The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?()A. The default administrative distance is used.B. The command is u

题目
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?()

A. The default administrative distance is used.

B. The command is used to establish a static route.

C. The command is used to configure the router interfaces.

D. The command is used to establish a stub network.

E. The subnet mask for the source address is 255.255.255.0

相似考题

1.Which two statements are true regarding rescue configurations?()A. Once saved, a rescue configuration is loaded using the rollback 0 command.B. The rescue configuration must contain the minimal elements necessary to restore network connectivity.C. A minimal rescue configuration is defined by default.D. A rescue configuration must include a root password.

2.Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.

3.Which three statements are true about EIGRP route summarization?()A.When manual summarization is configured, the router immediately creates a route that points to null0 interfaceB.Manual route summarization is configured in router configuration mode when the router is configured for EIGRP routingC.Manual route summarization is configured on the interfaceD.The ip summary - address eigrp command generates a default route with an administrative distance of 5E.When manual summarization is configured, the summary route will use the metric of the largest specific metric of the summary routesF.The ip summary - address eigrp command generates a default route with an administrative distance of 90

4.Which of the following should an administrator do after running a command from the console onthe perimeter router?()A. Update the configuration logsB. Update the network wiring schematicsC. Update the network configuration proceduresD. Compare the configuration with the baseline

更多“The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?() ”相关问题

  • 第1题：

    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4 (Choose two.)（）。

    • A、It establishes a static route to the 172.16.3.0 network
    • B、It establishes a static route to the 192.168.2.0 network
    • C、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network
    • D、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4
    • E、It uses the default administrative distance
    • F、It is a route that would be used last if other routes to the same destination exist

    正确答案:A,E

  • 第2题：

    On router R1， which three of the following protocols will be forwarded to a host specified by the "iphelper-address" interface configuration command if the configuration has not been modified by the"ip forward-protocol udp" global configuration command？（）

    • A、BOOTP
    • B、TFTP
    • C、ARP
    • D、DNS
    • E、proxy-ARP
    • F、FTP
    • G、CDP

    正确答案:A,B,D

  • 第3题：

    Which three of the following protocols will be forwarded to a host specified by the ip helper - address interface configuration command if the configuration has not been modified by the ip forward - protocol udp global con figuration command?（）

    • A、BOOTP
    • B、TFTP
    • C、ARP
    • D、DNS
    • E、proxy - ARP
    • F、FTP

    正确答案:A,B,D

  • 第4题：

    The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）

    • A、The default administrative distance is used.
    • B、The command is used to establish a static route.
    • C、The command is used to configure the router interfaces.
    • D、The command is used to establish a stub network.
    • E、The subnet mask for the source address is 255.255.255.0

    正确答案:A,B

  • 第5题：

    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。

    • A、This command should be executed from the global configuration mode
    • B、The IP address 10.121.16.8 is the local router port used to forward data
    • C、102 is the remote DLCI that will receive the information
    • D、This command is required for all Frame Relay configurations
    • E、The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC

    正确答案:E

  • 第6题：

    单选题
    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）
    A

    This command should be executed from the global configuration mode.

    B

    The IP address 10.121.16.8 is the local router port used to forward data.

    C

    102 is the remote DLCI that will receive the information.

    D

    This command is required for all Frame Relay configurations.

    E

    The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。
    A

    This command should be executed from the global configuration mode

    B

    The IP address 10.121.16.8 is the local router port used to forward data

    C

    102 is the remote DLCI that will receive the information

    D

    This command is required for all Frame Relay configurations

    E

    The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC


    正确答案： C
    解析： 暂无解析

  • 第8题：

    多选题
    The network administrator of the Oregon router adds the following command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command (Choose two.)（）。
    A

    The command establishes a static route.

    B

    The command invokes a dynamic routing protocol for 192.168.12.0.

    C

    Traffic for network 192.168.12.0 is forwarded to 172.16.12.1.

    D

    Traffic for all networks is forwarded to 172.16.12.1.

    E

    This route is automatically propagated throughout the entire network.

    F

    Trafficfor network 172.16.12.0 is forwarded to the 192.168.12.0 network.


    正确答案： D,E
    解析： 暂无解析

  • 第9题：

    多选题
    Given the following MPLS L2 configuration command: mpls-relay 10.1.1.1 4 Which two statements true? （）(Choose two.)
    A

    This command is applied to the core router facing interface.

    B

    This command is applied to the customer facing interface.

    C

    The 4 is locally significant and identifies the layer 2 circuit.

    D

    The 4 must match exactly on the peer router configuration on the remote end.


    正确答案： B,D
    解析： 暂无解析

  • 第10题：

    多选题
    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4?（）
    A

    It establishes a static route to the 172.16.3.0 network.

    B

    It establishes a static route to the 192.168.2.0 network.

    C

    It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.

    D

    It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.

    E

    It uses the default administrative distance.

    F

    It is a route that would be used last if other routes to the same destination exist.


    正确答案： A,B
    解析： 暂无解析

  • 第11题：

    多选题
    The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）
    A

    The command is used to establish a static route.

    B

    The default administrative distance is used.

    C

    The command is used to configure the default route.

    D

    The subnet mask for the source address is 255.255.255.0

    E

    The command is used to establish a stub network


    正确答案： D,A
    解析： 暂无解析

  • 第12题：

    多选题
    Which three of the following protocols will be forwarded to a host specified by the ip helper - address interface configuration command if the configuration has not been modified by the ip forward - protocol udp global con figuration command?（）
    A

    BOOTP

    B

    TFTP

    C

    ARP

    D

    DNS

    E

    proxy - ARP

    F

    FTP


    正确答案： B,F
    解析： 暂无解析

  • 第13题：

    The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）

    • A、The command is used to establish a static route.
    • B、The default administrative distance is used.
    • C、The command is used to configure the default route.
    • D、The subnet mask for the source address is 255.255.255.0
    • E、The command is used to establish a stub network

    正确答案:A,B

  • 第14题：

    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）

    • A、This command should be executed from the global configuration mode.
    • B、The IP address 10.121.16.8 is the local router port used to forward data.
    • C、102 is the remote DLCI that will receive the information.
    • D、This command is required for all Frame Relay configurations.
    • E、The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC

    正确答案:E

  • 第15题：

    Which three statements are true about EIGRP route summarization?（）

    • A、When manual summarization is configured, the router immediately creates a route that points to null0 interface
    • B、Manual route summarization  is configured in router configuration mode when the router is configured for EIGRP routing
    • C、Manual route summarization is configured on the interface
    • D、The ip summary - address eigrp command generates a default route with an administrative distance  of 5
    • E、When manual summarization is configured, the summary route will use the metric of the largest specific metric of the summary routes
    • F、The ip summary - address eigrp command generates a default route with an administrative distance of 90

    正确答案:A,C,D

  • 第16题：

    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4?（）

    • A、It establishes a static route to the 172.16.3.0 network.
    • B、It establishes a static route to the 192.168.2.0 network.
    • C、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
    • D、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.
    • E、It uses the default administrative distance.
    • F、It is a route that would be used last if other routes to the same destination exist.

    正确答案:A,E

  • 第17题：

    Given the following MPLS L2 configuration command: mpls-relay 10.1.1.1 4 Which two statements true? （）(Choose two.)

    • A、This command is applied to the core router facing interface.
    • B、This command is applied to the customer facing interface.
    • C、The 4 is locally significant and identifies the layer 2 circuit.
    • D、The 4 must match exactly on the peer router configuration on the remote end.

    正确答案:B,D

  • 第18题：

    多选题
    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4 (Choose two.)（）。
    A

    It establishes a static route to the 172.16.3.0 network

    B

    It establishes a static route to the 192.168.2.0 network

    C

    It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network

    D

    It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4

    E

    It uses the default administrative distance

    F

    It is a route that would be used last if other routes to the same destination exist


    正确答案： D,C
    解析： 暂无解析

  • 第19题：

    多选题
    Which three statements are true regarding the candidate configuration?（）
    A

    The candidate configuration is a temporary configuration that might become the active configuration.

    B

    A candidate configuration is initially populated with the configuration currently active on the system.

    C

    Changes to the candidate configuration take effect immediately.

    D

    The candidate configuration becomes the active configuration after a system reboot.

    E

    The configure private command allows concurrent editing of a candidate configuration by multiple users.


    正确答案： C,B
    解析： 暂无解析

  • 第20题：

    多选题
    The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）
    A

    The default administrative distance is used.

    B

    The command is used to establish a static route.

    C

    The command is used to configure the router interfaces.

    D

    The command is used to establish a stub network.

    E

    The subnet mask for the source address is 255.255.255.0


    正确答案： D,C
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following should an administrator do after running a command from the console onthe perimeter router?（）
    A

    Update the configuration logs

    B

    Update the network wiring schematics

    C

    Update the network configuration procedures

    D

    Compare the configuration with the baseline


    正确答案： D
    解析： 暂无解析

  • 第22题：

    多选题
    On router R1， which three of the following protocols will be forwarded to a host specified by the "iphelper-address" interface configuration command if the configuration has not been modified by the"ip forward-protocol udp" global configuration command？（）
    A

    BOOTP

    B

    TFTP

    C

    ARP

    D

    DNS

    E

    proxy-ARP

    F

    FTP

    G

    CDP


    正确答案： B,D
    解析： 暂无解析

  • 第23题：

    多选题
    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4? (Choose two.)（）
    A

    It establishes a static route to the 172.16.3.0 network.

    B

    It establishes a static route to the 192.168.2.0 network.

    C

    It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.

    D

    It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.

    E

    It uses the default administrative distance.

    F

    It is a route that would be used last if other routes to the same destination exist.


    正确答案： E,B
    解析： 暂无解析

相关内容