You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Work

题目

You are the administrator of Ezonexam.com's Windows 2000 network.

Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.

You want to be able to access your project files when using either of the operating systems.

What should you do?

A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.

C．Configure Disk 2 to use Encrypting File System (EFS).

D．Configure Disk 2 as a basic volume and format the volume as FAT32.

相似考题

1.You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B．Disable the disk compression in Windows NT Workstation.C．Install service pack four or later in Windows NT Workstation.D．Install the distributed file system client on the Windows NT Workstation.

2.You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.Ezonexam1 is a backup domain controller in Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezonexam1 runs an application that is used by all of Ezonexam.com's employees.A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.You need to install the new application on Ezonexam1 as quickly as possible.What should you do first?A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.B．On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrade Ezonexam1.C．Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.

3.You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.

4.The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.You want to prevent all users from browsing the network.What should you do? (Each correct answer presents a complete solution. Choose two.)A．Create a Windows Group Policy that denies user access to My Network Places.B．Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.C．Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.D．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.E．Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.

更多“You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Work”相关问题

  • 第1题：

    You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.

    You notice that users can still save files to drive D.

    You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?

    A．Use Windows 2000 Professional to configure drive D as a dynamic volume.

    B．Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.

    C．Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.

    D．Reinstall Windows NT workstation after configuring the disk code task.


    正确答案：C
    解析：Explanation: To prevent both Windows NT 4.0 Workstation and Windows 2000 Professional users from writing to the D drive, NTFS permissions must be used. For example, it could be used to deny users write permission.

    Incorrect answers:
    A: Configuring drive D as a dynamic volume would prevent Windows NT 4.0 Workstation users accessing drive D; however, Windows 2000 Professional users would still be able to access the drive.

    B: Enabling EFS on drive D would prevent access to drive D from within Windows NT.

    D: Neither Windows NT 4.0 Workstation nor Windows 2000 Professional supports a disk code task.

  • 第2题：

    You are the administrator for Ezonexam's network.

    Your network includes Windows 2000 Professional client computers, Windows 2000 Server computers, Windows XP Professional computers, and UNIX client computers. Users of the UNIX operating system send print jobs to shared printers on a UNIX computer named PrintServ.

    You want to make the shared printers on PrintServ available to the Windows 2000 Professional computers, the Windows 2000 Server computers and the Windows XP Professional computers.

    What should you do?

    A．Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.

    B．Configure each of the printers to support TCP/IP printing.

    C．Create an LPR port on each client that is configured to use PrintServ.

    D．Configure each of the printers to use LPR port


    正确答案：C
    解析：Explanation: When the Print Services have been installed, UNIX clients will be able to connect to any of your printers. In addition, you will be able to add an LPR port on your server to redirect print jobs to an LPD service hosted on a UNIX computer. When installed on this port, a printer will be able to be shared on your server and will appear as any other printer to your Windows clients. All jobs submitted to it will be forwarded to a spooler on the UNIX server. In addition, UNIX clients will be able to connect to the IP address of the Windows 2000 UNIX Print server and then to the specific queue.

    Incorrect answers:
    A: This will not allow the UNIX clients to make use of the printer.

    B: This option presupposes that the printers are TCP/IP capable printers. The disadvantage of this is that you do not get the benefits of Windows 2000 printer security, scheduling, or administration. In order to support the UNIX clients you need to create an LPR port on each client.

    D: This is impractical. All that is necessary is to create an LPR port on each client that is configured to use PrintServ.

  • 第3题：

    You are the administrator for Ezonexam.com's network.

    Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Users of the Windows operating systems store files on shared folders on a Windows 2000 Server computer named FileServ.

    You want to make the shared folders on FileServ available to the UNIX computers.

    What should you do?

    A．Install and configure Network File System (NFS) on FileServ.

    B．Configure data volumes on FileServ to be FAT volumes.

    C．Disable Server Message Block (SMB) signing on FileServ.

    D．Install Simple TCP/IP Services on FileServ.


    正确答案：A
    解析：Explanation:ClickingMicrosoftWindowsNetworktellsyoursoftwarethatyouwanttousetheClientforMicrosoftNetworks,insteadofsomeotherinstalledclient,tofindservers.Forinstance,iftheNetwareclientwereinstalled,youwouldselectNetwareNetworkfromthebrowselisttosearchforNetwareservers.IfaUnixclientwerepresent(thereareanumberoftheseonthemarket),anoptionthatprobablyincludesthetermNFSwouldshowuponthelist.YouwouldselectittolookforserversrunningtheNFSfileserversoftware.IfyouinstallandconfigureNFSonFileServ,thenyouwillsupportUNIXcomputersaswell.Incorrectanswers:B:ConfiguringFATvolumeswillnotallowUNIXcomputerstoaccessthesharedfolders.C:ThisisnotaServerMessageBlocksigningissue.D:InstallingSimpleTCP/IPServicesonFileServisnotgoingtoavailthesharedfoldertoUNIXcomputers.

  • 第4题：

    You configure the hard disk on each computer to have two 4-GB partitions. Windows NT  Workstation is installed on driver C.  Windows 2000 Professional is installed on drive D.   In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D.   You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.   What should you do on each computer?（）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic partition
    • B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
    • C、Use Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permission
    • D、Reinstall Windows NT Workstation after configuring the disk quotas

    正确答案:C

  • 第5题：

    You are the desktop administrator for your company's sales department. Susan is a user in the sales department. Susan's computer currently runs Microsoft Windows NT Workstation 4. 0.  Susan uses a legacy application that is compatible with only Windows NT Workstation. You want to install Windows XP Professional on Susan's computer. You plan to set up a dual-boot configuration so that Susan can run either Windows XP Professional or Windows NT Workstation. Susan's computer has two hard disks, named drive C and drive G. You install Windows XP Professional on drive G. After Windows XP Professional is installed, Susan reports that Windows NT Workstation is no longer available. You need to ensure that both operating systems are available on Susan's computer. What should you do?（） 

    • A、Insert the Windows XP Professional CD-ROM into the computer. Run the Sfc.exe /scannow command.
    • B、Insert the Windows XP Professional CD-ROM into the computer. Run the Winnt32. exe /cmdcons command.
    • C、Start the computer by using an MS-DOS bootable floppy disk. Run the Attrib.exe -r -h -s c：/bootsect.dos command.
    • D、Start the computer by using the Windows XP Professional CD-ROM. From the Recovery console， run the Bootcfg /rebuild command.

    正确答案:D

  • 第6题：

    You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? （）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic volume
    • B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
    • C、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission
    • D、Reinstall Windows NT workstation after configuring the disk code task

    正确答案:C

  • 第7题：

    Sandy works in Tron Electronics and uses a Windows 2000 Professional system to work on. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from any computer she logs in at. What can you do to insure that she has this ability?（）

    • A、 Configure the server properties of printer system folder to connect to the shared printer. 
    • B、Install a print driver for the print device on the Windows NT workstation computer. 
    • C、Create a roaming user profile for Sandy 
    • D、Upgrade the Windows NT 4 computer to a Windows 2000 Professional computer and then  import the file settings for Sandy's user account.

    正确答案:C

  • 第8题：

    Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system？（）

    • A、The required result cannot be obtained with the above given solutions
    • B、Enable EFS on D
    • C、Format the NT 4 partition and reload NT 4
    • D、Use NT 4.0 NTFS permissions to deny users write access to D

    正确答案:D

  • 第9题：

    You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? （）

    • A、 Run Check Disk in Windows NT Workstation 4.0.
    • B、 Disable disk compression in Windows NT Workstation 4.0.
    • C、 Install Service Pack 4 or later for Windows NT Workstation 4.0.
    • D、 Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.

    正确答案:C

  • 第10题：

    单选题
    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）
    A

    Use Windows 2000 Professional to configure drive D as a dynamic partition

    B

    Use Windows 2000 Professional to enable encrypting file system on drive D

    C

    Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission

    D

    Reinstall Windows NT Workstation after configuring disk quotas


    正确答案： C
    解析： ou can use NTFS permissions to prevent users from saving files to a specific drive， partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

  • 第11题：

    单选题
    You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）
    A

    Reinstall Windows NT Workstation 4.0 after configuring the disk quotas

    B

    Use Windows 2000 Professional to configure drive C as a dynamic partition

    C

    Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C

    D

    Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system？（）
    A

    The required result cannot be obtained with the above given solutions

    B

    Enable EFS on D

    C

    Format the NT 4 partition and reload NT 4

    D

    Use NT 4.0 NTFS permissions to deny users write access to D


    正确答案： D
    解析： You should use NT 4.0 NTFS permissions to deny users write access to D.This can prevent users from saving files from windows NT 4.0.             
    Choice “Enable EFS on D is incorrect” because NT 4.0 does not support EFS.  
    Choice “Format the NT 4 partition and reload NT 4.0” will remove MBR and system partition （booting files） of windows 2000 professional.

  • 第13题：

    You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.

    You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.

    What should you do?

    A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.

    B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.

    C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.

    D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.


    正确答案：A
    解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.

  • 第14题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.

    Each computer has an 8 GB hard disk.

    You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.

    In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.

    You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.

    What should you do?

    A．Use Windows 2000 Professional to configure drive D as a dynamic partition.

    B．Use Windows 2000 Professional to enable encrypting file system on drive D.

    C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.

    D．Reinstall Windows NT Workstation after configuring disk quotas.


    正确答案：C
    解析：Explanation: You can use NTFS permissions to prevent users from saving files to a specific drive, partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

    Incorrect answers:
    A: Windows NT users cannot use dynamic partitions, as dynamic partitions are a storage feature that has been introduced with Window 2000. Thus, configuring drive D as a dynamic partition will prevent the Windows NT Workstation users from using the disk. However, the Windows 2000 Professional users will still be able to make use of the drive and to store files on the drive.

    B: The Encrypting File System (EFS) is a file and folder security mechanism used to prevent unauthorized users from accessing encrypted files. This does not prevent users from saving files on the disk. It only prevents them from opening and reading encrypted files.

    D: Reinstalling Windows NT will not prevent users in Windows 2000 to save files on disk D. As the installation process does not have an option to prevent users from saving files to specified locations.

  • 第15题：

    You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do？（）

    • A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
    • B、 Disable the disk compression in Windows NT Workstation.
    • C、 Install service pack four or later in Windows NT Workstation.
    • D、 Install the distributed file system client on the Windows NT Workstation.

    正确答案:C

  • 第16题：

    You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）

    • A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 
    • B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 
    • C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 
    • D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

    正确答案:A

  • 第17题：

    You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?（）

    • A、Format the dynamic volume as a FAT32 partition.
    • B、Format the dynamic volume as a FAT16 partition.
    • C、Configure Disk 2 to use Encrypting File System （EFS）.
    • D、Configure Disk 2 as a basic volume and format the volume as NTFS.
    • E、Configure Disk 2 as a basic volume and format the volume as FAT32.

    正确答案:D

  • 第18题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic partition
    • B、Use Windows 2000 Professional to enable encrypting file system on drive D
    • C、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission
    • D、Reinstall Windows NT Workstation after configuring disk quotas

    正确答案:C

  • 第19题：

    You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）

    • A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
    • B、Use Windows 2000 Professional to configure drive C as a dynamic partition
    • C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
    • D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

    正确答案:D

  • 第20题：

    You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）

    • A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.
    • B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.
    • C、Configure Disk 2 to use Encrypting File System （EFS）.
    • D、Configure Disk 2 as a basic volume and forma the volume as FAT32.

    正确答案:A

  • 第21题：

    单选题
    You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? （）
    A

    Use Windows 2000 Professional to configure drive D as a dynamic volume

    B

    Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D

    C

    Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission

    D

    Reinstall Windows NT workstation after configuring the disk code task


    正确答案： B
    解析： To prevent both Windows NT 4.0 Workstation and Windows 2000 Professional users from writing to the D drive， NTFS permissions must be used. For example， it could be used to deny users write permission.

  • 第22题：

    单选题
    You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? （）
    A

     Run Check Disk in Windows NT Workstation 4.0.

    B

     Disable disk compression in Windows NT Workstation 4.0.

    C

     Install Service Pack 4 or later for Windows NT Workstation 4.0.

    D

     Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You configure the hard disk on each computer to have two 4-GB partitions. Windows NT  Workstation is installed on driver C.  Windows 2000 Professional is installed on drive D.   In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D.   You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.   What should you do on each computer?（）
    A

    Use Windows 2000 Professional to configure drive D as a dynamic partition

    B

    Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D

    C

    Use Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permission

    D

    Reinstall Windows NT Workstation after configuring the disk quotas


    正确答案： D
    解析： 暂无解析

相关内容