You are installing Windows 2000 server on Windows NT using an unattended installation. You find out the SCSI adapter is not supported by Microsoft HCL. You find out from the manufacturer that a new driver is available for installing on Windows 2000. How s

第1题：

第2题：

第3题：

第4题：

You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）

• A、On your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to  install the correct multiprocessor HAL. 
• B、On the original computer, through the Add New Hardware, select the processor from the  device list and install the required processor. 
• C、Download the patch from the motherboard manufacturer to allow the configuration of dual  processors. 
• D、Reinstall Windows 2000 Professional on both the test computers.

第5题：

You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）

• A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 
• B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 
• C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 
• D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

第6题：

You install a Zip device on your Windows 2000 Professional computer. You reboot your computer only to find out that the computer does not respond at all. You reboot into Safe Mode， and again， the computer does not respond. How do you recover from this problem？（）

• A、Use the listsvc command to disable the Zip device driver
• B、Select Recovery Console from the Recovery Menu.
• C、Use the disable command to disable the Zip device driver
• D、Select the Debug mode from the Windows 2000 Advanced Options menu
• E、Insert the Emergency Repair Disk and specify the path of the recovery file on the hard disk
• F、Start the computer using the Windows 2000 Professional CD-ROM.

第7题：

You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）

• A、When away from the office use Device Manager to remove the adapter. 
• B、When away from the office configure the startup properties for the adapter to be automatic. 
• C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.
• D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.

第8题：

You are the administrator of your company’s network. You attempt to install a printer driver on a Windows 2000 computer for a user named Linda.  You receive the following error message： "Error 11-Cannot install printer driver."  The driver was originally downloaded from the printer manufacturer’s Web site. You have successfully used the driver in the past on their Windows 2000 Professional computers.  You want to configure Linda’s computer to check for driver integrity and to allow you to install this printer driver.  What should you do？ （）

• A、Configure driver signing to display a message before installing an unsigned driver.
• B、Configure driver signing to ignore File Signature Verification.
• C、Create a Local Computer Policy to enable Windows File Protection.
• D、Use the Add Printer Driver wizard to install the driver.Create a Local Computer Policy to enable Windows File Protection.
• E、Use the Print Troubleshooter.
• F、Configure the computer to prevent the installation of unsigned drivers.

第9题：

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 installed. You are in the process of installing a Server Core installation of Windows Server 2012 on a new ENSUREPASS.com server， named ENSUREPASS-SR13.  Which of the following is TRUE with regards to a installing a Server Core installation of Windows Server 2012？（）

• A、The Server Graphical Shell is installed， but not enabled
• B、Server roles can be configured locally via the command prompt using Windows PowerShell.
• C、Server roles can be configured locally via Server Manager
• D、You are able to access the Microsoft Management Console locally
• E、The Desktop Experience is not available

第10题：

You have a Windows Server 2008 R2 Hyper-V failover cluster.  You manage the virtual environment by using Microsoft System Center Virtual Machine Manager （VMM） 2008 R2. You need to find out whether the failover cluster is properly configured to support highly available virtual machines （VMs）.  Which PowerShell cmdlet should you run？（）

• A、Test-Cluster
• B、Enable-VMHost
• C、Get-VMHostRating
• D、Test-ClusterResourceFailure

第11题：

You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer.  You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices.   Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again.   You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）

• A、Start the computer in safe mode.  Enable driver signing.
• B、Start the computer in safe mode.  Use Device Manager to remove the SCSI tape device.
• C、Start the computer by using the Recovery Console.  Repair the Master Boot Record by using the fixmbr command.
• D、Start the computer by using the Recovery Console.  Disable the SCSI adapter device driver by using the disable command.

第12题：

第13题：

第14题：

第15题：

You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）

• A、Configure Windows 2000 Professional to enable driver signing.
• B、Configure Windows 2000 Professional to disable driver signing.
• C、Start the computer by using the recovery console， restore the system state data.
• D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
• E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

第16题：

You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）

• A、Start the computer in Safe Mode. Enable driver signing.
• B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.
• C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.
• D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

第17题：

You install Windows 2000 Professional on an existing department’s computer setup, which was using Windows NT 4.0 Workstation. Later you are told that a dial-up connection will be needed to access a local Internet Service Provider. When you open the computer that connects to the ISP, you find that a 33.6k modem has already been installed. But the users insist, that you also install a faster 56k modem. After installing the new modem and rebooting the computer, you notice that there is a conflict between the two modems. How do you resolve this situation?（）

• A、Disable the 33.6 K modem.
• B、Disable the 56 K modem
• C、Disable the Com port 2
• D、Disable Com port 4
• E、Run Windows update， this will update this 33.6 K modem drivers.

第18题：

You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.You are in the process of installing a Server Core installation of Windows Server 2012 R2 on a new ABC.com server， named ABC-SR13.Which of the following is TRUE with regards to a installing a Server Core installation of Windows Server 2012 R2？（）

• A、The Server Graphical Shell is installed， but not enabled.
• B、Server roles can be configured locally via the command prompt using Windows PowerShell.
• C、Server roles can be configured locally via Server Manager.
• D、You are able to access the Microsoft Management Console locally.
• E、The Desktop Experience is not available.

第19题：

You are designing a strategy for installing Windows server 2003 on the new domain controllers. Which method should you use?（）

• A、Unattended installation
• B、Remote Installation Services （RIS）
• C、Automated Deployment Services （ADS）
• D、Microsoft Systems Management Server （SMS）

第20题：

You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server.  You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）

• A、 Add an answer file to the root directory of the RIS bootable floppy disk.      Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
• B、 Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk.     Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
• C、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide an answer file on a floppy disk. 
• D、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide a SCSI-controller driver on a floppy disk. 
• E、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide the appropriate HAL on a floppy disk. 

第21题：

You are the network administrator for ExamSheet.net.  You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）

• A、Restart the computer in the docking station.
• B、Run the Add/Remove Hardware wizard.
• C、Use Device Manager to scan for hardware changes.
• D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.
• E、Install the new network adapter driver.

第22题：

You install a new CD-ROM on your computer. After installing the appropriate drivers and restarting the computer you notice that it is not working correctly. You check resources and find out that it is not using “Automatic resource settings”. How do you get your CDROM to work? （）

• A、Check ‘Use Automatic Settings’
• B、Update the drives
• C、Use the windows troubleshooter
• D、Manually set the interrupt，I/O port， and memory address to that of the hardware manufacturers specifications.

第23题：

You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully.  Which two methods can you use to resolve the problem?（）

• A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by     using the Emergency Repair Disk for the computer.
• B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback     driver from the Windows 2000 Professional CD-ROM.
• C、Restart the computer by using the last know good configuration.
• D、Restart the computer in safe mode and reinstall the original network adapter driver. 
• E、Restart the computer and disable Plug and Play in the computer BIOS.