A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?()A. Router(config-if)# encapsulation frame-relay q933aB. Router(con

题目
A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?()

A. Router(config-if)# encapsulation frame-relay q933a

B. Router(config-if)# encapsulation frame-relay ansi

C. Router(config-if)# encapsulation frame-relay ietf

D. Router(config-if)# encapsulation frame-relay isl

E. None of the above

相似考题

1.You are troubleshooting a frame relay connection and wish to view the LMI traffic stats. Which command should you issue?()A. Show interface lmiB. Show frame-relay lmiC. Show interface frame-relayD. Debug frame-relay interface.

2.It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit.Which of the following processes are required to accomplish this task?()A. configure static frame relay map entries for each subinterface network.B. remove the ip address from the physical interfaceC. create the virtual interfaces with the interface commandD. configure each subinterface with its own IP addressE. disable split horizon to prevent routing loops between the subinterface networksF. encapsulate the physical interface with multipoint PPP

3.A network administrator needs to allow only one Telnet connection to a router. For anyone viewing the configuration and issuing the show run command, the password for Telnet access should be encrypted. Which set of commands will accomplish this task?（）A.B.C.D.

4.Users have been complaining that their Frame Relay connection to the corporate site is very slow. The network administrator suspects that the link is overloaded. Based on the partial output of the Router show frame relay pvc command shown in the graphic, which output value indicates to the local router that traffic sent to the corporate site is experiencing congestion?（）A. DLCI = 100B. last time PVC status changed 00:25:40C. in BECN packets 192D. in FECN packets 147E. in DE packets 0

更多“A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?() ”相关问题

  • 第1题：

    A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router.How should the network administrator configure the serial interface of the main office router to make the connection?（）

    A.

    B.

    C.

    D.


    参考答案：B

  • 第2题：

    A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?（）

    • A、Router(config-if)# encapsulation frame-relay q933a
    • B、Router(config-if)# encapsulation frame-relay ansi
    • C、Router(config-if)# encapsulation frame-relay ietf
    • D、Router(config-if)# encapsulation frame-relay isl
    • E、None of the above

    正确答案:C

  • 第3题：

    A new frame relay connection is being brought up. Which of the following are frame relay LMI type options that can be configured on this new link?（）

    • A、EIA/TIA
    • B、Q.932
    • C、Q.933A
    • D、IEEE
    • E、Cisco
    • F、Annex D

    正确答案:C,E,F

  • 第4题：

    Customer X has a hub-and-spoke Frame Relay network， with a central office and two branch offices （RemoteA and RemoteB）. Each location has only one physical link to the Frame Relay cloud and RemoteB has a router that is not a Cisco router. Since the installation， there is no connectivity between RemoteB and the central office. What is a possible solution to this issue？ （）

    • A、 Because Frame Relay IETF encapsulation is only configurable at interface level， you must use IETF encapsulation on all routers.
    • B、 This is not a possible scenario. A dedicated Frame Relay link to RemoteB is mandatory at the central office.
    • C、 The router at RemoteB must be replaced by a Cisco router.
    • D、 Use Frame Relay IETF encapsulation on a per-VC basis on the central office router.
    • E、 There is a problem in the Frame Relay cloud， because Cisco routers are compatible with IETF Frame Relay.

    正确答案:D

  • 第5题：

    How should a router that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?（）

    • A、Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface.
    • B、Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic.
    • C、Configure many sub-interfaces on the same subnet.
    • D、Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces.

    正确答案:A

  • 第6题：

    A user reports they cannot access the network share folder， the users workstation is configured to use automatic IP. When the administrator checks the IP address the response returns as 169.254.0.5. Which of the following should the administrator verify？（）

    • A、 That there are no DHCP relay servers
    • B、 That the user account on Active Directory is not locked
    • C、 That the network card driver is not installed incorrectly
    • D、 The network connection is functioning

    正确答案:D

  • 第7题：

    You are a network administrator for your company. The network consists of a single Active Directory domain. All domain controllers and member servers run Windows Server 2003， Enterprise Edition. All client computers run Windows XP Professional.   The company has one main office and one branch office. The two offices are connected by a T1 WAN connection. There is a hardware router at each end of the connection. The main office contains 10，000 client computers， and the branch office contains 5，000 client computers.   You need to use DHCP to provide IP addresses to the Windows XP Professional computers in both offices. You need to minimize network configuration traffic on the WAN connection. Your solution needs to prevent any component involved in the DHCP architecture from becoming a single point of failure.   What should you do？  （）

    • A、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. Configure the branch office router as a DHCP relay agent.
    • B、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure a Windows Server 2003 computer as a DHCP relay agent.
    • C、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure two Windows Server 2003 computers as a DHCP server cluster.
    • D、 At the main office， configure two Windows Server 2003 computers as DHCP servers. Configure one DHCP server to handle 80 percent of the IP address scope and the other DHCP server to handle 20 percent. Configure the branch office router as a DHCP relay agent.

    正确答案:C

  • 第8题：

    单选题
    Which of the following Frame-Relay encapsulation commands would you use, if you had to connect your Cisco router to a non-Cisco router?（）
    A

    TestKRouter(config-if)# Encapsulation frame-relay dot1q

    B

    TestKRouter(config-if)# Encapsulation frame-relay aal5snap

    C

    TestKRouter(config-if)# Encapsulation frame-relay ietf

    D

    TestKRouter(config-if)# Encapsulation frame-relay isl

    E

    None of the above


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?（）
    A

    Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252  Main(config-if)#no shut

    B

    Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252  Main(config-if)#encapsulation ietf Main(config-if)#no shut

    C

    Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252  Main(config-if)#encapsulation frame-relay  Main(config-if)#authenication chap Main(config-if)#no shut

    D

    Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252   Main(config-if)#encapsulation ppp Main(config-if)#no shut


    正确答案： B
    解析： 暂无解析

  • 第10题：

    多选题
    It has become necessary to configure an existing serial interface to accept a second Frame Relay virtualcircuit.Which of the following processes are required to accomplish this task？（）
    A

    configure static frame relay map entries for each subinterface network.

    B

    remove the ip address from the physical interface

    C

    create the virtual interfaces with the interface command

    D

    configure each subinterface with its own IP address

    E

    disable split horizon to prevent routing loops between the subinterface networks

    F

    encapsulate the physical interface with multipoint PPP


    正确答案： F,B
    解析： 暂无解析

  • 第11题：

    单选题
    A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?（）
    A

    Router(config-if)# encapsulation frame-relay q933a

    B

    Router(config-if)# encapsulation frame-relay ansi

    C

    Router(config-if)# encapsulation frame-relay ietf

    D

    Router(config-if)# encapsulation frame-relay isl

    E

    None of the above


    正确答案： E
    解析： 暂无解析

  • 第12题：

    多选题
    A new frame relay connection is being brought up. Which of the following are frame relay LMI type options that can be configured on this new link?（）
    A

    EIA/TIA

    B

    Q.932

    C

    Q.933A

    D

    IEEE

    E

    Cisco

    F

    Annex D


    正确答案： F,B
    解析： 暂无解析

  • 第13题：

    Which of the following Frame-Relay encapsulation commands would you use, if you had to connect your Cisco router to a non-Cisco router?（）

    • A、TestKRouter(config-if)# Encapsulation frame-relay dot1q
    • B、TestKRouter(config-if)# Encapsulation frame-relay aal5snap
    • C、TestKRouter(config-if)# Encapsulation frame-relay ietf
    • D、TestKRouter(config-if)# Encapsulation frame-relay isl
    • E、None of the above

    正确答案:C

  • 第14题：

    How should a router that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?（）

    • A、Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the subinterface B
    • B、Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
    • C、Configure many sub-interfaces on the same subnet
    • D、Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces

    正确答案:A

  • 第15题：

    Which WAN connection requires a different interface than the standard interface provided in the Cisco Single-Site Secure Network Foundation deployment design？（）

    • A、Metro Ethernet
    • B、DSL
    • C、VPN
    • D、Cable
    • E、Frame-Relay

    正确答案:E

  • 第16题：

    It has become necessary to configure an existing serial interface to accept a second Frame Relay virtualcircuit.Which of the following processes are required to accomplish this task？（）

    • A、configure static frame relay map entries for each subinterface network.
    • B、remove the ip address from the physical interface
    • C、create the virtual interfaces with the interface command
    • D、configure each subinterface with its own IP address
    • E、disable split horizon to prevent routing loops between the subinterface networks
    • F、encapsulate the physical interface with multipoint PPP

    正确答案:B,C,D

  • 第17题：

    How should a router that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates？（）

    • A、Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface
    • B、Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
    • C、Configure many sub-interfaces on the same subnet
    • D、Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces

    正确答案:A

  • 第18题：

    A technician temporarily needs an additional network connection in their office to test a newworkstation. Which of the following is the BEST solution to add a temporary network connection?（）

    • A、Install a small network switch
    • B、Use port mirroring on the switch
    • C、Split the pairs of the existing jack
    • D、Install a CSU/DSU

    正确答案:A

  • 第19题：

    You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.  You need to configure the wireless connection to allow your computer to discover other computers.  What should you do？（）

    • A、Configure the network category of your wireless network connection to Private.
    • B、Configure the network category of your wireless network connection to Public.
    • C、Configure the TCP/IP packet filtering on the wireless network connection.
    • D、Configure the wireless network connection with the appropriate authentication to the router.

    正确答案:A

  • 第20题：

    单选题
    A user reports they cannot access the network share folder， the users workstation is configured to use automatic IP. When the administrator checks the IP address the response returns as 169.254.0.5. Which of the following should the administrator verify？（）
    A

     That there are no DHCP relay servers

    B

     That the user account on Active Directory is not locked

    C

     That the network card driver is not installed incorrectly

    D

     The network connection is functioning


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Which WAN connection requires a different interface than the standard interface provided in the Cisco Single-Site Secure Network Foundation deployment design？（）
    A

    Metro Ethernet

    B

    DSL

    C

    VPN

    D

    Cable

    E

    Frame-Relay


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You are troubleshooting a frame relay connection and wish to view the LMI traffic stats. Which command should you issue?（）
    A

    Show interface lmi

    B

    Show frame-relay lmi

    C

    Show interface frame-relay

    D

    Debug frame-relay interface.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.  You need to configure the wireless connection to allow your computer to discover other computers.  What should you do？（）
    A

    Configure the network category of your wireless network connection to Private.

    B

    Configure the network category of your wireless network connection to Public.

    C

    Configure the TCP/IP packet filtering on the wireless network connection.

    D

    Configure the wireless network connection with the appropriate authentication to the router.


    正确答案： A
    解析： 暂无解析

相关内容