Which functionality is required within an IP router that is situated at the boundary of an IPv4 network and an IPv6 network to allow communication between IPv6－ only and IPv4 － only nodes?()A. AutoconfigurationB. Automatic 6to4 TunnelC. Automatic 6to4 Rel

题目
Which functionality is required within an IP router that is situated at the boundary of an IPv4 network and an IPv6 network to allow communication between IPv6－ only and IPv4 － only nodes?()

A. Autoconfiguration

B. Automatic 6to4 Tunnel

C. Automatic 6to4 Relay

D. Network Address Translator - Protocol Translator (NAT - PT)

E. Intrasite Automatic T unnel Address Protocol (ISATAP)

相似考题

1.Ipv6 is(71)for "Internet Protocol Version 6"。Ipv6 is the "next generation" protocol design by the IETF to(72)the current version Inernet Protocol, IP Version 4. Most of today's internet uses Ipv4, which is now nearly twenty years old. Ipv4 has been remarkably resilient in spite of its age, but it is beginging to have problems. Most importantly, there is a growing(73)of Ipv4 addresses, which are needed by all new machines added to the Internet. Ipv6 fixs a number of problems in Ipv4, shch as the(74)number of available Ipv4 addresses. It also adds many improvements to Ipv4 in areas such as souting and network autoconfiguration. Ipv6 is expected to gradually replace Ipv4, with the two coexing for a number of years during a transition(75)A.A．shortB．abbreviateC．abbreviationD．initial

2.Refer to the exhibit. Routing updates for the 192.168.1.0 network are being received from all three neighbors. Which statement is correct regarding the result of the con figuration shown? ()A. The router will prefer the next hop of 172.16.1.1 for packets destined for the 192.168.1.0 network.B. The router will prefer the next hop of 172.26.1.1 for packets destined for the 192.168.1.0 network.C. The router will adve rtise the 192.168.1.0 network only to 172.30.1.1.D. The router will advertise the 192.168.1.0 network only to 172.26.1.1.E. The router will prefer the next hop of 172.26.1.1 for packets except those destined for the 192.168.1.0 network.

3.Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? ()A. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E. IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

4.The router SIS-R has been configured in a CIS network. As a network administrator, you were required to enable MPLS on that router.Which of the following description is making sense on the basis of the output information?（）A. CEF switching is only needed to forward labeled packets.B. CEF switching is needed on both ingress and egress interfaces on which MPLS is enabled.C. Interface-level CEF switching is needed only on egress interfaces that are sending IP packets on which the egress LSR performs the label imposition process.D. Interface-level CEF switching is needed only on ingress interfaces that are receiving IP packets on which the ingress LSR performs the label imposition process.

参考答案和解析
参考答案：D
更多“Which functionality is required within an IP router that is situated at the boundary of an IPv4 network and an IPv6 network to allow communication between IPv6－ only and IPv4 － only nodes?() ”相关问题

  • 第1题：

    When is it necessary to use a public IP address on a routing interface?()

    A. Connect a router on a local network.

    B. Connect a router to another router.

    C. Allow distribution of routes between networks.

    D. Translate a private IP address.

    E. Connect a network to the Internet.


    参考答案：E

  • 第2题：

    In what situation would the command ip helper-address be required？（Choose the best answer.）（）

    • A、Only when there is a duplicate IP address caused by a combination of static and dynamic IPaddress allocations
    • B、On each router that exists between the client and the server
    • C、Only when a router separates the client from the server
    • D、Only if the DHCP sever issues a DHCPNAK to the initial request
    • E、Only when the client is on the same subnet as the server
    • F、Only when the DHCP pool is out of IP addresses

    正确答案:C

  • 第3题：

    Which OSPF network type is ideal for partially meshed NBMA networks because it is easy to configure（requires no configuration of neighbor commands）， consumes only one IP subnet， and requires no designated router election？


    正确答案:Point-to-multipoint.

  • 第4题：

    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）

    • A、 Tunnel IPv6 over IPv4 to connect far-end IPv6 networks
    • B、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible
    • C、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible
    • D、 What is the meaning of EUI-64 and how does it work？
    • E、 Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.

    正确答案:A,C,D

  • 第5题：

    Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）

    • A、Only OSPF version 3 can be utilized for routing IPv4 and IPv6
    • B、IPv4 and IPv6 networks can be routed simultaneously
    • C、IPv6 can be routed using the same routing protocol versions as IPv4
    • D、A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them
    • E、None of the other alternatives apply

    正确答案:B

  • 第6题：

    Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6？（）

    • A、Dual stack
    • B、NAT
    • C、Flow label
    • D、Mobile IP
    • E、6to4 tunneling
    • F、Anycast
    • G、MBGP

    正确答案:A,B,E

  • 第7题：

    For NIM to install client machines located in a non-adjacent network， which routing must be defined？（）  

    • A、Boot/install servers will be required on each intermediate network.
    • B、When an install is initiated by the client， routing is only required from the LPAR back to the NIM master.
    • C、When an install is initiated by the NIM master， routing is only required from the NIM master to the client.
    • D、Appropriate network NIM resources need to be defined to the NIM master to allow routing in both directions.

    正确答案:D

  • 第8题：

    多选题
    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）
    A

    Tunnel IPv6 over IPv4 to connect far-end IPv6 networks

    B

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible

    C

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible

    D

    What is the meaning of EUI-64 and how does it work？

    E

    Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.


    正确答案： C,D
    解析： 暂无解析

  • 第9题：

    单选题
    Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）
    A

    Only OSPF version 3 can be utilized for routing IPv4 and IPv6

    B

    IPv4 and IPv6 networks can be routed simultaneously

    C

    IPv6 can be routed using the same routing protocol versions as IPv4

    D

    A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them

    E

    None of the other alternatives apply


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    Which functionality is required within an IP router that is situated at the boundary of an  IPv4 network and an IPv6 network to allow communication between IPv6- only and IPv4 - only nodes?（）
    A

    Autoconfiguration

    B

    Automatic 6to4 Tunnel

    C

    Automatic 6to4 Relay

    D

    Network Address Translator - Protocol Translator (NAT - PT)

    E

    Intrasite Automatic T unnel Address Protocol (ISATAP)


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）
    A

    a router with subinterfaces configured on the physical interface that is connected to the switch

    B

    a router with an IP address on the physical interface connected to the switch

    C

    a switch with an access link that is configured between the switches

    D

    a switch with a trunk link that is configured between the switches


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    Which of the following solutions will encapsulate IPv6 packets with IPv4 headers？（）
    A

    Create an IPv4 tunnel and assign the tunnel IPv6 addresses

    B

    Create IPv4 interfaces on both ends of the network， and use either static routes or a routingprocess to direct IPv6 packets through those interfaces

    C

    IPv6 packets cannot be encapsulated with IPv4 headers because the addresses are notcompatible

    D

    Create IFV6 interfaces on both ends of the network， and use static routes to point the IPv4address to those interfaces

    E

    Use an IPv6 routing protocol like OSPFv3 and assign IPv4 packets to that process

    F

    Create an IPv4 tunnel and use the tunnel mode ipv6ip command


    正确答案： D
    解析： 暂无解析

  • 第13题：

    IPv6 is short for "Internet Protocol Version 6". IPv6 is the "next generation" protocol designed by the IETF to(71) the current version Internet Protocol, IP version 4("IPv4").

    Most of today's internet uses IPv4, which is now more than twenty years old. IPv4 has been(72) resilient in spite of its age, but it is beginning to have problems. Most importantly, there is a growing(73) of IPv4 addresses, which are needed by all new machines added to the Internet. IPv6 fixes a number of problems in IPv4, such as the(74) number of available IPv4 addresses. It also adds many improvements to IPv4 in areas such as routing and network autoconfiguration. IPv6 is expected to gradually replace IPv4, with the two coexisting for a number of years during a transition(75) .

    A．substitution

    B．swap

    C．switchover

    D．replace


    正确答案：D

  • 第14题：

    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）

    • A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.
    • B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.
    • C、Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.
    • D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.
    • E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

    正确答案:A,C

  • 第15题：

    Which of the following solutions will encapsulate IPv6 packets with IPv4 headers？（）

    • A、Create an IPv4 tunnel and assign the tunnel IPv6 addresses
    • B、Create IPv4 interfaces on both ends of the network， and use either static routes or a routingprocess to direct IPv6 packets through those interfaces
    • C、IPv6 packets cannot be encapsulated with IPv4 headers because the addresses are notcompatible
    • D、Create IFV6 interfaces on both ends of the network， and use static routes to point the IPv4address to those interfaces
    • E、Use an IPv6 routing protocol like OSPFv3 and assign IPv4 packets to that process
    • F、Create an IPv4 tunnel and use the tunnel mode ipv6ip command

    正确答案:F

  • 第16题：

    Which functionality is required within an IP router that is situated at the boundary of an  IPv4 network and an IPv6 network to allow communication between IPv6- only and IPv4 - only nodes?（）

    • A、Autoconfiguration
    • B、Automatic 6to4 Tunnel
    • C、Automatic 6to4 Relay
    • D、Network Address Translator - Protocol Translator (NAT - PT)
    • E、Intrasite Automatic T unnel Address Protocol (ISATAP)

    正确答案:D

  • 第17题：

    When is it necessary to use a public IP address on a routing interface?（）

    • A、Connect a router on a local network.
    • B、Connect a router to another router.
    • C、Allow distribution of routes between networks.
    • D、Translate a private IP address.
    • E、Connect a network to the Internet.

    正确答案:E

  • 第18题：

    On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）

    • A、a router with subinterfaces configured on the physical interface that is connected to the switch
    • B、a router with an IP address on the physical interface connected to the switch
    • C、a switch with an access link that is configured between the switches
    • D、a switch with a trunk link that is configured between the switches

    正确答案:A

  • 第19题：

    You are a network adminstrator for your company. You install an intranet application on three Windows Server 2003 computers. You configure the servers as a Network Load Balancing cluster. You configure each server with two network adapters. One network adapter provides client computers access to the servers. The second network adapter is for cluster communications. Cluster communications is on a separate network segment.   The network team wants to reduce the cluster’s vulnerability to attack. These servers need to be highly available. The network team decides that the Network Load Balancing cluster needs to filter IP ports. The team wants the cluster to allow only the ports that are required for the intranet application.   You need to implement filtering so that only the intranet application ports are available on the cluster. You need to achieve this goal by using the minimum amount of administrative effort.   What should you do？  （）

    • A、 Use Network Load Balancing Manager to configure port rules. Allow only the intranet application ports on the cluster IP address.
    • B、 Use TCP/IP filtering on each server. Configure only the intranet application ports on the network adapter that provides client computers access to the servers.
    • C、 Use TCP/IP filtering on each server. Configure only the intranet application ports on both of the network adapters.
    • D、 Configure Routing and Remote Access on each server. Use Routing and Remote Access input filters to allow only the intranet application ports on the network adapter that provides client computers access to the servers.

    正确答案:A

  • 第20题：

    多选题
    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）
    A

    IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.

    B

    IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.

    C

    Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.

    D

    Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.

    E

    IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.


    正确答案： C,A
    解析： 暂无解析

  • 第21题：

    单选题
    You are a network adminstrator for your company. You install an intranet application on three Windows Server 2003 computers. You configure the servers as a Network Load Balancing cluster. You configure each server with two network adapters. One network adapter provides client computers access to the servers. The second network adapter is for cluster communications. Cluster communications is on a separate network segment.   The network team wants to reduce the cluster’s vulnerability to attack. These servers need to be highly available. The network team decides that the Network Load Balancing cluster needs to filter IP ports. The team wants the cluster to allow only the ports that are required for the intranet application.   You need to implement filtering so that only the intranet application ports are available on the cluster. You need to achieve this goal by using the minimum amount of administrative effort.   What should you do？  （）
    A

     Use Network Load Balancing Manager to configure port rules. Allow only the intranet application ports on the cluster IP address.

    B

     Use TCP/IP filtering on each server. Configure only the intranet application ports on the network adapter that provides client computers access to the servers.

    C

     Use TCP/IP filtering on each server. Configure only the intranet application ports on both of the network adapters.

    D

     Configure Routing and Remote Access on each server. Use Routing and Remote Access input filters to allow only the intranet application ports on the network adapter that provides client computers access to the servers.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    多选题
    In IPv6 network, an IPv6 overlay tunnel is required to communicate with isolated IPv6 networks across the existing IPv4 infrastructurE. There are currently fiv e IPv6 overlay tunnel types. Which three IPv6 overlay tunnel statements are true？（）
    A

    Overlay tunnels can only be configured between border routers capable of supporting IPv4 and IPv6.

    B

    An manual overlay tunnel supports point - to - multipo int tunnels capable of carrying IPv6 and Connectionless Network Service (CLNS) packets.

    C

    Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.

    D

    Overlay tunnels can be configured between border route rs or between a border router and a host capable of supporting IPv4 and IPv6.

    E

    Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4 - compatible, 6to4, and Intra - Site Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechan isms.

    F

    Cisco IOS supports manual, generic routing encapsulation (GRE), IPv6 - compatible, 4to6, and Multiprotocol Label Switching (MPLS) overlay tunneling mechanisms.


    正确答案： F,B
    解析： 暂无解析

  • 第23题：

    多选题
    Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6？（）
    A

    Dual stack

    B

    NAT

    C

    Flow label

    D

    Mobile IP

    E

    6to4 tunneling

    F

    Anycast

    G

    MBGP


    正确答案： G,B
    解析： 暂无解析

相关内容