This section is where you define all chassis clustering configuration.
This configuration is required for members of a chassis cluster to talk to each other.
You can apply this configuration in the chassis cluster to make configuration easier.
This section is where unique node configuration is applied.
第1题:
A.
B.
C.
D.
第2题:
A.set interfaces fe-0/0/0 unit 0 ethernet-options mtu 1200
B.set interfaces fe-0/0/0 mtu 1200
C.set interfaces fe-0/0/0 unit 0 mtu 1200
D.set interfaces fe-0/0/0.0 mtu 1200
第3题:
Which protocol family is required prior to assigning an IP address to an interface?()
第4题:
In which two ways can the router ID selection be controlled?()
第5题:
You accidentally configured interface so-0/0/0.0 with /32 instead of /30. Which two solutions could you use to correct this configuration?()
第6题:
You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality?()
第7题:
Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?()
第8题:
[edit interfaces so-0/0/0.0] user@router# replace family inetaddress /32 with /30
[edit interfaces so-0/0/0.0] user@router# rename family inetaddress /32 to address /30
[edit] user@router# replace interface so-0/0/0.0 family inetaddress /32 with address /30
[edit interfaces so-0/0/0.0] user@router# delete family inet address user@router# set family inetaddress /30
第9题:
family ip
family ip6
family inet
family inet4
第10题:
This section is where you define all chassis clustering configuration.
This configuration is required for members of a chassis cluster to talk to each other.
You can apply this configuration in the chassis cluster to make configuration easier.
This section is where unique node configuration is applied.
第11题:
[edit interfaces] user@router# run ping 1.1.1.1
[edit interfaces] user@router# ping 1.1.1.1
[edit interfaces] user@router# up ping 1.1.1.1
[edit interfaces] user@router# exit ping 1.1.1.1
第12题:
set interfaces fe-0/0/0 unit 0 ethernet-options mtu 1200
set interfaces fe-0/0/0 mtu 1200
set interfaces fe-0/0/0 unit 0 mtu 1200
set interfaces fe-0/0/0.0 mtu 1200
第13题:
A.set interfaces fe-0/0/0 address 10.1.1.1/24
B.set interfaces fe-0/0/0.0 family inet address 10.1.1.1/24
C.set interfaces fe-0/0/0.0 address 10.1.1.1/24
D.set interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24
第14题:
A.family ip
B.family ip6
C.family inet
D.family inet4
第15题:
Which interface is used for RTO synchronization and forwarding traffic between the devices in a cluster?()
第16题:
[edit groups] user@host# show node0 { system { host-name NODE0; } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.1/24; } } } } } node1 { system { host-name NODE1; } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.2/24; } } } } } In the exhibit, what is the function of the configuration statements?()
第17题:
In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device? ()
第18题:
You are configuring new BGP neighbor and want to view the configuration for the interface ge-0/0/0.42.Which command do you use to achieve this result?()
第19题:
Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?()
第20题:
set ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0
set ip interface ge-0/0/0 address 192.168.1.1/24
set interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0
set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24
第21题:
[edit protocols bgp group external] user@router# set interfaces ge-0/0/0.42 ?
[edit protocols bgp group external] user@router# edit show interfaces ge-0/0/0.42
[edit protocols bgp group external] user@router# top show interfaces ge-0/0/0.42
[edit protocols bgp group external] user@router# show interfaces ge0/0/0.42
第22题:
[edit interfaces]
[edit security zones]
[edit system services]
[edit security interfaces]
第23题:
This interface is a system-created interface.
This interface belongs to NODE0 of the cluster.
This interface belongs to NODE1 of the cluster.
This interface will not exist because J6350 routers have only six slots.