Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()A. Redistribution must be enabled mutually (in both directions) to work correctly.B. auto - summary causes the OSPF routes redistribu

题目
Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()

A. Redistribution must be enabled mutually (in both directions) to work correctly.

B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.

C. Default metrics are not configured under EIGRP.

D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.

相似考题

1.Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?（）A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

2.Refer to the exhibit. R1 and R2 have been configured to share routing information via EIGRP. What will be the result of the configuration section shown for R2? ()A. Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network.B. Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.C. Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.D. All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .

3.Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?（）A. the routes originating from the RIP routing domainB. the routes originating from the OSPF stub areaC. all OSPF inter and intra - area routesD. all routes originating from RIP and OSPF routing domains

4.Refer to the exhibit. OSPF is configured on all routers in the network. Area 5 is configured as an NSSA areA. The RIPv2 routes are redistributed into the OSPF domain on router R5. What two types of LSAs will be originated by router R5?（）A. type 1 Router LSAB. type 2 Network LSAC. type 3 Network Summary LSAD. type 4 ASBR Summary LSAE. type 5 AS External LSAF. type 7 NSSA External LSA

参考答案和解析
参考答案：C
更多“Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?() ”相关问题

  • 第1题：

    Refer to the exhibit. Will redistribute d RIP routes from OSPF Area 2 be allowed in Area 1? ()

    A. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.

    B. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.

    C. Redistrib uted RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.

    D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.

    E. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.


    参考答案：E

  • 第2题：

    Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1?()

    A. 10.10.10.16/28 only

    B. 10.10.10.16/28 and 10.10.10.64/26

    C. 10.10.10.16/28, 10.10.10.64/26, and 172.16.10.0/24

    D. 10.10.10.64/26 only


    参考答案：D

  • 第3题：

    Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map?()

    A. The map prohibits th e redistribution of all type 2 external OSPF routes.

    B. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.

    C. The map prohibits the redistribution of all external OSPF routes with tag 6 set.

    D. Th e map permits the redistribution of all type 1 external OSPF routes.

    E. The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values?0000, 1000, 255, 1, and 1500.

    F. The map prohibits the redistribution of all ty pe 2 external OSPF routes with tag 6 set.


    参考答案：B, D, F

  • 第4题：

    Refer to the exhibit. OSPF has been configured on all routers in the network and Area 1 has been configured as a NSSA. Which statement is true about the NSSA Area 1?()

    A. Only redistributed RIP routes will appear in Area 1. They will be advertised via t ype 7 LSAs

    B. No redistributed routes can appear in Area 1, only summary routes

    C. Redistributed RIP and IGRP routes will appear in Area 1. They will be advertised via type 5 LSAs

    D. Only redistributed IGRP routes will appear in Area 1. They will be advertised via type 7 LSAs


    参考答案：D

  • 第5题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    A. the OSPF route

    B. the EIGRP route

    C. the RIPv2 route

    D. all three routes

    E. the OSPF and RIPv2 routes


    参考答案：B

  • 第6题：

    A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。

    • A、The router will use the static route.
    • B、The router will use the OSPF route.
    • C、The router will use the EIGRP route.
    • D、The router will load balance and use all three routes.

    正确答案:A

  • 第7题：

    Which two statements about route redistribution when implementing OSPF are true?（）

    • A、Routes learned using any IP routing protocol can only be redistributed into non IP routing protocols.
    • B、OSPF can import routes learned using EIGRP, RIP, and IS - IS.
    • C、OSPF routes cannot be exported into EIGRP, RIP, an d IS - IS.
    • D、At the interdomain level, OSPF cannot import routes learned using BGP.
    • E、OSPF routes can be exported into BGP.

    正确答案:B,E

  • 第8题：

    Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）

    • A、By adding all subnets listed by the show ip route connected command
    • B、By adding the subnets of working interfaces over which static neighbors have been defined
    • C、By adding subnets redistributed on the local router from another routing source
    • D、By adding all subnets listed by the show ip route static command

    正确答案:B,C

  • 第9题：

    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）

    • A、The router must have one routing protocol configured, but configuration for both routing protocols is not necessary
    • B、The router must hav e at least one working link connected to each routing domain
    • C、The redistribute command must be configured under EIGRP to send the routes to OSPF
    • D、The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF

    正确答案:B,D

  • 第10题：

    多选题
    Refer to the exhibit. Which two statements are correct？（）
    A

    All six routes will be installed in the routing table

    B

    Two routes will be installed in the routing table

    C

    Four routes will be installed in the routing table

    D

    All the routes were redistributed into BGP from an IGP

    E

    All the routes were originated by BGP with the network command


    正确答案： A,B
    解析： 暂无解析

  • 第11题：

    多选题
    Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map？（）
    A

    The map prohibits the redistribution of all type 2 external OSPF routes with tag 6 set

    B

    The map prohibits the redistribution of all type 2 external OSPF routes

    C

    The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values40000， 1000， 255， 1， and 1500

    D

    The map prohibits the redistribution of all external OSPF routes with tag 6 set

    E

    All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8

    F

    The map permits the redistribution of all type 1 external OSPF routes


    正确答案： C,A
    解析： 暂无解析

  • 第12题：

    多选题
    Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）
    A

    By adding all subnets listed by the show ip route connected command

    B

    By adding the subnets of working interfaces over which static neighbors have been defined

    C

    By adding subnets redistributed on the local router from another routing source

    D

    By adding all subnets listed by the show ip route static command


    正确答案： B,C
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）

    A. The no auto - summary command needs to be added under router eigrp 1

    B. The subnets keyword was not included in the redistribute command under router ospf 1

    C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router A

    D. The default - information originate command needs to be added under router ospf 1

    E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF


    参考答案：B

  • 第14题：

    Refer to the exhibit. Which th ree commands should be used on router B1 to redistribute the EIGRP AS 10 routes into RIP?()

    A. router rip

    B. router eigrp 10

    C. redistribute eigrp 10

    D. redistribute rip

    E. default - metric 10000 100 255 1 1500

    F. default - metric 5


    参考答案：A, C, F

  • 第15题：

    Refer to the exhibit. Which two statement s are correct?()

    A. All the routes were redistributed into BGP from an IGP

    B. All the routes were originated by BGP with the network command

    C. All six routes will be installed in the routing table

    D. Four routes will be installed in the routing ta ble

    E. Two routes will be installed in the routing table


    参考答案：A, D

  • 第16题：

    Which command will display all the EIGRP feasible successor routes known to a router?()

    A. Router# show ip eigrp routes *

    B. Router# show ip eigrp summary

    C. Router# show ip eigrp topology

    D. Router# show ip eigrp adjacencies

    E. Router# show ip eigrp neighbors detail


    参考答案：C

  • 第17题：

    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）

    • A、R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
    • B、For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
    • C、For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
    • D、No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

    正确答案:B

  • 第18题：

    Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）

    • A、Subnet number
    • B、Next - hop router IP address of the route
    • C、Whether the route is an E1 or E2 route
    • D、The ro ute's tag
    • E、The number of router hops between the router and the subnet

    正确答案:E

  • 第19题：

    Which command will display all the EIGRP feasible successor routes known to a router?（）

    • A、Router# show ip eigrp routes *
    • B、Router# show ip eigrp summary
    • C、Router# show ip eigrp topology
    • D、Router# show ip eigrp adjacencies
    • E、Router# show ip eigrp neighbors detail

    正确答案:C

  • 第20题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    • A、the OSPF route
    • B、the EIGRP route
    • C、the RIPv2 route
    • D、all three routes
    • E、the OSPF and RIPv2 routes

    正确答案:B

  • 第21题：

    多选题
    Refer to the exhibit. Which two statements are correct？ （Choose two.）（）
    A

    All six routes will be installed in the routing table.

    B

    Two routes will be installed in the routing table.

    C

    Four routes will be installed in the routing table.

    D

    All the routes were redistributed into BGP from an IGP.

    E

    All the routes were originated by BGP with the network command.


    正确答案： C,B
    解析： 暂无解析

  • 第22题：

    多选题
    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）
    A

    The router must have one routing protocol configured, but configuration for both routing protocols is not necessary

    B

    The router must hav e at least one working link connected to each routing domain

    C

    The redistribute command must be configured under EIGRP to send the routes to OSPF

    D

    The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF


    正确答案： D,A
    解析： 暂无解析

  • 第23题：

    多选题
    Process OSPF 1 is redistributing routes from process OSPF 2. Which of the following methods may be used to set the metrics of the redistributed routes?（）
    A

    Let the metrics default.

    B

    Use each redistributed route's OSPF metric using the redistribute command's metric transparent keywords.

    C

    Set the metric using the default - metric router subcommand.

    D

    Redistribution is not allowed between two OSPF p rocesses.


    正确答案： C,D
    解析： 暂无解析

相关内容