Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Ser

题目

Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.

When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".

What should you do?

A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.

B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.

C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.

D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

相似考题

1.You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.You notice that users can still save files to drive D.You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?A．Use Windows 2000 Professional to configure drive D as a dynamic volume.B．Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.C．Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.D．Reinstall Windows NT workstation after configuring the disk code task.

2.Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:"Boot disk or operating system not found".You use Recovery Console to discover that the files on partition C are corrupted.You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.What should you do?A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.

3.A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager

4.You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.

更多“Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Ser”相关问题

  • 第1题：

    You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.

    You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.

    What should you do? (Choose all that apply)

    A．Convert the system partition to NTFS.

    B．Install service pack4 or later on the server.

    C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.

    D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.


    正确答案：B
    解析：Explanation: To ensure that no application data or user data is lost during the upgrade the following two steps will be taken:
    1. Install service pack4 (B).
    2. Start the installation process from within the Windows environment and select the option to upgrade (almost C, but not quite).

    Incorrect answers:
    A: NTFS is not required

    C: You can't upgrade to Windows 2000 by booting from the CD. The CD must be run from within the NT environment.

    D: It is not necessary to install a standard NT Server 4.0 server.

  • 第2题：

    You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.

    When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."

    Which two actions should you take to eliminate the STOP error? (Choose Two)

    A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.

    B．Select Safe Mode from the Windows 2000 boot menu.

    C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.

    D．Install a driver for the SCSI controller from a floppy disk.

    E．Use Device Manager to update the driver for the SCSI controller.


    正确答案：AD
    解析：Explanation: To solve the problem posed in this scenario we must restart the Windows 2000 installation process and supply the correct SCSI driver. We cannot use Device Manager or Safe Mode at this stage since Windows 2000 is not installed yet. We must press F6 when Setup prompts us to do so. We must then press F6 again to supply the driver for a mass storage controller to the Windows 2000 Setup program.

    Incorrect answers:
    B: We cannot use Safe Mode at this stage, as Windows 2000 is not installed yet.

    C: We need to Windows 2000 Server CD-ROM to be able to perform. the install process.

    E: The Device Manager cannot be used at this stage since Windows 2000 is not installed yet.

  • 第3题：

    You are the network administrator for Ezonexam.

    The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.

    Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.

    One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.

    You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.

    What should you do?

    A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.

    B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.

    C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.

    D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.


    正确答案：A
    解析：Explanation:Therearefourwaystoperform.anattendedinstallation:1.BoottoaCD-ROM,therebyinvokingthesetuproutine.2.BoottoacurrentoperatingsystemwithCD-ROMsupportandmanuallyinvokethesetuproutine.3.BoottoasetoffoursetupdisksandthenprovidetheCD-ROMwhenprompted.4.Boottoanetwork-awareoperatingsystemandinvokesetupoverthenetwork.IfyouhaveacomputerwhoseBIOSsupportsbootingfromaCD-ROM,youcansetupWindows2000Serverwithoutinstallinganoperatingsystemonyourharddriveandwithoutrequiringnetworksupport.Todoso,configureyourcomputertoboottotheCD-ROMintheBIOS.IntheabovescenariotheserverfailedandforyoutorecovertheserverasquicklyaspossibleandrecoveringasmuchdataaspossibleyouneedtousetheWindows2000ServerCDandselecttheRepairoptioninSetup.Incorrectanswers:B:Thisoptionwillnotbethebesttofollowiftheserveristoberecoveredwithintheshortestpossibletime.Youwillalsolosesomedatasincere-creatingthesharedfoldersonthefirstharddiskwouldalreadyhavedatamissingsincePartitionCiscorrupted.C:EmergencyRepairDiskenablesyoutorecoverfromRegistrysettingsthatrenderyoursysteminoperable.ThismightbemisconfigurationthatcouldnotbecaughtwiththeLastKnownGoodConfiguration,oritmightbedeleteduseraccountsorotherRegistrychanges.Thisisnotaregistryproblem.TheEmergencyRepairDiskcanbeusedtofacilitatesomesystemrepairsonyourWindows2000server.Essentially,thediskcanbeusedtorepairstartupproblems,likewhenessentialstartupfilesarenotpresentandyourServerrefusestoboot.However,thisproblemneedstobeaddressesasquicklyaspossibleandmakinguseoftheRepairoptioninSetupfromtheWindows2000ServerCDwouldbethequickermethod.D:TheRecoveryconsoleisapowerfultext-basedbootalternativeforWindows2000Server.Ifyoursystembecomessocorruptthatitwillnotbootandnootherrepairprocesswillhelp,youcanboottotheRecoveryconsoleandcopyfilestoorfromyourserver.Inaddition,youcanstopandstartservices,ifaservicethatyouhaveinstalledcausesproblemswithbooting.Thisoptiondoesnotrepresentthequickestwaytoaddresstheproblemathand.

  • 第4题：

    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）

    • A、 Reformat the NTFS partition.
    • B、 Recreate the partition that was deleted.
    • C、 Rewrite the MBR.
    • D、 Run a check disk on the drive.

    正确答案:D

  • 第5题：

    You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）

    • A、Reinstall the operating system
    • B、Start the computer by using the Windows 2000 Professional CD-ROM.
    • C、Use the Recovery Console to repair the Master Boot Record.
    • D、Use the Emergency Repair Disk to repair the Master Boot Record.

    正确答案:B,C

  • 第6题：

    You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? （）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic volume
    • B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
    • C、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission
    • D、Reinstall Windows NT workstation after configuring the disk code task

    正确答案:C

  • 第7题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic partition
    • B、Use Windows 2000 Professional to enable encrypting file system on drive D
    • C、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission
    • D、Reinstall Windows NT Workstation after configuring disk quotas

    正确答案:C

  • 第8题：

    You are a network administrator for ExamSheet.net.  You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows  NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit.  What should do? （）

    • A、Create the boot drive on drive C and format as a FAT16 partition. 
    • B、Create the boot drive on drive C and format as a NTFS partition.
    • C、Configure the boot drive as a basic volume and format the volume as FAT32.
    • D、Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition. 
    • E、Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.

    正确答案:A

  • 第9题：

    Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system？（）

    • A、The required result cannot be obtained with the above given solutions
    • B、Enable EFS on D
    • C、Format the NT 4 partition and reload NT 4
    • D、Use NT 4.0 NTFS permissions to deny users write access to D

    正确答案:D

  • 第10题：

    单选题
    Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）
    A

    Start the computer in safe mode and reformat the hard disk.

    B

    Start the computer in the debug mode and reformat the hard disk.

    C

    Start the computer using the ERD and repair the Master Boot Record.

    D

    Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    You are the network administrator for Company.com.  Your Windows 2000 Professional computer has 128 MB of RAM and two physical hard disks. Each hard disk has a single partition configured as drive C and D. Each partition has more than 500 MB of free disk space. Windows 2000 Professional and all applications are installed on drive C. You frequently run two or more memory-intensive graphics applications simultaneously. You notice that access to drive C is much slower when you are using the graphics applications. You want to maximize overall disk performance for your computer.   What should you do?（）
    A

    Configure the paging file to reside on drive C only

    B

    Configure the paging file to reside on drive D only

    C

    Configure the initial size of the paging file and the maximum size of paging file to 64 MB

    D

    Configure the initial size of the paging file and the maximum size of the paging file to 128 MB

    E

    Configure the initial size of the paging file and the maximum size of the paging file to 256 MB


    正确答案： C,B
    解析： 暂无解析

  • 第12题：

    单选题
    Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system？（）
    A

    The required result cannot be obtained with the above given solutions

    B

    Enable EFS on D

    C

    Format the NT 4 partition and reload NT 4

    D

    Use NT 4.0 NTFS permissions to deny users write access to D


    正确答案： D
    解析： You should use NT 4.0 NTFS permissions to deny users write access to D.This can prevent users from saving files from windows NT 4.0.             
    Choice “Enable EFS on D is incorrect” because NT 4.0 does not support EFS.  
    Choice “Format the NT 4 partition and reload NT 4.0” will remove MBR and system partition （booting files） of windows 2000 professional.

  • 第13题：

    Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.

    The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.

    What should you do?

    A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.

    B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.

    C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.

    D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.

    E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.


    正确答案：D
    解析：Explanation: To install Windows 2000 Server on computers from source files that are located on a centralized network share we would have to connect to the network share from the the computers. If the computers do not have PXE-compliant network cards we would have to make a network boot disk that the computers can use connect to the network share. We would start the installation process by using winnt with /s /u /udf switches. We must use winnt and not winnt32 as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.

    Incorrect answers:
    A: Makebt32 is used to create a set of four setup floppy disks.

    B: The boot diskette must include network drivers.

    C: Dsclient.exe is a directory service client for Windows 9x. It cannot be used to start an installation of Windows 2000.

    E: The installation process cannot be started by using a Windows 2000 emergency repair disk.

  • 第14题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.

    Each computer has an 8 GB hard disk.

    You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.

    In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.

    You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.

    What should you do?

    A．Use Windows 2000 Professional to configure drive D as a dynamic partition.

    B．Use Windows 2000 Professional to enable encrypting file system on drive D.

    C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.

    D．Reinstall Windows NT Workstation after configuring disk quotas.


    正确答案：C
    解析：Explanation: You can use NTFS permissions to prevent users from saving files to a specific drive, partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

    Incorrect answers:
    A: Windows NT users cannot use dynamic partitions, as dynamic partitions are a storage feature that has been introduced with Window 2000. Thus, configuring drive D as a dynamic partition will prevent the Windows NT Workstation users from using the disk. However, the Windows 2000 Professional users will still be able to make use of the drive and to store files on the drive.

    B: The Encrypting File System (EFS) is a file and folder security mechanism used to prevent unauthorized users from accessing encrypted files. This does not prevent users from saving files on the disk. It only prevents them from opening and reading encrypted files.

    D: Reinstalling Windows NT will not prevent users in Windows 2000 to save files on disk D. As the installation process does not have an option to prevent users from saving files to specified locations.

  • 第15题：

    You configure the hard disk on each computer to have two 4-GB partitions. Windows NT  Workstation is installed on driver C.  Windows 2000 Professional is installed on drive D.   In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D.   You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.   What should you do on each computer?（）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic partition
    • B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
    • C、Use Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permission
    • D、Reinstall Windows NT Workstation after configuring the disk quotas

    正确答案:C

  • 第16题：

    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

    • A、Disk Management
    • B、Services and Applications
    • C、Removable Storage
    • D、Device Manager

    正确答案:A

  • 第17题：

    Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）

    • A、Start the computer in safe mode and reformat the hard disk.
    • B、Start the computer in the debug mode and reformat the hard disk.
    • C、Start the computer using the ERD and repair the Master Boot Record.
    • D、Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.

    正确答案:D

  • 第18题：

    You are the network administrator for Company.com.  Your Windows 2000 Professional computer has 128 MB of RAM and two physical hard disks. Each hard disk has a single partition configured as drive C and D. Each partition has more than 500 MB of free disk space. Windows 2000 Professional and all applications are installed on drive C. You frequently run two or more memory-intensive graphics applications simultaneously. You notice that access to drive C is much slower when you are using the graphics applications. You want to maximize overall disk performance for your computer.   What should you do?（）

    • A、Configure the paging file to reside on drive C only
    • B、Configure the paging file to reside on drive D only
    • C、Configure the initial size of the paging file and the maximum size of paging file to 64 MB
    • D、Configure the initial size of the paging file and the maximum size of the paging file to 128 MB
    • E、Configure the initial size of the paging file and the maximum size of the paging file to 256 MB

    正确答案:B,E

  • 第19题：

    You are a network administrator for ExamSheet.net's Windows 2000 network.  A user named Sandra has a Windows 2000 Professional computer with a single hard disk with two partitions configured as drive C and D. A pagefile has been configured on Drive C:. Sandra reports that applications on her Windows 2000 Professional computer are running slowly. You notice that Sandra's computer has 64 MB of RAM. Her hard drive contains 70 MB of free disk space on drive C and 160 MB of free disk space on drive D.You want to improve the performance of Sandra's computer.  What should you do?（）

    • A、Move the paging file to drive D
    • B、Use Disk Cleanup to delete temporary files and unnecessary program files
    • C、Perform a disk analysis， and use the disk defragmenter if recommended
    • D、Ensure that the Performance Options window is optimized for applications
    • E、Ensure that the Performance Options services.

    正确答案:B,C,D

  • 第20题：

    You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）

    • A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
    • B、Use Windows 2000 Professional to configure drive C as a dynamic partition
    • C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
    • D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

    正确答案:D

  • 第21题：

    单选题
    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）
    A

    Disk Management

    B

    Services and Applications

    C

    Removable Storage

    D

    Device Manager


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    You are a network administrator for ExamSheet.net.  You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows  NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit.  What should do? （）
    A

    Create the boot drive on drive C and format as a FAT16 partition. 

    B

    Create the boot drive on drive C and format as a NTFS partition.

    C

    Configure the boot drive as a basic volume and format the volume as FAT32.

    D

    Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition. 

    E

    Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    多选题
    You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）
    A

    Reinstall the operating system

    B

    Start the computer by using the Windows 2000 Professional CD-ROM.

    C

    Use the Recovery Console to repair the Master Boot Record.

    D

    Use the Emergency Repair Disk to repair the Master Boot Record.


    正确答案： C,D
    解析： 暂无解析

相关内容