A.policy list
B.RADIUS VSA
C.classifier ACL
D.LCP negotiation
第1题:
[A] which [B] what [C] that [D] it
第2题:
【问题2】(3分)
根据图4-1的配置,补充完成下面路由器的配置命令:
Router(config)# interface (3)
Router(config-if)#ip address 10.10.1.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)# interface (4)
Router(config-if)# ip address 192.168.1.1 255.255.255.0
Router(config)# interface (5)
Router(config-if)# ip address 10.10.2.1 255.255.255.0
【问题2】(3分)
(3)ethernet 0/0 (e0/0)
(4)ethernet 0/l (e0/1)
(5)serial0/0 (s0/0)
第3题:
Refer to the exhibit. During the process of configuring a virtual link to connect area 2 with the backbone area, the network administrator received this console message on R3:*Mar 1 00:2 5:01.084: %OSPF -4- ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual link but not found from 20.20.20.1, Serial 0 .How should the virtual link be configured on the OSPF routers to establish full connectivity between the areas?()
A.R1(config - router)# area 0 virtual - link 1.1.1.1R3(config - router)# area 2 virtual - link 3.3.3.3
B.R1(config - router)# area 1 virtual - link 2.2.2.2 R3(config - router)# area 1 virtual - link 2.2.2.2
C.R1(config - router)# area 1 virtual - link 20.20 .20.2 R3(config - router)# area 1 virtual - link 30.30.30.2
D.R1(config - router)# area 1 virtual - link 30.30.30.3 R3(config - router)# area 1 virtual - link 20.20.20.1
E.R1(config - router)# area 1 virtual - link 3.3.3.3 R3(config - router)# area 1 virtual - link 1.1 .1.1
第4题:
A、what, to do
B、what, to do it
C、which, 不填
D、that, 不填
第5题:
The output of the show aaa domain-map displays the following information:Domain: isp1.com; virtual-router: vr1; loopback: 1Domain: isp2.com; virtual-router: vr2; loopback: 1Domain: none; virtual-router: vr3; loopback: 1Domain: default; virtual-router: vr4; loopback: 1The end user supplies a login name of joe@isp7.com .Which virtual router is responsible for authenticating this user?()
A. vr1
B. vr2
C. vr3
D. vr4
第6题: