An engineer has added the following configuration snippet to an implementation planning document. The configuration will be added to Router R1, whose Fa0/0 interface connects to a LAN to which Routers R2 and R3 also connect. R2 and R3 are already EIGRP neighbors with each of her. Assuming the snippet shows all commands on R1 related to EIGRP authentication, which answer lists an appropriate comment to be made during the implementation plan peer review?()key chain fredkey 3key - string whehewinterface fa0/0ip authenticat ion key - chain eigrp 9 fred
A.The configuration is missing one authentication - related configuration command
B.The configuration is missing two authentication - related configuration commands
C.Authentication type 9 is not supported; type 5 should be u sed insteaD
D.The key numbers must begin with key 1, so change the key 3 command to key 1
第1题:
A. Update the configuration logs
B. Update the network wiring schematics
C. Update the network configuration procedures
D. Compare the configuration with the baseline
第2题:
An engineer is reviewing another engineer‘s sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?()
A. tunnel source
B. tunnel destination
C. tunnel mode
D. All these commands are requireD
第3题:
The following configuration commands exist only in an implementation plan document. An engineer does a copy/paste of these commands into configuration mode on Router R1. Which of the following answers is m ost accurate regarding the results?()ip sla1icmp - echo 1.1.1.1 source -ip 2.2.2.2ip sla schedule 1 start - time now life forever
A. The SLA operation will be configured but will not start until additional commands are used
B. The SLA operation is not comp letely configured so it will not collect any datA
C. The SLA operation is complete and working, collecting data into the RTTMON MIB
D. The SLA operation is complete and working but will not store the data in the RTTMON MIB without more configuration
第4题:
A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router,as the routing protocol for the network.Which statement about thisnetwork is true?()
第5题:
A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?()
第6题:
The following configuration exists on a router on one end of an IPv6 tunnel. Although the configuration added so far is correct, the configuration is incomplete. Which type of tunnel is most likely to be intended by the network engineer?() interface loopback 1 ip address 192.168.1.1 255.255.255.255 interface tunnel 2 ipv6 address 2002:C0A8:10 1::1/64 tunnel source loopback 1
第7题:
Which of these is an accurate list of Cisco Lifecycle Services phases? Select exactly 1 answer(s) from the following:()。
第8题:
An administrator has recently added a VLAN to the VIO server and wants to update the documentation. Which command displays the current VIO server VLAN configuration?()
第9题:
Company.com with an EtherChannel implementation is considering an HACMP solution. What considerations must be addressed in planning this configuration?()
第10题:
The SLA operation will be configured but will not start until additional commands are used
The SLA operation is not comp letely configured so it will not collect any datA
The SLA operation is complete and working, collecting data into the RTTMON MIB
The SLA operation is complete and working but will not store the data in the RTTMON MIB without more configuration
第11题:
initiation planning analysis design development implementation operations and maintenance
project planning, site assessment risk assessment solution selection and acquisition, testing, and operations
prepare, plan, design, implement operate, and optimize
analysis, design, deployment testing, implementation, and production
presales, project planning, development implementation, operations testing, and operations sign- off
第12题:
Configuring the neighbor weight command on Ent1.
Having the ISPs configure the neighbor route - map out command on ISP1 and ISP2, with the route map setting weight.
Configuring the set weight command inside a route map on Router Ent1.
Configuring a prefix list to match all class C networks.
第13题:
A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?()
A.VLAN
B.zoning
C.trunking
D.LUN masking
第14题:
An engineer is preparing an implementation plan in which the configuration needs to influence BGP‘s choice of best path.Which of the following is least likely to be used by the configuration in this imple mentation plan?()
A. Weight
B. Origin code
C. AS_Path
D. Local_Pref
第15题:
An engineer has added the following configuration snippet to an implementation planning document. The configuration will be added to Router R1, whose Fa0/0 interface connects to a LAN to which Routers R2 and R3 also connect. R2 and R3 are already EIGRP neighbors with each of her. Assuming the snippet shows all commands on R1 related to EIGRP authentication, which answer lists an appropriate comment to be made during the implementation plan peer review?() key chain fred key 3 key - string whehew interface fa0/0 ip authenticat ion key - chain eigrp 9 fred
第16题:
Enterprise Router R1 connects an Enterprise to the Internet. R1 needs to create and advertise a default route into the Enterprise using EIGRP. The engineer creating the implementation plan has chosen to base this default route on the ip route command, rather than using i p default - network. Which of the following is not a useful step with this style of default route configuration?()
第17题:
Router R1 has been configured with the commands rout er eigrp 9 and network 172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1's (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode. Which of the following occurs?()
第18题:
An engineer is preparing an implementation plan in which the configuration needs to influence BGP's choice of best path. Which of the following is least likely to be used by the configuration in this imple mentation plan?()
第19题:
A user’s workstation currently has four connected IDE devices. Which of the following could be added to the workstation to allow more ATA devices to be added to the workstation?()
第20题:
A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2. Which of the following must be added, if anything, to the configuration to support four LPARs, assuming each LPAR requires twodisk drives?()
第21题:
You work as an application developer at Certkiller .com. Certkiller .com has instructed you to create a class named MetricFormula. This class will be used to compare MetricUnit and EnglishUnit objects.The MetricFormula is currently defined as follows (Line numbers are used for reference purposes only): 1. public class MetricFormula2. { 3. 4. } You need to ensure that the MetricFormula class can be used to compare the required objects. What should you do? ()
第22题:
The configuration is missing one authentication - related configuration command
The configuration is missing two authentication - related configuration commands
Authentication type 9 is not supported; type 5 should be u sed insteaD
The key numbers must begin with key 1, so change the key 3 command to key 1
第23题:
Update the configuration logs
Update the network wiring schematics
Update the network configuration procedures
Compare the configuration with the baseline
第24题:
tunnel source
tunnel destination
tunnel mode
All these commands are requireD