Refer to the exhibit. Which two conclusions can be drawn from the debug ip igmp output?()A. The router sent an IGMP version 2 query out interface Ethernet1 at multicast address 224.0.0.1.B. Router RTA received an IGMP report version 1 from host 192.168.9.

题目
Refer to the exhibit. Which two conclusions can be drawn from the debug ip igmp output?()

A. The router sent an IGMP version 2 query out interface Ethernet1 at multicast address 224.0.0.1.

B. Router RTA received an IGMP report version 1 from host 192.168.9.1.

C. Reverse Path Forwarding (RPF) is ena bled for 192.168.9.4.

D. Reverse Path Forwarding (RPF) is enabled for 224.0.1.40.

E. The IP multicast groups are 224.0.0.1, 224.0.1.40, and 239.255.0.1.

F. IP PIM RP mapping is static.

相似考题

1.Refer to the exhibit. This shows the NetFlow statistics for a router. You are analyzing the traffic pattern and you are interested in the percentage of packets between 32 and 64 bytes in size and the number of flows in progress. Which of these identifies both numbers correctly?（）A. 69.4%, 4061B. 24.9%, 980C. 69.4%, 35D. 6.94%, 980E. cannot be determined from this output

2.Refer to the exhibit. Router RTA has been configured as a DHCP server. The two debug commands will generate output on RTA when Ho st A requests an IP address. Which set of DHCPD debug messages is in the correct sequence?（）A.DHCPD: Sending DHCPOFFER to client DHCPD: DHCPDISCOVER received from client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPACK to clientB.DH CPD: DHCPDISCOVER received from client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPOFFER to client DHCPD: Sending DHCPACK to clientC.DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPACK to clientD.DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPACK to clientE.DHCPD: Sending DHCPACK to client DHCPD: DHCPD ISCOVER received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from clientF.DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPACK to client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from client

3.Refer to the exhibit. A network administrator has configured DHCP services on the router asshown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses.Which two statements contain recommendations that will solve the problem?（）A.The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0B.A second DHCP pool for network 10 .10.0.0/24 should be configuredC.An ip dhcp excluded - address global configuration command for network 10.10.0.0/24 should be issuedD.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/0 c onfigurationE.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/1 configuration

4.The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?（）Network Next Hop Metric LocPrf Weight Path* 130.1.1.0/28 1.1.1.1 0 1 2 3 4 iA. The route is learne d from an eBGP peerB. The route has no more than three ASNs in the AS_PatHC. The route is the best route for this prefixD. None of these facts can be positively determined by this output

参考答案和解析
参考答案：A, B
更多“Refer to the exhibit. Which two conclusions can be drawn from the debug ip igmp output?() ”相关问题

  • 第1题：

    Refer to the exhibit. Which command would verify if PBR reacts to packets sourced from 172.16.0.0／16?()

    A. show ip route

    B. show policy - map

    C. show access - lists

    D. show route - map


    参考答案：D

  • 第2题：

    Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?()

    A. traffic - share balanced

    B. distance

    C. maximum- paths

    D. default - network

    E. variance


    参考答案：C, E

  • 第3题：

    Refer to the exhibit. Which statement is true about the router configuration that is shown ?Select the best response.()

    A. Additional DHCP options will be imported from another DHCP server.

    B. The DHCP server pools need to be bound to an interface to operate.

    C. This configuration will provide IP configuration information to two different su bnets.

    D. Additional DCHP option information needs to be imported from another DHCP server.

    E. If the router hands out all the addresses in pool 1, then it will supply addresses from pool 2.


    参考答案：C

  • 第4题：

    Refer to the exhibit. This network is running IS － IS. Router RTC is inside Cloud1. From the output on RTD, which two statement s are true?()

    A.Because it is running IS - IS in IP - only mode, RTD will not transmit CLNS packets

    B.IP routing updates between RTC and RTD will be IP datagrams that are encapsulated by HDLC

    C.The SNPA for RTE is the source data link address that is used to transmit frames to RTD

    D.IP routing updates between RTC and RTD will be CLNS datagrams that are encapsulated by HDLC

    E.The NET for RTE will be 49.0150.0019.06b7.fd5f.00

    F.IP routing updates between RTC and RTD will be IP datagrams that a re encapsulated by CLNS


    参考答案：C, D

  • 第5题：

    Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?()

    A.data link layer

    B.application layer

    C.access layer

    D.session layer

    E.network layer


    参考答案：E

  • 第6题：

    What can be determined from the line of show ip route output shown in the exhibit?（）

    • A、The next routing update can be expected in 35 seconds.
    • B、The IP address 10.10.10.6 is configured on S0/1.
    • C、The IP address 10.10.10.8 is configured on S0/1.
    • D、This route is using the default administrative distance.
    • E、The 10.10.10.8 network is two hops away from this router.

    正确答案:D,E

  • 第7题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is shown？（）

    • A、Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router
    • B、The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address10.10.0.1
    • C、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.1
    • D、DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2
    • E、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.6

    正确答案:A,E

  • 第8题：

    多选题
    Refer to the exhibit. Which two statements are correct？ （Choose two.）（）
    A

    All six routes will be installed in the routing table.

    B

    Two routes will be installed in the routing table.

    C

    Four routes will be installed in the routing table.

    D

    All the routes were redistributed into BGP from an IGP.

    E

    All the routes were originated by BGP with the network command.


    正确答案： C,B
    解析： 暂无解析

  • 第9题：

    多选题
    What can be determined from the line of show ip route output shown in the exhibit?（）
    A

    The next routing update can be expected in 35 seconds.

    B

    The IP address 10.10.10.6 is configured on S0/1.

    C

    The IP address 10.10.10.8 is configured on S0/1.

    D

    This route is using the default administrative distance.

    E

    The 10.10.10.8 network is two hops away from this router.


    正确答案： E,C
    解析： 暂无解析

  • 第10题：

    单选题
    Which of these is a benefit of ESM?（）
    A

    supports multiple MIBs

    B

    includesNetFlow, NBAR, and IP SLA software subsystems

    C

    includesNetFlow, syslog, and IP SLA software subsystems

    D

    includes a predefined framework for filtering and correlating messages

    E

    supports two logging processes so output can be sent in standard and ESM format


    正确答案： A
    解析： 暂无解析

  • 第11题：

    多选题
    Refer to the exhibit. A junior network administrator was given the task of configuring port security on SwitchA to allow only PC_A to access the switched network through port fa0/1. If any other device is detected, the port is to drop frames from this device. The administrator configured the interface and tested it with successful pings from PC_A to RouterA, and then observes the output from these two show commands.Which two of these changes are necessary for SwitchA to meet the requirements? （）
    A

    Port security needs to be globally enabled.

    B

    Port security needs to be enabled on the interface.

    C

    Port security needs to be configured to shut down the interface in the event of a violation.

    D

    Port security needs to be configured to allow only one learned MAC address.

    E

    Port security interface counters need to be cleared before using the show command.

    F

    The port security configuration needs to be saved to NVRAM before it can become active.


    正确答案： E,B
    解析： 暂无解析

  • 第12题：

    单选题
    Refer to the exhibit. Which of the following IOS DHCP configuration statements is required so that a Cisco skinny-based IP phone can connect with CallManager?（）
    A

    ip dhcp pool Client

    B

    network 10.1.1.0 255.255.255.240

    C

    default-router 10.1.1.1

    D

    dns-server 10.2.2.2

    E

    domain-name cisco.com

    F

    option 150 ip 10.3.3.3


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. Which two Cisco IOS commands on R2 would verify its OSPF neighbor relationships?()

    A.show ip ospf

    B.show ip ospf interface

    C.show ip ospf neighbor

    D.show ip ospf database

    E.show ip ospf statistics

    F.show running - config begin router ospf


    参考答案：B, C

  • 第14题：

    Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）

    A. All OSPF implementations must have at le ast one interface in area 0.

    B. You are attempting to run in the broadcast mode over an NBMA interface.

    C. Both routers are configured to function as a BDR; therefore, there is no DR router.

    D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.

    E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.


    参考答案：E

  • 第15题：

    Refer to the exhibit. On the basis of the output, what two conclusions can be reached?()

    A. The default administrative distance has been changed.

    B. IS - IS is not enabled.

    C. Three physical interfaces are taking part in integrated IS - IS.

    D. IS - IS is not redistributing any oth er routing protocols.

    E. There are two neighboring routers sending IS - IS routing information.

    F. Address summarization is configured.


    参考答案：D, E

  • 第16题：

    Refer to the exhibit. Which two statement s are correct?()

    A. All the routes were redistributed into BGP from an IGP

    B. All the routes were originated by BGP with the network command

    C. All six routes will be installed in the routing table

    D. Four routes will be installed in the routing ta ble

    E. Two routes will be installed in the routing table


    参考答案：A, D

  • 第17题：

    Refer to the exhibit. What can be determined about the router from the console output?()

    A.No configuration file was found in NVRAM.

    B.No configuration file was found in flash.

    C.No configuration file was found in the PCMCIA card.

    D.Configuration file is normal and will load in 15 seconds.


    参考答案：B

  • 第18题：

    Which of these is a benefit of ESM?（）

    • A、supports multiple MIBs
    • B、includesNetFlow, NBAR, and IP SLA software subsystems
    • C、includesNetFlow, syslog, and IP SLA software subsystems
    • D、includes a predefined framework for filtering and correlating messages
    • E、supports two logging processes so output can be sent in standard and ESM format

    正确答案:E

  • 第19题：

    Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?（）

    • A、The address is removed from the pool until the conflict is resolved.
    • B、The address remains in the pool until the conflict is resolved.
    • C、Only the IP detected by Gratuitous ARP is removed from the pool.
    • D、Only the IP detected by Ping is removed from the pool.
    • E、The IP will be shown, even after the conflict is resolved.

    正确答案:A

  • 第20题：

    单选题
    Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?（）
    A

    data link layer

    B

    application layer

    C

    access layer

    D

    session layer

    E

    network layer


    正确答案： E
    解析： 暂无解析

  • 第21题：

    多选题
    Refer to the exhibit. Which two statements are correct？（）
    A

    All six routes will be installed in the routing table

    B

    Two routes will be installed in the routing table

    C

    Four routes will be installed in the routing table

    D

    All the routes were redistributed into BGP from an IGP

    E

    All the routes were originated by BGP with the network command


    正确答案： A,B
    解析： 暂无解析

  • 第22题：

    多选题
    Refer to the exhibit. On the basis of the information in the exhibit， which two statements are true？（）
    A

    When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose2 because of the higher MED value of SanJose2

    B

    The serial 0/0/1 interface on the ISP router has been configured with the set metric 50command

    C

    The output was generated by entering the show ip bgp command on the SanJose1 router

    D

    The output was generated by entering the show ip bgp command on the ISP router

    E

    The serial 0/0/1 interface on the ISP router has been configured with the set metric 75command

    F

    When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose1 because of the lower MED value of SanJose1


    正确答案： A,E
    解析： 暂无解析

  • 第23题：

    单选题
    The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?（） Network Next Hop Metric LocPrf Weight Path * 130.1.1.0/28 1.1.1.1 0 1 2 3 4 i
    A

    The route is learne d from an eBGP peer

    B

    The route has no more than three ASNs in the AS_PatH

    C

    The route is the best route for this prefix

    D

    None of these facts can be positively determined by this output


    正确答案： A
    解析： 暂无解析

相关内容