A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?()
A.#vtp domain unset
B.#delete vlan.dat
C.#no vtp domain
D.#vtp domain null
第1题:
As witch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?()
第2题:
Which IOS security feature is configured by the ip inspect inspection-name {in | out} command?()
第3题:
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?()
第4题:
You want to configure switch R1 to propagate VLAN information across the Company network using VTP. What must be configured on a Cisco switch in order to advertise VLAN information?()
第5题:
Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?()
第6题:
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?()
第7题:
The VLAN ID of all known VLANs,the management domain name,and the total number of trunk links on the switch.
The VLAN ID of all known VLANs,a 1-bit canonical format (CF1 Indicator),and the switch configuration revision number.
The management domain name,the switch configuration revision number,the known VLANs, and their specific parameters.
A 2-byte TPID with a fixed value of 0x8100 for the management domain number,the switch configuration revision number,the known VLANs,and their specific parameters.
None of the other alternatives apply.
第8题:
TEST1 is configured as a VTP server with a different domain name.
TEST1 is not configured to participate in VTP.
TEST1 is configured as a VTP server with the domain name main1.
TEST1 has a lower VTP configuration revision than the current VTP revision.
TEST1 has a higher VTP configuration revision than the current VTP revision.
TEST1 is configured with only VLAN1.
第9题:
#vtp domain unset
#delete vlan.dat
#novtp domain
#vtp domain null
第10题:
When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
Each broadcast domain on a switch can have its own unique VTP domain
VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
VTP pruning is used to increase available bandwidth in trunk links
Client,server,and transparent are valid VTP modes
To configure a switch to be part of two VTP domains,each domain must have its own passwords
第11题:
#vtp domain unset
#delete vlan.dat
#no vtp domain
#vtp domain null
第12题:
Transparent
Server
Auto
Client
User
第13题:
Which three statements about VTP features are true?()
第14题:
A switch that is to be added to the production network has been preconfigured (trunks, VLANs, VTP, and STP) and was tested in your lab. After installing the switch into the network, the entire network went down. What might explain what happened? ()
第15题:
A VTP domain has six active VLANs. Without notice, all VLANs except VLAN1 fail. Just prior tothe failure, Switch2 was added to the network. Which three issues on Switch2 could be the cause?()
第16题:
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?()
第17题:
Switch R1 is configured to use the VLAN Trunking Protocol (VTP). What does R1 advertise in its VTP domain?()
第18题:
A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?()
第19题:
#vtp domain unset
#delete vlan.dat
#no vtp domain
#vtp domain null
第20题:
The new switch happened to be running Cisco Catalyst operating system, while the other network switches were running Cisco IOS Software.
The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.
The link costs on the new switch are set to a high value, causing all ports on the new switch to go into a forwarding mode and none into blocking mode, thereby causing a spanning-tree loop.
The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.
第21题:
Mode:Transparent,Domain Name:CISCO,Configuration Revision:3
Mode:Client,Domain Name:CISCO,Configuration Revision:3
Mode:Client,Domain Name:CISCO,Configuration Revision:5
Mode:Client,Domain Name:CISCO1,Configuration Revision:3
第22题:
VTP mode
VTP password
VTP revision number
VTP pruning
VTP domain name
None of the other alternatives apply
第23题:
SW13 has a higher VTP configuration revision than the current VTP revision
SW13 is configured as a VTP server with a different domain name
SW13 is configured as a VTP server with the domain name R1
SW13 has a lower VTP configuration revision than the current VTP revision
SW13 is not configured to participate in VTP
SW13 is configured with only VLAN1