A socket is basically an end point of a communication link between two applications. Sockets that extend over a network connect two or more applications running on(61)computers attached to the network. A socket(62)two addresses:(63). Sockets provide a(64)communication channel between one or more systems.There are(65)sockets separately using TCP and UDP.
A.unique
B.separate
C.same
D.dependent
第1题:
In data communication, data link is those parts of two data terminal equipments that are controlled by a protocol along with the(71) data circuit, which together enable data(72). So-called protocol means, in short, a set of rules that determines the behavior. of functional units in achieving communication.Data circuit, however, consists of a pair of(73) transmission channels that provides a means of two-way data transmission. Between data switching exchanges, the data circuit may or may not include data circuit-terminating equipment (DCE), depending on the type of(74) used at the data switching exchange. Between a data station and a data switching exchange or data concentrator, the data circuit includes the DCE at the data station end, and may include equipment(75) to a DCE at the data switching exchange or dam concentrator location.
A.handshaking
B.interconnecting
C.linkage
D.joining
第2题:
If the OSPF protocol is used to connect customer edge (CE) routers to service provider edge(PE) routers in the VPN backbone, which two options best describe the use of SHAM links?()
第3题:
In a RSTP implementation, which of the following two link types are used? ()(Choose two.)
第4题:
Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs()。
第5题:
You are using standalone Cisco Aironet 1400 Series Wireless Bridges for a nine-mile point-to-point wireless link between two buildings. Which distance setting should you use for the bridgeconfigured as the root?()
第6题:
On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?()
第7题:
During a planning session, it is determined that a three node cluster (Node ’A’, Node ’B’, and Node ’C’) will meet the customer’s application needs. Node ’B’ will be a hot-standby fallover node for both Node ’A’ and Node ’C’ resource groups. A serial network for this cluster will require which connections?()
第8题:
a switch with a trunk link that is configured between the switches
a router with an IP address on the physical interface that is connected to the switch
a switch with an access link that is configured between the switches
a router with subinterfaces configured on the physical interface that is connected to the switch
第9题:
the communication among the two explorers had to be done through gestures
the communication between the two explorers had to be done through gestures
the two explorers had to communicate through gestures
the two explorers had to communicate between themselves from gestures
gestures were used to communicate between the two explorers
第10题:
to secure communication between two remote PCs
to secure communication between two remote offices
to secure communication betweenan remote PC and the corporate intranet
to secure communication between a corporate intranet and the public internet
第11题:
a router with subinterfaces configured on the physical interface that is connected to the switch
a router with an IP address on the physical interface connected to the switch
a switch with an access link that is configured between the switches
a switch with a trunk link that is configured between the switches
第12题:
though
tough
through
trough
第13题:
A. use a Layer 2 link between distribution switches
B. use a Layer 3 link between distribution switches
C. use a redundant link to the core
D. use a Layer 3 link between distribution switches with route summarization
第14题:
Which statement is correct about an OSPF sham-link?()
第15题:
You are using standalone cisco aironet 1400 series wireless bridges for a nine-mile point-to-point wireless link between two buildings. Which distance setting should you use for the bridge configured as the root?()
第16题:
You have a trunk link operating between two switches and you’re experiencing problems withframes leaking between the two VLANs. Each switch has identical modules, software revisionsand VLAN configuration information. Spanning tree protocol is disabled on all VLANs. What isprobably causing this problem?()
第17题:
What is the primary use of a remote access VPN?()
第18题:
A company has installed a new 802.11g point-to-point connection between two buildings and isexperiencing low throughput across the link. The current setup involves a wireless bridge on the roof with an omni-directional antenna. Which of the following would BEST improve the link performance?()
第19题:
Routers A and B have an OC12c and a GE link between them and are running OSPF over both of these links.Which item is correct, assuming the default JUNOS software OSPF metric calculation?()
第20题:
Utilize the integrated 10/100/1000 network interface
Implement Virtual Ethernet to enable inter-partition communication
Implement shared Ethernet with the Ethernet adapters utilized in the other LPARs
Implement a Point to Point protocol serial communication between the p5 595 serial ports
第21题:
bridge
access point
wireless adaptor
Layer 3 switch
antenna
第22题:
A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
A sham-link is a logical link between PE routers that carries OSPF LSAs and forwards customer traffic across it.
A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
第23题:
The link is using IEEE 802.1Q protocol
The link is using IEEE 802.1E protocol
Spanning tree is disabled
Not enough information to determine
The native VLAN information is identical at each end of the link
The native VLAN information is different at each end of the link