Clients using cisco-leap and eap-fast authentication are having no problems logging on to The wireless network， but clients using peap are failing to log on. Which situation would result in this type of problem？（）A、posture validation has not been enabled

题目

Clients using cisco-leap and eap-fast authentication are having no problems logging on to The wireless network， but clients using peap are failing to log on. Which situation would result in this type of problem？（）

  • A、posture validation has not been enabled.
  • B、the aaa server is set to accept both ms-chap v2 and gtc for peap authentication.
  • C、clients and server are not using certificates.
  • D、clients have been set to validate the server identity.
相似考题

1.(b) Using the information contained in Appendix 1.1, discuss the financial performance of HLP and MAS,incorporating details of the following in your discussion:(i) Overall client fees (total and per consultation)(ii) Advisory protection scheme consultation ‘utilisation levels’ for both property and commercial clients(iii) Cost/expense levels. (10 marks)

2.What is the purpose of configuring router R1 with the "IP Helper address" command？（）A、IP Helper is used to direct BOOTP clients to a BOOTP serverB、IP Helper is used to prevent the router form forwarding IP broadcastsC、IP Helper is used to allow IPX clients to communicate with IP-based serversD、IP Helper is used to accommodate compatibility routers using different IP routing protocolsE、None of the other alternatives apply

3.What is the purpose of the WLC Controller->Multicast->IGMP Timeout feature operating on v5.2?（）A、to determine if there are more clients that are using the multicast streamB、to limit the time that a client has to request an IGMP join to the controller multicast groupC、to determine if the multicast router is still alive and responding to multicast clientsD、to remove clients from the multicast group if the multicast traffic exceeds the allotted bandwidth allowed for multicast clients

4. Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network， but clients using PEAP are failing to log on. Which situation would result in thistype ofproblem？（）A、Posture validation has not been enabledB、The AAA server is set to accept both MS-CHAP v2 and GTC for PEAP authenticationC、Clients and server are not using certificatesD、Clients have been set to validate the server identity

更多“Clients using cisco-l”相关问题

  • 第1题：

    Which of the following statements explains why it is normally best to have more than one controller-basedaccess point participate in the containment of one rogue access point？（）

    • A、Multiple controller-based access points will load-balance the containment task using fewer resources than a single access point.
    • B、Clients connected to the rogue access point may be out of the range of the controller-based access point providing containment.
    • C、Each controller-based access point can handle only a limited amount of clients connected to the rogue access points.
    • D、Clients connected to the rogue access point must be able to connect to the containment controller-based access point.

    正确答案:B

  • 第2题：

    Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?（）

    • A、A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, and finally  to all wireless clients of that Cisco WLC, via wireless multicast.
    • B、A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, and finally to  all wireless clients of that Cisco WLC, via wireless unicast.
    • C、A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded  at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients  via wireless multicast.
    • D、A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at  APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients  via wireless multicast.
    • E、A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded  at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients  via wireless unicast.
    • F、A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at  APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients  via wireless unicast.

    正确答案:C

  • 第3题：

    Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network，but clients using PEAP are failing to log on. Which situation would result in thistype ofproblem？（）

    • A、Posture validation has not been enabled.
    • B、The AAA server is set to accept both MS-CHAP v2 and GTC for PEAP authentication.
    • C、Clients and server are not using certificates.
    • D、Clients have been set to validate the server identity.

    正确答案:C

  • 第4题：

    What restrictions apply to using virtual Ethernet within a cluster containing VIO clients？（）

    • A、IPAT via Aliasing must be used
    • B、IPAT via Replacement must be used
    • C、Resilience must be provided by the use of dual VIO servers
    • D、Hardware Address Takeover （HWAT） must be used to ensure a consistent virtual MAC address

    正确答案:A

  • 第5题：

    Your company has deployed Network Access Protection （NAP）.You configure secure wireless access to the network by using 802.1X authentication from any access point. You need to ensure that all client computers that access the network are evaluated by NAP.  What should you do？（）

    • A、Configure all access points as RADIUS clients to the Remediation Servers.
    • B、Configure all access points as RADIUS clients to the Network Policy Server （NPS）.
    • C、Create a Network Policy that defines Remote Access Server as a network connection method.
    • D、Create a Network Policy that specifies EAP-TLS as the only available authentication method.

    正确答案:B

  • 第6题：

    Your company has deployed Network Access Protection （NAP). You configure secure wireless access to the network by using 802.1x authentication from any access point. You need to ensure that all client computers that access the network are evaluated by NAP.  what should you do（）？ 

    • A、Configure all access points as RADIUS clients to the Remediation Servers
    • B、Configure all access points as RADIUS clients to the Network Policy Server （NPS）
    • C、Create a Network Policy that defines Remote Access Server as a network connection method
    • D、Create a Network Policy that specifies EAP-TLS as the only availible authentication method.

    正确答案:B

  • 第7题：

    单选题
    You are designing a Windows Azure application that will generate events for multiple clients. Client web services might be behind NAT gateways.  You need to recommend an approach that will allow you to broadcast the events to clients.  What should you recommend？（）
    A

     Use ADO.NET Data Services and provide a shared key to clients.

    B

     Use Windows Azure Queues and provide a shared key to clients.

    C

     Use Windows Azure Table storage and providea shared key to clients.

    D

     Use the Windows Azure AppFabric Service Bus and provide a shared secret to clients.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    多选题
    You are designing a service that will use the Windows Azure AppFabric Service Bus.  You need to recommend an approach for controlling access to the service by using the Windows Azure AppFabric Access Control Service. Which two actions should you recommend？（）
    A

    Configure the service to not require authentication.

    B

    Configure the service to require a relay access token.

    C

    Specify message security for all communications between clients and the service.

    D

    Specify transport security for allcommunications between clients and the service.


    正确答案： A,B
    解析： 暂无解析

  • 第9题：

    单选题
    Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network， but clients using PEAP are failing to log on. Which situation would result in thistype ofproblem？（）
    A

    Posture validation has not been enabled

    B

    The AAA server is set to accept both MS-CHAP v2 and GTC for PEAP authentication

    C

    Clients and server are not using certificates

    D

    Clients have been set to validate the server identity


    正确答案： B
    解析： 暂无解析

  • 第10题：

    多选题
    The Company wireless network is using 802.11G access points.  Which two statements are true  about these access points？ （）
    A

    It supports eight different data rates.

    B

    It is fully backward compatible with 802.11b

    C

    It provides the same network throughput with 802.11b clients， 802.11g clients， or a mixed  environment where both clients are present.

    D

    It is only compatibly with the 11 Mbps 802.11b transfer rate.

    E

    It has three non-overlapping channels in its channel options.


    正确答案： E,A
    解析： 暂无解析

  • 第11题：

    单选题
    What is the purpose of the WLC Controller->Multicast->IGMP Timeout feature operating on v5.2?（）
    A

    to determine if there are more clients that are using the multicast stream

    B

    to limit the time that a client has to request an IGMP join to the controller multicast group

    C

    to determine if the multicast router is still alive and responding to multicast clients

    D

    to remove clients from the multicast group if the multicast traffic exceeds the allotted bandwidth allowed  for multicast clients


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Your company has an Active Directory Domain Services (AD DS) domain. You have a main office and a branch office that are connected by a slow WAN link. All servers are located in the main office. You virtualize an application by using Microsoft Application Virtualization (App-V) 4.5. The available bandwidth is not sufficient for branch office users to run the virtualized application. You need to ensure that branch office users can run the virtualized application by using the Microsoft Application Virtualization Desktop Client. What should you do?（）
    A

    On each App-V server in the main office, upgrade the App-V desktop clients to 4.6.

    B

    On each client computer in the branch office, upgrade the App-V desktop clients to 4.6.

    C

    On each client computer in the branch office, install the application by using Windows Installer (.msi) files created by the App-V Sequencer.

    D

    In the Microsoft System Center Application Virtualization Management Server, configure an Application Virtualization file server for the main office.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    When using which application may it be necessary to deploy access points in monitor-only mode？（）

    • A、voip
    • B、rfid tags
    • C、data collection
    • D、802.11b and g clients

    正确答案:A

  • 第14题：

    The Company wireless network is using 802.11G access points.  Which two statements are true  about these access points？ （）

    • A、 It supports eight different data rates.
    • B、 It is fully backward compatible with 802.11b
    • C、 It provides the same network throughput with 802.11b clients， 802.11g clients， or a mixed  environment where both clients are present.
    • D、 It is only compatibly with the 11 Mbps 802.11b transfer rate.
    • E、 It has three non-overlapping channels in its channel options.

    正确答案:B,E

  • 第15题：

    A customer is deploying a wireless core feature set using autonomous access points and requires Layer 2 roaming. What is a requirement when deploying this solution？（）

    • A、 a minimum of one Cisco 4100 Series WLAN Controller
    • B、 one WDS per subnet
    • C、 a minimum of one Wireless LAN Services Module
    • D、 all clients using Cisco Aironet Wireless LAN Adapters

    正确答案:B

  • 第16题：

    You have an Active Directory domain named contoso.com.You have an Exchange Server 2010  organization that contains a Client Access server named CAS1.Users connect to CAS1 from the Internet by using mail.contoso.com.The organization contains the following mobile clients：  （1）Windows Mobile 5.0 （2）Windows Mobile 6.1  （3）Windows Mobile 6.5  You plan to install a certificate on CAS1.You need to ensure that all clients can connect to CAS1 from the Internet by using Exchange ActiveSync.Which name should you include in the certificate？（）

    • A、contoso.com
    • B、CAS1.contoso.com
    • C、EAS.contoso.com
    • D、mail.contoso.com

    正确答案:D

  • 第17题：

    You have a Hub Transport server named Server1 that runs Exchange Server 2010.All Exchange users use IMAP4 to retrieve e-mail.You need to ensure that all users can send e-mail by using SMTP.Your solution must not require any modifications to the default connectors. What should you do？（）

    • A、Configure IMAP4 clients to send e-mail by using TCP port 25.
    • B、Configure IMAP4 clients to send e-mail by using TCP port 587.
    • C、Create a new Send connector and configure the connector to use port 110.
    • D、Create a new Send connector and configure the connector to use port 143.

    正确答案:B

  • 第18题：

    单选题
    When using which application may it be necessary to deploy access points in monitor-only mode？（）
    A

    voip

    B

    rfid tags

    C

    data collection

    D

    802.11b and g clients


    正确答案： A
    解析： 暂无解析

  • 第19题：

    单选题
    Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to the wirelessnetwork， but clients using PEAP are failing to log on. Which situation would result in this type of problem？（）
    A

    The AAA server is set to accept both MS-CHAP v2 and GTC for PEAP authentication.

    B

    Clients have been set to validate the server identity.

    C

    Posture validation has not been enabled.

    D

    Clients and server are not using certificates.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    You have an Active Directory domain named contoso.com.You have an Exchange Server 2010  organization that contains a Client Access server named CAS1.Users connect to CAS1 from the Internet by using mail.contoso.com.The organization contains the following mobile clients：  （1）Windows Mobile 5.0 （2）Windows Mobile 6.1  （3）Windows Mobile 6.5  You plan to install a certificate on CAS1.You need to ensure that all clients can connect to CAS1 from the Internet by using Exchange ActiveSync.Which name should you include in the certificate？（）
    A

    contoso.com

    B

    CAS1.contoso.com

    C

    EAS.contoso.com

    D

    mail.contoso.com


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network，but clients using PEAP are failing to log on. Which situation would result in thistype ofproblem？（）
    A

    Posture validation has not been enabled.

    B

    The AAA server is set to accept both MS-CHAP v2 and GTC for PEAP authentication.

    C

    Clients and server are not using certificates.

    D

    Clients have been set to validate the server identity.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    Your company has an Active Directory Domain Services (AD DS) domain. You have a main office and a branch office that are connected by a slow WAN link. All servers are located in the main office. You virtualize an application by using Microsoft Application Virtualization (App - V) 4.5. The available bandwidth is not sufficient for branch office users to run the virtualized application. You need to ensure that branch office users can run the virtualized application by using the Microsoft Application Virtualization Desktop Client. What should you do?（）
    A

    On each App - V server in the main office, upgrade the App - V desktop clients to 4.6.

    B

    On each client computer in the branch office, upgrade the App - V desktop clients to 4.6.

    C

    On each client computer in the branch office, install the application by using Windows Installer (.msi) files created by the App - V Sequencer.

    D

    In the Micr osoft System Center Application Virtualization Management Server, configure an Application Virtualization file server for the main office.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    What is the purpose of configuring router R1 with the "IP Helper address" command？（）
    A

    IP Helper is used to direct BOOTP clients to a BOOTP server

    B

    IP Helper is used to prevent the router form forwarding IP broadcasts

    C

    IP Helper is used to allow IPX clients to communicate with IP-based servers

    D

    IP Helper is used to accommodate compatibility routers using different IP routing protocols

    E

    None of the other alternatives apply


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    A customer is deploying a wireless core feature set using autonomous access points and requires Layer 2 roaming. What is a requirement when deploying this solution？（）
    A

     a minimum of one Cisco 4100 Series WLAN Controller

    B

     one WDS per subnet

    C

     a minimum of one Wireless LAN Services Module

    D

     all clients using Cisco Aironet Wireless LAN Adapters


    正确答案： A
    解析： 暂无解析

相关内容