While working in setup mode, a configuration line is typed incorrectly. What should you do to exit setup mode, without executing or saving any of the mistakes you made?()
第1题:
You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized Hardware abstraction layer (HAL) to use with the computer. The customized HAL is on a floppy disk.
You want to install the customized HAL designed for the computer. What should you do?
A.During the text mode portion of the Windows 2000 setup, install the customized HAL.
B.After the text mode portion of Windows 2000 Setup is complete, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 Setup
C.After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then continue the windows 2000 Setup.
D.After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.
第2题:
VoLTE终端的语音能力在哪条消息上报给MME()。
A.Attach Request
B.Security mode command
C.initial Context Setup Response
D.Attach Complete
第3题:
A. To restart the router.
B. To bypass the configuration in Flash.
C. To view the password before changes are made.
D. To bypass setup configuration mode.
E. To access ROM Monitor mode.
第4题:
Which statement is TRUE concerning buoyant work vests aboard tankers ________.
A.They may be worn while working on deck but not while working over the side
B.They must be used only under supervision of a designated ship's officer
C.They will be accepted for up to 10% of the required life preservers
D.They may be worn during drills
第5题:
What are two uRPF working modes?()
第6题:
How can an administrator determine if a router has been configured when it is first powered up?()
第7题:
In which two cases would you perform only consistent backup?()
第8题:
express mode
safe mode
loose mode
strict mode
tight mode
第9题:
XCOPY
the Copy Web tool
the Publish Web tool
a Web Setup project
第10题:
user EXEC mode
global configuration mode
privileged EXEC mode
auxiliary setup mode
第11题:
1+1 is based on APS, while 1:1 is based on IPS.
1:1 is used in SNCP switching, while 1+1 is used in MS-SPRing switching.
1+1 sends signals on Working and Protect paths, while 1:1 sends signals only on Working path.
1+1 sends signals on Working path ONLY, while 1:1 sends signals on both Working and Protect paths.
第12题:
Type exit at the setup dialog.
Type close at the setup dialog.
Press the Ctrl-C key combination.
Press the Ctrl-X key combination.
Issue the copy startup-config command.
Issue the 'write e command.
Issue the write mem command
第13题:
How can a Ezonexam administrator determine if a router has been configured when it is first powered up?
A.A configured router prompts for a password
B.A configured router goes to the privileged mode prompt
C.An un configured router goes into the setup dialog
D.An un configured router goes to the enable mode prompt
第14题:
以下消息可以在安全激活前使用的有?()
A.Handover From EUTRA Preparation Request
B.Security Mode Command
C.Security Mode Complete
D.RRC Connection Setup
第15题:
A.user EXEC mode
B.global configuration mode
C.privileged EXEC mode
D.auxiliary setup mode
第16题:
第17题:
What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?()
第18题:
What is the difference between 1+1 and 1:1 protection switching?()
第19题:
You are working with a team of developers on a Web site. You copy the Web site from the staging server to work on it locally. While making changes, you create new C# source code files and delete old ones. You need to ensure that your changes propagate to the staging server without affecting any files that you have not modified. Which tool should you use? ()
第20题:
start the system in DOS Mode and run the WIN /S command
press the
start the system in DOS Mode and run the safe.EXE file
hold
第21题:
To restart the router.
To bypass the configuration in Flash.
To view the password before changes are made.
To bypass setup configuration mode.
To access ROM Monitor mode.
第22题:
A configured router prompts for a password
A configured router goes to the privileged mode prompt
An un configured router goes into the setup dialog
An un configured router goes to the enable mode prompt
第23题:
You are working on a database where downtime is not tolerated.
You are working on a database where downtime can be tolerated.
You are working on a database that operates in ARCHIVELOG mode.
You are working on a database that operates in NOARCHIVELOG mode.
You are working on a database where all the tablespaces are locally managed.
You are working on a database where control files and redo log files are multiplexed.
You are working on a database where control files and redo log files are not multiplexed.