Which configuration command allows the ERX Edge Router to advertise customer networks into the provider’s IGP?()A.redistribute directB.redistribute staticC.redistribute connectedD.redistribute access-internal

题目
Which configuration command allows the ERX Edge Router to advertise customer networks into the provider’s IGP?()

A.redistribute direct

B.redistribute static

C.redistribute connected

D.redistribute access-internal

相似考题

1.如果路由器配置了BGP协议，要把网络地址133.1.2.0/24发布给邻居，那么发布这个公告的命令是(51)。A．R1(config-router)#network 133.1.2.0B．R1(config-router)#network 133.1.2.0 0.0.0.255C．R1(config-router)#network-advertise 133.1.2.0D．R1(config-router)#network 133.1.2.0 mask 255.255.255.0

2.You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? ()A. set protocols isis inet6B. set routing-options router-id router-idC. set protocols ospf3 area 0 interface allD. set interface fe-0/0/1 unit 0 family inet6E. set routing-options ipv6-router-id router-id

3.Which command will delete the current rescue configuration?()A. user@router# system delete configuration rescueB. user@router> request system configuration rescue deleteC. user@router# delete rescue configurationD. user@router> file delete rescue-configuration

4.软SDN的NSD参数或者参数值有哪些差异。()A.Network节点的Network_type、servic_vlan、provider_networkB.VNF关联的参数C.外部网络的provider_network参数D.Router节点增加网络侧BFD参数

更多“Which configuration command allows the ERX Edge Router to advertise customer networks into the provider’s IGP?() ”相关问题

  • 第1题：

    Which of the following commands would you use, to configure a default route to any destination NOT found in the routing table?()

    A. Router(config)# ip default-route 0.0.0.0 255.255.255.255 s0

    B. Router(config)# ip route 0.0.0.0 255.255.255.255 s0

    C. Router(config)# ip default-route 0.0.0.0 0.0.0.0 s0

    D. Router(config)# ip route 0.0.0.0 0.0.0.0 s0

    E. Router(config)# ip route any any e0


    参考答案：D

  • 第2题：

    ThefollowingcommandisissuedonaCiscoRouter:Router(configuration)loggingconsolewarningsWhichalertswillbeseenontheconsole?()

    A.Warningsonly

    B.debugging，informational，notifications，warnings

    C.warnings，errors，critical，alerts，emergencies

    D.notifications，warnings，errors

    E.warnings，errors，critical，alerts


    参考答案：C

  • 第3题：

    下列所述 的配置中，哪一个是 允许来 自网段172.16.0.0 的数据包 进入路由器 的串口0？ （）。

    A.Router(config)#access-list 10 permit 172.16.0.0 0.0.255.255 Router(config)#interface s0 Router (config-int-s0)#ip access-group 10 out#B.Router (config)#access-group 10 permit 172.16.0.0 255.255.0.0 Router(config)#interface s0 、Router (config-int-s0)#ip access-list 10 out#C.Router (config)#access-list 10 permit 172.16.0.0 0.0.255.255 Router(config)#interface s0 Router (config-int-s0)#ip access-group 10 in#D.Router (config
    route(config)#access-list 10 permit 172.16.0.0 0.0.255.255 route(config)#interface s0/0 route(config-int-s0/0)#ip access-group 10 in

  • 第4题：

    RouterR1needstobeconfiguredtoadvertiseaspecificnetwork.Whichofthefollowingcommandswouldyouuseifyouwantedtoadvertisethesubnet154.2.1.0255.255.255.0tothe EBGPneighborsonyoursubnet?()

    A.Router（config-router）#network154.2.1.0

    B.outer（config-router）#network164.2.1.0

    C.Router（config-router）#network-advertise154.2.1.0

    D.Router（config-router）#network154.2.1.0mask255.255.255.0

    E.Noneoftheotheralternativesapply


    参考答案：D

  • 第5题：

    Refertotheexhibit.S0/0onR1isconfiguredasamultipointinterfacetocommunicatewithR2andR3inthehub-and-spokeFrameRelaytopology.Whiletestingthisconfiguration，atechniciannotesthatpingsaresuccessfullyfromhostsonthe172.16.1.0/24networktohostsonboththe172.16.2.0/25and172.16.0.2.128/25networks.However，pingsbetweenhostsonthe172.16.2.0/25and172.16.2.128/25networkarenotsuccessful.Whatcouldexplainthisconnectivityproblem？（）

    A.Theipsubnet-zerocommandhasbeenissuedontheR1router.

    B.TheRIPv2dynamicroutingprotocolcannotbeusedacrossaFrameRelaynetwork.

    C.SplithorizonispreventingR2fromlearningabouttheR3networksandR3fromlearningaboutR2networks.

    D.The172.16.2.0/25and172.16.2.128/25networksareoverlappingnetworksthatcanbeseenbyR1,butnotbetweenR2andR3.

    E.The172.16.3.0/29networkusedontheFrameRelaylinksiscreatingadiscontiguousnetworkbetweentheR2andR3routersubnetworks.


    参考答案：C

  • 第6题：

    3、下列所述 的配置中，哪一个是 允许来 自网段172.16.0.0 的数据包 进入路由器 的串口0？ （）。

    A.Router(config)#access-list 10 permit 172.16.0.0 0.0.255.255 Router(config)#interface s0 Router (config-int-s0)#ip access-group 10 out#B.Router (config)#access-group 10 permit 172.16.0.0 255.255.0.0 Router(config)#interface s0 、Router (config-int-s0)#ip access-list 10 out#C.Router (config)#access-list 10 permit 172.16.0.0 0.0.255.255 Router(config)#interface s0 Router (config-int-s0)#ip access-group 10 in#D.Router (config
    route(config)#access-list 10 permit 172.16.0.0 0.0.255.255 route(config)#interface s0/0 route(config-int-s0/0)#ip access-group 10 in

相关内容