • A、Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch
    • B、Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch
    • C、Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第14题：

    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）

    • A、Fibre Channel Expansion Card for each Blade Server
    • B、cKVM Card for each Blade Server
    • C、iSCSI Expansion Card for each Blade Server
    • D、4Gb Modular Flash Drive

    正确答案:C

  • 第15题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter
    • D、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    正确答案:C

  • 第16题：

    A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）

    • A、Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules
    • B、Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules
    • C、Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules
    • D、Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules

    正确答案:D

  • 第17题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
    • D、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    正确答案:C

  • 第18题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）
    A

    Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch

    B

    Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch

    C

    Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： A
    解析： 暂无解析

  • 第19题：

    单选题
    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）
    A

    Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters

    B

    Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter

    C

    Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    D

    Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）
    A

    The FCoE card provides both LAN and fibre channel function from a single card on the blade. 

    B

    The FCoE advanced technology removes the need for any BladeCenter switching to support this function.

    C

    Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.

    D

    The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）
    A

    Dual power supplies.

    B

    Twice the amount of disk.

    C

    Two dual-port LHEA adapters.

    D

    Two dual-port fibre channel adapters.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）
    A

    Configure 2CFFh combination fibre channel / gigabit Ethernet adapters

    B

    Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter

    C

    Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    D

    Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the internal fibre switches. Consequently. the customer wants to use the Optical Pass-Thru Module （OPM）.  What TRUE statement should be mentioned to the customer regarding the OPM？（）
    A

    You can not put the Optical Pass-Thru Module in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch.

    B

    Using blade servers with the Optical Pass-Thru Module will require more fibre ports on the external fibre switch.

    C

    The Optical Pass-Thru Module does not provide the customer with an opportunity to reuse their fibre switch.

    D

    The blade servers do not work with the Optical Pass-Thru Module.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）
    A

    Fibre Channel Expansion Card for each Blade Server

    B

    cKVM Card for each Blade Server

    C

    iSCSI Expansion Card for each Blade Server

    D

    4Gb Modular Flash Drive


    正确答案： B
    解析： 暂无解析

相关内容