单选题The error ’invalid boot disk’ means：（）A the BIOS settings are incorrect.B there is no floppy disk in the drive.C the computer was unable to make temporary space for the boot process.D the computer was unable to find the information needed to start the
题目
the BIOS settings are incorrect.
there is no floppy disk in the drive.
the computer was unable to make temporary space for the boot process.
the computer was unable to find the information needed to start the boot process.
相似考题
参考答案和解析
更多“单选题The error ’invalid boot disk’ means：（）A the BIOS settings are incorrect.B there is no floppy disk in the drive.C the computer was unable to make temporary space for the boot process.D the computer was unable to find the information needed to start the ”相关问题
-
第1题：
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."
Which two actions should you take to eliminate the STOP error? (Choose Two)
A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
B．Select Safe Mode from the Windows 2000 boot menu.
C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
D．Install a driver for the SCSI controller from a floppy disk.
E．Use Device Manager to update the driver for the SCSI controller.
正确答案：AD
解析：Explanation: To solve the problem posed in this scenario we must restart the Windows 2000 installation process and supply the correct SCSI driver. We cannot use Device Manager or Safe Mode at this stage since Windows 2000 is not installed yet. We must press F6 when Setup prompts us to do so. We must then press F6 again to supply the driver for a mass storage controller to the Windows 2000 Setup program.
Incorrect answers:
B: We cannot use Safe Mode at this stage, as Windows 2000 is not installed yet.
C: We need to Windows 2000 Server CD-ROM to be able to perform. the install process.
E: The Device Manager cannot be used at this stage since Windows 2000 is not installed yet. -
第2题：
Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）
- A、Random bluescreen error
- B、Inaccessible boot drive
- C、Missing NTLDR
- D、Invalid boot disk
正确答案:D -
第3题：
The error ’invalid boot disk’ means：（）
- A、the BIOS settings are incorrect.
- B、there is no floppy disk in the drive.
- C、the computer was unable to make temporary space for the boot process.
- D、the computer was unable to find the information needed to start the boot process.
正确答案:D -
第4题：
QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media. What should you do?（）
- A、From the BIOS, modify the startup order.
- B、From the BIOS, enable Pre-Boot Execution Environment (PXE).
- C、Create an answer file named oobe.xml and place the file on the hard disk drive.
- D、Create an answer file named autounattend.xml and place the file on the hard disk drive.
正确答案:A -
第5题：
You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server. You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）
- A、 Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
- B、 Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
- C、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.
- D、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.
- E、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
正确答案:D -
第6题：
You are upgrading two Windows NT4 computers to Windows 2000. Computer 1 completes the upgrade with no problems. During the upgrade of Computer 2， you experience a power loss and cannot boot into NT4. You want to use Computer 1 to help Computer 2 recover. How can this be done？（）
- A、 Install Windows2000 across the network install.
- B、 Run MAKEBT32.EXE on Computer1 to make diskettes to start Computer 2.
- C、 Copy the boot files from computer 1 to a floppy， boot to the floppy and continue the setup of computer2.
- D、 Computer 1 cannot help to recover Computer 2.
正确答案:B -
第7题：
You have a computer that runs Windows XP Professional. You need to create a floppy disk to start Windows XP Professional on the computer if the start files become corrupt. What should you do?（）
- A、From the Windows XP Professional computer, run diskcopy.exe /v a:.
- B、From a computer that runs Windows 98, create a MS-DOS-based startup disk.
- C、From the Windows XP Professional computer, create an Automated System Recovery (ASR) disk.
- D、From the Windows XP Professional computer, format a floppy disk. Copy the NTLDR, ntdtetect.com, and boot.ini files to the floppy disk.
正确答案:D -
第8题：
单选题Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）ARandom bluescreen error
BInaccessible boot drive
CMissing NTLDR
DInvalid boot disk
正确答案： B解析： 暂无解析 -
第9题：
单选题Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile？（）Aboot policy and BIOS policy
Bdisk scrub and boot policy
CBIOS setting scrub， boot policy， and BIOS policy
Ddisk scrub and BIOS setting scrub
正确答案： B解析： 暂无解析 -
第10题：
单选题You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server. You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）AAdd an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
BAdd the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
CStart the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.
DStart the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.
EStart the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
正确答案： C解析： 暂无解析 -
第11题：
单选题You are upgrading two Windows NT4 computers to Windows 2000. Computer 1 completes the upgrade with no problems. During the upgrade of Computer 2， you experience a power loss and cannot boot into NT4. You want to use Computer 1 to help Computer 2 recover. How can this be done？（）AInstall Windows2000 across the network install.
BRun MAKEBT32.EXE on Computer1 to make diskettes to start Computer 2.
CCopy the boot files from computer 1 to a floppy， boot to the floppy and continue the setup of computer2.
DComputer 1 cannot help to recover Computer 2.
正确答案： B解析： You should make the four startup disks of windows 2000 professional by running the command makeboot32.exe in the bootdisk folder of windows 2000 professional CD on computer1. To install windows 2000 professional across the network you should have a distribution folder for the installation file and the network connectivity to that distribution folder.But the second system is even not booting properly. Choice “Copy the boot files from computer 1 to a floppy， boot to the floppy and continue the setup of computer2 is incorrect because just only copying the booting files to the floppy disk will not help the computer 2. Choice “Computer 1 cannot help recover Computer 2” contains no meaning. -
第12题：
单选题You have a computer that runs Windows XP Professional. You need to create a floppy disk to start Windows XP Professional on the computer if the start files become corrupt. What should you do?（）AFrom the Windows XP Professional computer, run diskcopy.exe /v a:.
BFrom a computer that runs Windows 98, create a MS-DOS-based startup disk.
CFrom the Windows XP Professional computer, create an Automated System Recovery (ASR) disk.
DFrom the Windows XP Professional computer, format a floppy disk. Copy the NTLDR, ntdtetect.com, and boot.ini files to the floppy disk.
正确答案： C解析： 暂无解析 -
第13题：
You are the network administrator for Ezonexam.
The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.
Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.
One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.
You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.
What should you do?
A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.
B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.
D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
正确答案：A
解析：Explanation:Therearefourwaystoperform.anattendedinstallation:1.BoottoaCD-ROM,therebyinvokingthesetuproutine.2.BoottoacurrentoperatingsystemwithCD-ROMsupportandmanuallyinvokethesetuproutine.3.BoottoasetoffoursetupdisksandthenprovidetheCD-ROMwhenprompted.4.Boottoanetwork-awareoperatingsystemandinvokesetupoverthenetwork.IfyouhaveacomputerwhoseBIOSsupportsbootingfromaCD-ROM,youcansetupWindows2000Serverwithoutinstallinganoperatingsystemonyourharddriveandwithoutrequiringnetworksupport.Todoso,configureyourcomputertoboottotheCD-ROMintheBIOS.IntheabovescenariotheserverfailedandforyoutorecovertheserverasquicklyaspossibleandrecoveringasmuchdataaspossibleyouneedtousetheWindows2000ServerCDandselecttheRepairoptioninSetup.Incorrectanswers:B:Thisoptionwillnotbethebesttofollowiftheserveristoberecoveredwithintheshortestpossibletime.Youwillalsolosesomedatasincere-creatingthesharedfoldersonthefirstharddiskwouldalreadyhavedatamissingsincePartitionCiscorrupted.C:EmergencyRepairDiskenablesyoutorecoverfromRegistrysettingsthatrenderyoursysteminoperable.ThismightbemisconfigurationthatcouldnotbecaughtwiththeLastKnownGoodConfiguration,oritmightbedeleteduseraccountsorotherRegistrychanges.Thisisnotaregistryproblem.TheEmergencyRepairDiskcanbeusedtofacilitatesomesystemrepairsonyourWindows2000server.Essentially,thediskcanbeusedtorepairstartupproblems,likewhenessentialstartupfilesarenotpresentandyourServerrefusestoboot.However,thisproblemneedstobeaddressesasquicklyaspossibleandmakinguseoftheRepairoptioninSetupfromtheWindows2000ServerCDwouldbethequickermethod.D:TheRecoveryconsoleisapowerfultext-basedbootalternativeforWindows2000Server.Ifyoursystembecomessocorruptthatitwillnotbootandnootherrepairprocesswillhelp,youcanboottotheRecoveryconsoleandcopyfilestoorfromyourserver.Inaddition,youcanstopandstartservices,ifaservicethatyouhaveinstalledcausesproblemswithbooting.Thisoptiondoesnotrepresentthequickestwaytoaddresstheproblemathand. -
第14题：
Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile？（）
- A、 boot policy and BIOS policy
- B、 disk scrub and boot policy
- C、 BIOS setting scrub， boot policy， and BIOS policy
- D、 disk scrub and BIOS setting scrub
正确答案:D -
第15题：
When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）
- A、Out-of-date BIOS
- B、Invalid motherboard jumper settings
- C、Failing power supply
- D、Floppy disk in the drive
正确答案:D -
第16题：
You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）
- A、Modify the computer's BIOS so that it automatically detects whether drive D is connected.
- B、Modify the computer's BIOS so that drive C is first in the computer's boot order.
- C、Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect.
- D、Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: "Microsoft Windows 98" /fastdetect.
正确答案:C -
第17题：
Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）
- A、Start the computer in safe mode and reformat the hard disk.
- B、Start the computer in the debug mode and reformat the hard disk.
- C、Start the computer using the ERD and repair the Master Boot Record.
- D、Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.
正确答案:D -
第18题：
You are the desktop administrator for your company's sales department. The company's network contains a RIS server. You need to install Windows XP Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows XP Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disks on which to install Windows XP Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）
- A、Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
- B、Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
- C、Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.
- D、Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.
- E、Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
正确答案:D -
第19题：
单选题The error ’invalid boot disk’ means：（）Athe BIOS settings are incorrect.
Bthere is no floppy disk in the drive.
Cthe computer was unable to make temporary space for the boot process.
Dthe computer was unable to find the information needed to start the boot process.
正确答案： C解析： 暂无解析 -
第20题：
单选题Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）AStart the computer in safe mode and reformat the hard disk.
BStart the computer in the debug mode and reformat the hard disk.
CStart the computer using the ERD and repair the Master Boot Record.
DStart the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.
正确答案： B解析： 暂无解析 -
第21题：
单选题QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media. What should you do?（）AFrom the BIOS, modify the startup order.
BFrom the BIOS, enable Pre-Boot Execution Environment (PXE).
CCreate an answer file named oobe.xml and place the file on the hard disk drive.
DCreate an answer file named autounattend.xml and place the file on the hard disk drive.
正确答案： B解析： 暂无解析 -
第22题：
单选题You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）AModify the computer's BIOS so that it automatically detects whether drive D is connected.
BModify the computer's BIOS so that drive C is first in the computer's boot order.
CModify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)=Microsoft Windows XP Professional /fastdetect.
DModify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: Microsoft Windows 98 /fastdetect.
正确答案： B解析： 暂无解析 -
第23题：
单选题You are the desktop administrator for your company's sales department. The company's network contains a RIS server. You need to install Windows XP Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows XP Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disks on which to install Windows XP Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）AAdd an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
BAdd the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
CStart the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.
DStart the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.
EStart the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
正确答案： E解析： 暂无解析 -
第24题：
单选题A user reports that he is unable to start his computer. He provides the following information:.The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker). The user cannot locate his BitLockerrecovery key. You need to start Windows 7 on the computer. The solution must use the minimum amount ofadministrative effort. What should you do?（）AFrom the BIOS, disable the Trusted Platform Module (TPM).
BStart the computer from the Windows 7 installation media and select Install now.
CStart the computer from the Windows 7 installation media and select Repair your computer.
DStart the computer from the Windows 7 installation media, press SHIFT+F10, and then run CHKDSK.
正确答案： A解析： 暂无解析